Accurate Darth Vader Helmet STL?

here
let me know anything you need
thanks for your support

Are you gonna do OT shin files?
 
1600739015644.png

FRESH OFF THE BED total print time 122 hours
 
so just bought 4 rolls of filament so gonna start on the mask as soon as they get here and get this got the mask ready to go and it's gonna use 611g it beats my anh mask by about 389g
 
Some images of the Original Trilogy Shins i model
 

Attachments

  • 2020-09-24_20-13-49.png
    2020-09-24_20-13-49.png
    402.5 KB · Views: 106
  • 2020-09-24_20-13-59.png
    2020-09-24_20-13-59.png
    565.5 KB · Views: 111
  • 2020-09-24_20-14-36.png
    2020-09-24_20-14-36.png
    509.9 KB · Views: 105
  • 2020-09-24_20-15-24.png
    2020-09-24_20-15-24.png
    362.6 KB · Views: 110
  • render1.jpg
    render1.jpg
    191.7 KB · Views: 102
  • render2.jpg
    render2.jpg
    170.3 KB · Views: 95
  • render3.jpg
    render3.jpg
    164.8 KB · Views: 103
  • sample 23.jpg
    sample 23.jpg
    488.5 KB · Views: 106
zyltech is good stuff! Uh-mer-ikan company. I used their purple for a Mando helmet.

It *IS* pla though, so coat it with something stronger, less brittle
 
zyltech is good stuff! Uh-mer-ikan company. I used their purple for a Mando helmet.

It *IS* pla though, so coat it with something stronger, less brittle
yeah i learned that the hard way after i got done with the dome for my first helmet i dropped it by accident and it chipped it still shows but with the paint you have to 0__0 at it to see it
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top