Accurate 3D printable starlord helmet needed

[Bengrim09]

I’m looking for an accurate STL file for star lords helmet
I’ve printed one of thingyverse, not accurate but a great practice piece

Still working progress
I’m now looking for a more accurate one
I’ve looked at Do3d and CGTrader is there anymore or are these the best out there
Thanks
Ben

 

[offearth]

I’m looking for an accurate STL file for star lords helmet
I’ve printed one of thingyverse, not accurate but a great practice piece
View attachment 1022777View attachment 1022778
Still working progress
I’m now looking for a more accurate one
I’ve looked at Do3d and CGTrader is there anymore or are these the best out there
Thanks
Ben

Do3D is the most accurate I’ve seen. I’ve also printed it. If you haven’t yet check GrabCad

 

[Bengrim09]

Do3D is the most accurate I’ve seen. I’ve also printed it. If you haven’t yet check GrabCad

I will check that out cheers

 

[NeroMakes]

Necrosster on Etsy has a great model.

 

[propcollector]

I’m looking for an accurate STL file for star lords helmet
I’ve printed one of thingyverse, not accurate but a great practice piece
View attachment 1022777View attachment 1022778
Still working progress
I’m now looking for a more accurate one
I’ve looked at Do3d and CGTrader is there anymore or are these the best out there
Thanks
Ben

What did you use for the braided tube on the side three tubes?

 

[Bengrim09]

What did you use for the braided tube on the side three tubes?

I made a cast of some actual metal braided pipe
I also added some extra raised pieces around the hole that the braided pieces sit into
I designed them in autocad and printed them, glued them onto the mask before paint

 

[Bengrim09]

I bought and downloaded the do3d helmet
Mmmmm
Not impressed with the accuracy at all

don’t waste your money people

 

[ToaOfStone]

I bought and downloaded the do3d helmet
Mmmmm
Not impressed with the accuracy at all

don’t waste your money people

Did the model they send you come with all the pieces separated or did they send you the "welded" model?

I bought the model in April and it drives me nuts that they don't mention this on their site.

 

[Bengrim09]

Did the model they send you come with all the pieces separated or did they send you the "welded" model?

I bought the model in April and it drives me nuts that they don't mention this on their site.

All connected
This is “ the most accurate mask out there ”
(so they say ) I was sold

not equal and out of shape
Also at the front the where the canisters have little bent pipes that meet the mask, they are set to far back in the canister not up front where you can see the mesh

first pic is printed and primed

Seconded is rubbed filled and first coat
Do3d mask

Third pic is a mask from thingyverse
I re made the little pipes at the front, added some mesh and a little ring round the mesh to hide the cut edge

the last pic is an original mask that’s on show

 

[propcollector]

No I bought the kirinprop mask on Etsyit don’t have the braided wire on it

 

[propcollector]

 

[ToaOfStone]

All connected
This is “ the most accurate mask out there ”
(so they say ) I was sold
View attachment 1075084View attachment 1075085View attachment 1075086
not equal and out of shape
Also at the front the where the canisters have little bent pipes that meet the mask, they are set to far back in the canister not up front where you can see the mesh

first pic is printed and primed

View attachment 1075087

Seconded is rubbed filled and first coat
Do3d mask
View attachment 1075088

Third pic is a mask from thingyverse
I re made the little pipes at the front, added some mesh and a little ring round the mesh to hide the cut edge

View attachment 1075089

the last pic is an original mask that’s on show
View attachment 1075090

That's a bummer, I don't get why they welded the pieces.
The cheek pipes are pushing out of their borders and look awful. I tried contacting them for help and all they did was send me the first generation model with even more inaccuracies.
I'm with lasher, go for the Necrosster model. I got it a while back and it's more accurate and modular to boot. The latest version comes with a removable face plate and is easier to assemble.

 

[Bengrim09]

That's a bummer, I don't get why they welded the pieces.
The cheek pipes are pushing out of their borders and look awful. I tried contacting them for help and all they did was send me the first generation model with even more inaccuracies.
I'm with lasher, go for the Necrosster model. I got it a while back and it's more accurate and modular to boot. The latest version comes with a removable face plate and is easier to assemble.

can you post a link

 

[Bengrim09]

View attachment 1075122

Oooooo I got to get me one of these
That’s very clean

 

[ToaOfStone]

can you post a link

This item is unavailable - Etsy

Find the perfect handmade gift, vintage & on-trend clothes, unique jewelry, and more… lots more.

www.etsy.com

The only thing it's missing are two little rivets on the back plate of the helmet, but those are easy to add yourself.