Advice on a durable Clear Coat for Flash Hiders?

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.


Barcslay

New Member
Hey guys! Finishing up an ESB DL-44 build and was wondering what clear you guys would use for the flash hider?

I used future floor wax on my last DL-44, but it still rubbed through after pulling in and out of the holster a couple of times. I then coated it with clear 2 part epoxy which is way more durable, but is far too glossy.

Any advice is appreciated!
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Dann

Master Member
RPF PREMIUM MEMBER
Yeah, do what Cameron said. Heh. Do a few coats and give it time to cure when you're done.
 

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top