Accurate 3D printable starlord helmet needed

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Bengrim09

Sr Member
RPF PREMIUM MEMBER
I’m looking for an accurate STL file for star lords helmet
I’ve printed one of thingyverse, not accurate but a great practice piece
757D2863-B2D0-4A9F-AE24-DDCA8B44238D.jpeg
E66C8FB6-C14B-492D-8D5B-2E0E17713115.jpeg

Still working progress
I’m now looking for a more accurate one
I’ve looked at Do3d and CGTrader is there anymore or are these the best out there
Thanks
Ben
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

offearth

Member
I’m looking for an accurate STL file for star lords helmet
I’ve printed one of thingyverse, not accurate but a great practice piece
View attachment 1022777 View attachment 1022778
Still working progress
I’m now looking for a more accurate one
I’ve looked at Do3d and CGTrader is there anymore or are these the best out there
Thanks
Ben

Do3D is the most accurate I’ve seen. I’ve also printed it. If you haven’t yet check GrabCad
 

propcollector

Sr Member
RPF PREMIUM MEMBER
I’m looking for an accurate STL file for star lords helmet
I’ve printed one of thingyverse, not accurate but a great practice piece
View attachment 1022777 View attachment 1022778
Still working progress
I’m now looking for a more accurate one
I’ve looked at Do3d and CGTrader is there anymore or are these the best out there
Thanks
Ben
What did you use for the braided tube on the side three tubes?
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Bengrim09

Sr Member
RPF PREMIUM MEMBER
What did you use for the braided tube on the side three tubes?
I made a cast of some actual metal braided pipe
I also added some extra raised pieces around the hole that the braided pieces sit into
I designed them in autocad and printed them, glued them onto the mask before paint
 

ToaOfStone

New Member
I bought and downloaded the do3d helmet
Mmmmm
Not impressed with the accuracy at all

don’t waste your money people
Did the model they send you come with all the pieces separated or did they send you the "welded" model?

I bought the model in April and it drives me nuts that they don't mention this on their site.
 

Bengrim09

Sr Member
RPF PREMIUM MEMBER
Did the model they send you come with all the pieces separated or did they send you the "welded" model?

I bought the model in April and it drives me nuts that they don't mention this on their site.
All connected
This is “ the most accurate mask out there ”
(so they say ) I was sold
4D65CCC9-F209-4BF7-984A-6D882905E4CB.jpeg
0A2811E3-6689-49F3-9060-0AE7FDBA3FF2.jpeg
49CBB7F8-5E71-4E6A-B85E-1961C7E93AF0.jpeg

not equal and out of shape
Also at the front the where the canisters have little bent pipes that meet the mask, they are set to far back in the canister not up front where you can see the mesh

first pic is printed and primed

00EA1F1C-0DC7-44C9-93AE-A08EF5A88AA7.jpeg


Seconded is rubbed filled and first coat
Do3d mask
3C4CD4EB-4F8D-4D06-A53D-09052F99106C.jpeg


Third pic is a mask from thingyverse
I re made the little pipes at the front, added some mesh and a little ring round the mesh to hide the cut edge

B52B5DD5-3A84-4B83-83E7-A82ACF03D08F.jpeg


the last pic is an original mask that’s on show
1C0C897E-597D-4FBF-8BD1-D738C1A16B14.jpeg
 
Last edited:

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

ToaOfStone

New Member
All connected
This is “ the most accurate mask out there ”
(so they say ) I was sold
View attachment 1075084 View attachment 1075085 View attachment 1075086
not equal and out of shape
Also at the front the where the canisters have little bent pipes that meet the mask, they are set to far back in the canister not up front where you can see the mesh

first pic is printed and primed

View attachment 1075087

Seconded is rubbed filled and first coat
Do3d mask
View attachment 1075088

Third pic is a mask from thingyverse
I re made the little pipes at the front, added some mesh and a little ring round the mesh to hide the cut edge

View attachment 1075089

the last pic is an original mask that’s on show
View attachment 1075090
That's a bummer, I don't get why they welded the pieces.
The cheek pipes are pushing out of their borders and look awful. I tried contacting them for help and all they did was send me the first generation model with even more inaccuracies.
I'm with lasher, go for the Necrosster model. I got it a while back and it's more accurate and modular to boot. The latest version comes with a removable face plate and is easier to assemble.
 

Bengrim09

Sr Member
RPF PREMIUM MEMBER
That's a bummer, I don't get why they welded the pieces.
The cheek pipes are pushing out of their borders and look awful. I tried contacting them for help and all they did was send me the first generation model with even more inaccuracies.
I'm with lasher, go for the Necrosster model. I got it a while back and it's more accurate and modular to boot. The latest version comes with a removable face plate and is easier to assemble.
can you post a link
 

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top