oh ok, thanksMake sure it can pull a full -30" and if it does, totally worth the investment.
My hoses were the most expensive part at about $350. The pump itself was only 103 delivered. The rest was the chamber.
oh ok, thanksMake sure it can pull a full -30" and if it does, totally worth the investment.
My hoses were the most expensive part at about $350. The pump itself was only 103 delivered. The rest was the chamber.
have you sealed the edges of your core flute? because i just realized what that material is, and when you seal it with something ( like to close off the hole ish things on the side of that board) that could add some size to your material, even if it just might be a little, i think that could cuase some trouble fitting the outsoles to your scratch mid solesSo I have finished the underside of my new custom soles. I went back to my reference pics and had to slim them a bit as well as increase the angles of the part where the inner wings attach. I also butchered one of the V1 soles where I cut the middle flat part out and this allowed me to lay the vertical boarder out flat for a template of the profile.
Look forward to it
I have that "Venus leather", the #40 poly spun super strong thread and worked out the tensions on my light industrial sewing machine. So whilst time is a factor, am hoping to make a start on some more accurate uppers soon.
Are the heel cups the same size on all sizes of the RDs?One of my next projects will be heel cups with proper inch tall MAG lettering.
I really don't know. Point is I want to create a more rounded part with the larger letters.Are the heel cups the same size on all sizes of the RDs?
Are the heel cups the same size on all sizes of the RDs?