Interest «The Heart of Siberia» lightsaber (by Lukyanov) [Available]

lukyanov

Sr Member
This saber design is a modification of the very first hilt I made in 2017. It was inspired by the Kylo Ren concept lightsaber from the visual dictionary.
However, I now feel that the design itself is more unique than what was shown in the visual dictionary.

This may be my first and last non-canon design project ever and I want to make it a special one with various improvements to the original.

PURCHASE

Ordinary KIT (300$):
01.jpg02.jpg03.jpg04.jpg05.jpg06.jpg07.jpg08.jpg09.jpg

Weathered KIT (450$):
1.jpg2.jpg3.jpg4.jpg5.jpg6.jpg7.jpg8.jpg9.jpg10.jpg11.jpg12.jpg






UPD. 25.10.2022:
«The Heart of Siberia» saber prototype is here!

More information about this hilt:
• The position of top, central and bottom parts relative to each other can be configured and secured by screws;
• No tools required for the blade/plug secured screw, just glue the knurled nut to the screw and unscrew it with your fingers;
• Don't need to disassemble any of the parts to turn on/off the kill-switch - easy access from the window in the bottom part;
• Easy access to the battery (chassis) from the bottom;
• External ‘blood’ wire can be secured with a screw inside of CC and in the bottom;
• Don't need to remove the wire to have the access to the battery;
• Rotatable cover to reveal crystal chamber;
• Brass CC with channels of copper for crystal and connector wires are included;
• Both steel belt hook and standard aluminium covertec wheel included;
• Npxl holder, chrystal itself, the chassis, the red wire can be secured inside of the saber with special screws;

3.jpg4.jpg6.jpghand_1.jpgIMG_20221025_114423_551.jpgIMG_20221025_145156_015.jpgIMG_20221025_145156_227.jpgIMG_20221025_145156_268.jpgIMG_20221025_145156_389.jpgIMG_20221025_145156_405.jpgIMG_20221025_145156_778.jpgIMG_20221025_145156_782.jpgIMG_20221025_145156_820.jpgIMG_20221025_145156_824.jpgIMG_20221025_145157_249.jpgIMG_20221025_145157_408.jpgIMG_20221025_145157_439.jpg

Compared with my other hilts:
trio.jpg

Also I decided to change two things in the batch:
• The bottom ribs will be fatter (ID will be smaller);
• Red accents will be rounded from the bottom.

Changes.jpg

3D pictures:

3.png4.png5.png6.png7.png8.pngblow.pngCC2.gif rotate 1.gif
 
Last edited:
While the "Crimson Lord" gen.2 sabers are delayed for some reasons beyond my control (the batch will arrive soon), I made a new project.

This saber design is a modification of the very first hilt I made in 2017. It was inspired by the Kylo Ren concept lightsaber from the visual dictionary.
However, I now feel that the design itself is more unique than what was shown in the visual dictionary.
Filled out and forwarded to other groups. I would like to add a suggestion of adding an optional a second non "damaged" shroud for a cleaner look. I think it would be popular. and you can still swap out the shrouds as the wire can go down the hole. and you would get the effect of shine through of the crystal.

I am looking forward to it.
 
Definitely buying one of these, hope you get the numbers you need. Having trouble from the design understanding where switches or buttons would be located.
 
Very nice. Thank you!

I just missed out on one of your creepy uncles so I'm doubly excited for this. Still sad about the creepy uncle though.

edit: creepy uncle obtained.
 
Last edited:
I'm digging the design, but would it be possible to remove or leave off the wire? or have a different colored one used if that is not the case?
 

Your message may be considered spam for the following reasons:

If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top