If I can get accurate measurements and info, I could look into doing a run of boxes...
-Magnoli
-Magnoli
Bourne Identity Red Bag contents
- Thread starter asavage
- Start date
I flattened the image out and based the measurements off the amex card and the cash, the tray appears to be about 14" long by 12" wide. The hardest part is going to be getting the curved end right.
p.s. just noticed the tray has a notch out of the side wall at either end.
edit: re checked after looking at kurtyboy's post, results matched 14x12 once I took into account the bend in both the box and the tray.
p.s. just noticed the tray has a notch out of the side wall at either end.
edit: re checked after looking at kurtyboy's post, results matched 14x12 once I took into account the bend in both the box and the tray.
Last edited:
Oh PS...
It wasn't in the bank box, but I've posted my beginnings of the Blackbriar file over in the paper props section. If anybody wants the original files to continue working on them, let me know.
http://www.therpf.com/f40/bourne-supremacy-164220/#post2543309
It wasn't in the bank box, but I've posted my beginnings of the Blackbriar file over in the paper props section. If anybody wants the original files to continue working on them, let me know.
http://www.therpf.com/f40/bourne-supremacy-164220/#post2543309
greylocke
Sr Member
Why is it when I look at the box I immediately think document or sample case? My father was an attorney and I've seen similar metal cases used by attorneys for protecting evidence in court cases. So I'm thinking we should look for a document case or a sample case before commissioning a run of cases.
Mark
Mark
After doing some number crunching, doing a run of stainless steel bins would be an expensive project. I'd have to do about 100 bins to make it worth doing, and the cost would be $150 (shipped to US/Europe) or $175 (shipped to Austalia/Asia/Russia). There would be good discounts for anyone interested in multiple bins ($210 for two or $275 for three). Shipping is the killer here.
Well, considering that I've only sold 30 or so bags at $70, I can't imaging we could build enough interest for 100 bins at $150 each. Regardless, I've started an interest thread to see if I'm wrong:
http://www.therpf.com/f13/bourne-identity-steel-bank-bin-trash-can-164405/
http://www.therpf.com/f13/bourne-identity-steel-bank-bin-trash-can-164405/
Nope, the waste bin/trash can. After pricing those out... I'm scared to even start looking into the bank box!
MandoMan531
Active Member
Wow, glad I ran across this thread. Good stuff in here.
Indy- I may be interested in one of those bags in the near future.
Indy- I may be interested in one of those bags in the near future.
@asavage which version of the safe deposit box are you thinking of making?
The one the usher pretends to unlock, that probably doesn't open (with the almost perfectly even bands) or the one bourne opens that couldn't be carried vertically (with the thinner silver bands and visible tubular lock inside)?
The one the usher pretends to unlock, that probably doesn't open (with the almost perfectly even bands) or the one bourne opens that couldn't be carried vertically (with the thinner silver bands and visible tubular lock inside)?
Hybrid01Angel
New Member
Good luck on that
Did any of you manage to snag a lexon knife today, I spotted it but couldn't get the guy to ship to the UK. 
View attachment 125566View attachment 125567
I would like to see this made. God only knows how much it would cost, it seems simple enough, I've made more complicated stuff at my old job.
View attachment 125566View attachment 125567
I would like to see this made. God only knows how much it would cost, it seems simple enough, I've made more complicated stuff at my old job.
Where did you see it posted? I have been checking eBay with no luck, I hope I didn't miss it again!
ebay.com had it, but it is gone for $22.50.
Similar threads
