Reply to thread

Message: <blockquote data-quote="blickfangQ2" data-source="post: 5250736" data-attributes="member: 46145">Hi everybody,every once in a while I take opportunities that present themselves. I was able to get my hands on one of the last NECA 1:1 IronMan 46 statues in Germany.Since the finish is questionable to say the least, I knew I had to overhaul the whole statue and finish it closer to my understanding of qualityMy plans are pretty straightforward:1) replace all reactor-screws2) replace the Arc Reactor3) replace the eyes4) put LEDs in every bit that lights up - so cable management through foam is needed5) grind all seam lines out and touch up all blemishes that I can find6) maybe add some vent details and other little things that I might want to make more accurate7) coat everything in ****** let’s say something for now. I’m not sure yet…8) prime and finish9) convince the wife to let it stand in the living room</blockquote>

Your message may be considered spam for the following reasons:

Your new thread title is very short, and likely is unhelpful.
Your reply is very short and likely does not add anything to the thread.
Your reply is very long and likely does not add anything to the thread.
It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
Your message is mostly quotes or spoilers.
Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
This thread is locked.