AT-AT Kit List

Junk Pilot

Junk Pilot

Sr Member
I am in the process of identifying the kits used on the AT-AT and at the moment it is a very short list that includes the 20mm Flakvierling, Saturn V and Harrier parts.

Can anyone help out with more kits? Thanks

Also, is the list of kits and scans at studioscale.com a comprehensive list or is there still many more missing?
 
Last edited:
It would be nice to see a thread that ties in with the armature thread.

Here's a few more although I admit I haven't even given the AT-AT that thorough a look:

1/35 Tamiya Sd.Kfz Leichter 222
1/35 Tamiya T34/76
1/35 Tamiya M16 Multiple Gun Motor Carriage
1/35 Tamiya Chieftan Mk.5
1/35 Tamiya Leopard
1/35 Tamiya Matilda
1/35 Tamiya Marder 1A2 Milan
1/700 Tamiya Nelson Battleship
1/12 Tamiya (any F1 with a Ford DFV Engine)
1/72 Hasegawa Morser Karl

2" pre-heater hosing for the neck (to be confirmed)


Reckless Pilot said:
I am in the process of identifying the kits used on the AT-AT and at the moment it is a very short list that includes the 20mm Flakvierling, Saturn V and Harrier parts.

Can anyone help out with more kits? Thanks

Also, is the list of kits and scans at studioscale.com a comprehensive list or is there still many more missing?
Click to expand...
 
Last edited:
Tamiya 1/35th flakpanzer gepard No.3599 has parts for the underside, and the Kampfpanzer Leopard No.35064 has those vents that are on the rear butt panel near the plates from the Flakvierling

Phil
 
Last edited:
I'd also like to know what kits were used for the chin and cheek guns.

I know the chin guns were 1/35 King Tiger tank barrels and the cheek guns were from a 1/35 20mm Flakvierling but what are the other kits, if any?

On one of the "hero" models (which the MR AT-AT is based on) it actually looks like there were two Flakvierling gun used on each cheek, one which was shortened.

And what is the cylinderical piece the gun sits in?
 
NICE!

This is exactly the thread that I was looking for. I was wondering what 1/35 Tamiya kits where used on the AT-AT.

I read that the 1/48 flakvierling can be used to detail the Revell AT-AT, I was thinking about the other kits as well.

Thank you for this thread!
 
Scratchy said:
NICE!

This is exactly the thread that I was looking for. I was wondering what 1/35 Tamiya kits where used on the AT-AT.

I read that the 1/48 flakvierling can be used to detail the Revell AT-AT, I was thinking about the other kits as well.

Thank you for this thread!
Click to expand...

Believe it or not Scratchy even the 1/48 Flakvierling is slightly oversize for this kit but it is still usable. Am still trying to get 2 1/48 King Tiger gun barrels but rather than buying two complete kits I may end up buying the replacement metal barrels instead seeing as thay are about 70% cheaper than the kits themselves. But I still would prefer the kit barrels all the same though.
 
Junk Pilot said:
Believe it or not Scratchy even the 1/48 Flakvierling is slightly oversize for this kit but it is still usable. Am still trying to get 2 1/48 King Tiger gun barrels but rather than buying two complete kits I may end up buying the replacement metal barrels instead seeing as thay are about 70% cheaper than the kits themselves. But I still would prefer the kit barrels all the same though.
Click to expand...

The gun barrels are not from the King Tiger (if you're talking about the chin gun barrels)...

Here's the correct kitpart (the nozzle is not cut, those are untouched kitparts, the 2 halves are just glued together) :

foundpart3.jpg


Here the KT barrel :

tamiya%20king%20tiger%201-35%20parts6.jpg
 
I thought it was from a Panther. I was very happy when I did this find, it's from the Tamiya 1/35 sturmgeschütz III (you want the old tooling, not the one available now). Ive got most of the parts ID'ed now, still 5 or 6 to find on the AT-AT though...
 
Junk Pilot said:
That was the first thing I did when Monsieur Tox mentioned it and although I believe it is the Ausf G variant that is required it has the end on the muzzle which is unlike the image that MT is holding.
Click to expand...

That's because the very front of the nozzle is a separate part on the vintage 1/35 Sturm III, I think it is part of both halves of the barrel parts in the 1/48 just like in most of the kits. So you'll have to cut it.
 
I'm looking to find some Cheek Guns for my Master Replica AT-AT. Is there a replacement for these? I have really had issues finding them. Thanks in advance.
 
You could have a go at scratching them...tamiya flakvierling, bit of tubing, plastic card..Like this..


IMG_0832.jpg


phil
 
Hey Phil, is that AT-AT head a scratch of yours mate, looks amazing?.
If it is how far along are you on the build, love to see more pics dude!.
Hah, guess the Falcon takes up a lot of your time so you may have been concentrating more on that?.
Anyhoo, love to know Phil.
Stu
 
Think that was Phils Ron kit build Stu, bloomin marvellous!
We really do need an alloy stop mo armature for one of these, no silly bits, just an accurate armature dimension wise!

Lee
 
You must log in or register to reply here.

Similar threads

N
AT ST rotj questions
Replies
13
Views
807
north3
N
Redfinger
AT-ST Koolshade reference
Replies
5
Views
730
Redfinger
Redfinger
Redfinger
Parts ID, ROTJ AT-ST
Replies
9
Views
761
joberg
joberg
Boxcar Bret
PART ID HELP: Empire AT-ST Chin Gun
Replies
3
Views
481
chazzychaz
chazzychaz
N
AT AT parts help ….
Replies
17
Views
2,098
PeetL
PeetL
Back
Top