Antidote Vial Kit from INDIANA JONES AND THE TEMPLE OF DOOM. Last few available!

After a successful Run of 4 rounds on the Prop Runs Forum, interest over there has dried up, and I have only 1 kit left!



NOTE: THIS IS A MODEL KIT. YOU WILL NEED TO PAINT, GLUE, AND ASSEMBLE IT YOURSELF.

Hours have been spent in research and accuracy of this Antidote Vial replica kit from the 1984 film INDIANA JONES AND THE TEMPLE OF DOOM. Update your Indy props display with this highly accurate kit, brought to you by cjunco1937, chubsANDdoggers and myself!

Price is $23 per kit. Shipping is included for free for U.S. shipments. If you are outside the U.S., $10 will be added to your order regardless of quantity.

Please do not use the "Buy now" button...DM me directly to order. Thank you!

Please DM me to reserve your kit today!

You will receive:

- 6-dram glass vial & original lid.
- Resin 3D-printed threaded cap.
- Rhinestone gems (bold colors).
- Rhinestone gems (subtle colors).
- O-ring seal.

You will need:

- Sandpaper (600 or 800 grit)
- Gold paint
- Masking Tape
- Superglue
- Blue-green fluid

To assemble:

1. Sand the bottom rim lightly with 800-grit sandpaper.
2. Paint the cap in gold. Weather it to your taste.
3. Choose your rhinestones
4. Glue the rhinestones to the painted cap.
5. Mask and paint gold rings on the vial.
6. Place the o-ring inside the cap. It will be a tight fit.
7. Fill the vial with your fluid of choice.
8. Screw on the cap very tightly. Be careful not to put fingerprints into the gold cap!

And DO NOT OVER-TIGHTEN, or the cap might crack!

More details can be found in the Prop Run Thread.

 

[Astyanax]

Additional photos:

 

[Lndelof10]

After a successful Run of 4 rounds on the Prop Runs Forum, interest over there has dried up, and I have only 1 kit left!

View attachment 1839033

NOTE: THIS IS A MODEL KIT. YOU WILL NEED TO PAINT, GLUE, AND ASSEMBLE IT YOURSELF.

Hours have been spent in research and accuracy of this Antidote Vial replica kit from the 1984 film INDIANA JONES AND THE TEMPLE OF DOOM. Update your Indy props display with this highly accurate kit, brought to you by cjunco1937, chubsANDdoggers and myself!

Price is $23 per kit. Shipping is included for free for U.S. shipments. If you are outside the U.S., $10 will be added to your order regardless of quantity.

Please do not use the "Buy now" button...DM me directly to order. Thank you!

Please DM me to reserve your kit today!

You will receive:

- 6-dram glass vial & original lid.
- Resin 3D-printed threaded cap.
- Rhinestone gems (bold colors).
- Rhinestone gems (subtle colors).
- O-ring seal.

You will need:

- Sandpaper (600 or 800 grit)
- Gold paint
- Masking Tape
- Superglue
- Blue-green fluid

To assemble:

1. Sand the bottom rim lightly with 800-grit sandpaper.
2. Paint the cap in gold. Weather it to your taste.
3. Choose your rhinestones
4. Glue the rhinestones to the painted cap.
5. Mask and paint gold rings on the vial.
6. Place the o-ring inside the cap. It will be a tight fit.
7. Fill the vial with your fluid of choice.
8. Screw on the cap very tightly. Be careful not to put fingerprints into the gold cap!

And DO NOT OVER-TIGHTEN, or the cap might crack!

More details can be found in the Prop Run Thread.

Hi! I just bought this from you on Etsy. I was looking on Google and found that you're on RPF like me, aaanyway, I'm wondering what the difference is between the sets of stones?
Did they use 2 different sets on multiple viles during production? Which order should I put them on for screen accuracy? Also, do I put the black ring all the way into the lid before I screw it shut? Or does the ring go at the rim of the edge of the open part of the cap?
Thank you!

 

[Astyanax]

Welcome! Here are your answers:

I'm wondering what the difference is between the sets of stones?

Each set consists of seven stones: 1 yellow, three green, and three blue. You can choose which set you would like to use. Some people prefer the bolder colors of one set, and others (like myself) prefer the more subtle colors of the other set. You can choose your set, or you can mix and match according to your preference.

No preference? Then I recommend using Google and looking at some movie screen shots or archive images.

Did they use 2 different sets on multiple viles during production?

No. It's just hard to tell how vibrant the colors are, so it's up to you!

Which order should I put them on for screen accuracy?

The yellow stone goes in the center, and the blue and green ones alternate around the center.

Also, do I put the black ring all the way into the lid before I screw it shut? Or does the ring go at the rim of the edge of the open part of the cap?
Thank you!

Either of those approaches should accomplish the same thing. I prefer to grease the o-ring with a little silicone grease first, and then tuck it down as far is it will go into the lid. Remember not to over-tighten!

Thanks,
Bill

 

[Lndelof10]

Welcome! Here are your answers:



Each set consists of seven stones: 1 yellow, three green, and three blue. You can choose which set you would like to use. Some people prefer the bolder colors of one set, and others (like myself) prefer the more subtle colors of the other set. You can choose your set, or you can mix and match according to your preference.

No preference? Then I recommend using Google and looking at some movie screen shots or archive images.



No. It's just hard to tell how vibrant the colors are, so it's up to you!



The yellow stone goes in the center, and the blue and green ones alternate around the center.



Either of those approaches should accomplish the same thing. I prefer to grease the o-ring with a little silicone grease first, and then tuck it down as far is it will go into the lid. Remember not to over-tighten!

Thanks,
Bill

I shall abide
Those were all great answers!! Thank you for taking the time to answer them individually! I really do appreciate you for that, thank you!

 

[Astyanax]

My pleasure, good luck, and reach out if you have more questions!

 

[Lndelof10]

My pleasure, good luck, and reach out if you have more questions!

So, I'm hearing through the great vine that you also make a good Raiders temple dart?? Is there any way I can see that? I might have some interest if what I'm hearing is true ... Wait, you're name is Bill??? Are you Bill Dodd???

 

[Astyanax]

LOL no, I'm not Bill Dodd, but appreciate the association!
And yes, I have a couple Temple Dart kits left here...unfinished only!

Done / Completed - TEMPLE DART from Raiders, Chachapoya / Hovitos

I am offering a few highly authentic looking replicas of the "Temple Dart" vial from Raiders of the Lost Ark as a raw kit, primed, or fully finished prop replica for your Indiana Jones collection! (Final version is the dart on the left with the STRING wrap. The wire wrap was an experiment...

www.therpf.com