stargate

  1. mgoob

    Stargate Magazines $2 each

    each issue is $2 buy more and save on shipping! slightly used choose from: 14 (Jan/ Feb 2007) 17 (Jul/ Aug 2007) 20 (Jan/ Feb 2008) 23 (Jul/ Aug 2008) 25 (Nov/ Dec 2008) see photos for content pages ships from USA zip code 14620 buyer pays P&P
  2. Anders

    Unlimited Run Stargate Atlantis Asuran Gun - Pistol - Blaster

    Here is my run for Asuran Stunner (Gun, Pistol, Blaster, Whatever) Replica will be in resin, fully working (lights, moving parts) like the hero. I'll split the run every 5 units, price tag is 450€ + shipping, first shipping are estimated around September/October. Deposit is 150€. -- Run...
  3. Anders

    Interest Stargate Naquadah Generator

    Hello back everyone! I'll be starting a Naquadah Generator 'MK1' soon! Price tag will be around 600-700€ (EUR) + shipping For a fully working unit. May optionally comes with a full loaded PowerBank as an extra So digging interest to start the Project. 1. F. Z. 2. J. C. 3. Free -- Project...
  4. samura indy

    Daniel Jackson Stargate SG-1 Costume

    I'm moving to a smaller place so things have gotta go. Everything in the images is what you get. Fits about a 34" waist, 40" chest but can fit bigger or smaller. Feel free to ask questions. It has some minor damage on small areas of the jacket but is overall in perfect condition. Message me...
  5. Sendel

    DHD Original prop from Stargate : Renovation

    Here is a second project directly linked to our Life Size Stargate replica ! I think it may cause some sort of debate as we're renovating an original DHD prop as seen in episode 9 season 3 of Stargate Atlantis in which it was used to be destroyed. The base of this DHD was also used lately on...
  6. E

    Stargate Anubis costume: looking for right wrist photo

    Hi all (again), I'm looking for images of the original right wrist/gauntlet of the Anubis costume. This part differs from the left one (online there are a lot of photos about the left gauntlet) and from the one from Horus' costume. The right wrist has a "fin" on the rear wall, similar to the...
  7. E

    Stargate Helmet: looking for inner details

    Hi all, I'm working on a very detailed Stargate helmet (Horus and Anubis), and I need some photo from the original helmet. In particular I'm looking for the inner details regarding the "lobster tail". Many years ago, here on RPF, there was a photo or two about this part, unfortunately these...
  8. A

    Want to Buy ZPM Stargate

    Hello, I am on a quest to find one of the best Zero Point modules out there, Ive heard that actiprops guy used to make them, tried contacting him, he seemed rather rude to talk and wasnt really interested. Im recreating the ZPM and making it somewhat functional and am beginning to drive myself...
  9. A

    Stargate props

    Howdy everyone! So I've decided to put my skills to the test and to make a series of ZPM's with various functions! (some will be hilariously awesome) Heres my MK1 ZPM made from orange PLA in a 3d printer! 1:1 Scale replica built in 3 parts. Parts 1&2 are now perfectly glued together This...
  10. dorningt

    Stargate Universe: Kino remote build

    I wanted to make the Kino remote from Stargate Universe. I started my making depth Files for my cnc to cut. I then uploaded that to my carvewright CNC. After cutting I screwed the halves together and started painting. For the main buttons on the right I decided to use thermoplastic.
  11. D

    Want to Buy Anyone selling a STARGATE JAFFA Costume?

    looking at buying depending on price. Or i'll just make it.... Prefer to buy lol
  12. C

    Spinning Stargate Replica?

    So i have once again been pulled into the world of Stargate. Except this time I have a job. So one thing that would be really, Really cool would be a Replica of the Stargate from SG-1 with an inner ring that Actually spins. Does anyone know if something like that actually exists? Or am I going...
  13. basmith0

    What is your favorite fictional spaceship?

    I'm obsessed with spaceships. I admit it. I have a problem. Please feed my addiction by sharing your favorite shuttle, fighters, cruisers, capital ships,etc. Be sure to include the name of the ship, what it is from, and a picture if possible. I'll start by sharing a few of my favorites: The...
  14. andy19422

    Interest Stargate Universe Destiny table lamp

    I tracked down the correct lamp used to make the Destiny table lamp and was lucky enough to buy the Original studio masters used to make the molds for the greeblies. The top and bottom parts are slush cast with all other parts being solid resin. LED strip provides the lighting and you will have...
  15. andy19422

    my new project: Stargate Universe table lamp

    Always loved this lamp, so I thought I'd build it. It has taken me about six months to track down the Original lamp used to make the prop and the brass fittings used. I was very lucky to manage to buy the Original Studio masters for the Greeblies. I should have it finished by next weekend:)
  16. Fly4v

    P90 sights for a Nerf Rayven

    After watching a few too many episodes of Stargate, decided to modify a Nerf Rayven Elite to have a similar rail and sight as the P90 PDW. Here are the templates that I used for the dot sight and the side rails. The dot sight will have maglight replacement lenses when finished...
  17. S

    The "Stargate Room"

    Hi All Well finally all my Stargate props arrived from the USA -- 4 trucks, 6 guys, and 6 hours to get everything into my apartment Took me a week of work, but I've now finished the backdrop to the Stargate room Hieroglyph panels from the Ha'tak mothership, and the others panels are from the...
  18. Tom Sheldon

    Stargate Atlantis Tablets

    Hey, Since most existing SGA threads are pretty old I figured I would make a new thread to ask about the tablets used on Atlantis. I found an older topic dealing with it saying that all tablets, especially that of McKay are Motion Computing M1400s. However, I also read somewhere else that they...
  19. MolochSim

    Ronon Dex Particle Magnum

    Hi everyone. I have been lurking on here for quite some time and this is my first post. I am working on a replica of the Particle Magnum blaster used by Ronon Dex in Stargate: Atlantis. It will be made mostly from foam and thin plastic sheets. I hope to post some progress soon. I took my time...
  20. Tomperys

    Stargate Replicator with stand

    Hi I decide to build a replicator. Then I remembered of that asgard materializing platform from Ark of truth. So I took the basic shape of that platform and put some Asgard graphics there together with a text in Asgard runes. The text is readable :) Here is the result:
  21. Honus

    Animatronic Horus helmet- here we go again!

    So I made one of these before but it was a cheapie low budget foam job- now it's time to do it right. :) This build is a special project I'm doing for a friend. I didn't make the helmet- I'm just making it move. I will say that the helmet that was sent to me is one of the most gorgeous movie...
  22. andy19422

    Interest Stargate Tea light Braziers

    These Braziers can both be seen in Stargate SG1 and the square one is also seen in the first movie. They are about 8.5" and made from hollow resin and painted to look like the screen used Braziers. They are £25 each or £40 for the pair, you can also just have two the same to make the pair...
  23. S

    Autographing A Screen Used Item

    Hi Folks I'm gonna do Chevron 8.2 in London this April 24-26 David Blue [ Eli - from Stargate Universe ] is gonna be there so I'm gonna take one of his screen used "You Are Here" T-shirts -- I'm just wondering on whether if I get him to autograph both the T-shirt and VIP's COA, whether it will...
  24. Chronicle

    Limited Run Stargate™ Anubis Helmet

    Chronicle Collectibles is a licensee of the 1994 Stargate™ movie. This Anubis is molded from the screen-used helmet and is a true 1:1 scale model. The eyes have been wired to light up and the head of the helmet is pre-posed. This work of art is meant as a display piece and cannot be worn. This...
  25. andy19422

    Interest cheaper Stargate RA mask wall hanging only

    I have another interest thread up for my RA mask on a base http://www.therpf.com/f75/stargate-movie-ra-mask-spaceship-panel-base-now-lower-price-231350/?highlight=ra+mask but was wondering if there is any interest in just the mask. This mask has picture wire on the back so that it simply hangs...
Top