3 foot Ironhide cannon build for TFCON 2015


CJS

Well-Known Member
So I have been off the internets for a while but have been busy. Last year for TFCON I did a huge Optimus Prime G1 inspired gun and turned out really well. This year I decided to go with something else iconic, Ironhides Right Gatling pulse cannon,
Started with a good pile of scratchbuild crap that was lying around.
IF16zn.jpg

Now like 70% done, some more detail inside and out, prime and paint. The cannon uptop spins at about 60RPM using a butchered 12volt cordless drill with a 3"Hole saw at its core.
r78OvoL.jpg
 
This thread is more than 6 years old.

Your message may be considered spam for the following reasons:

  1. Your new thread title is very short, and likely is unhelpful.
  2. Your reply is very short and likely does not add anything to the thread.
  3. Your reply is very long and likely does not add anything to the thread.
  4. It is very likely that it does not need any further discussion and thus bumping it serves no purpose.
  5. Your message is mostly quotes or spoilers.
  6. Your reply has occurred very quickly after a previous reply and likely does not add anything to the thread.
  7. This thread is locked.
Top