1. FuzzyDrawings

    (HELP) Modifying Resin Grail Tablet

    Hi all! I've purchased a Last Crusade Grail Tablet replica. The replica has a "hollow" back and is cast in urethane resin. I would like to finish the back so it is more of a complete piece. I'm not concerned about weight. Do you have any tips on how I should go about this, specifically if I...
  2. bummer6

    Interest interest! The Rocketeer (1991) cold cast bronze helmet UPDATE: not taking orders at the moment.

    Hello everyone! Since I successfully made the mold for my rocketeer helmet, I've started experimenting with cold casting and I've gotten to a point where I'm confident I can reliably produce cold cast helmets. I need to buy a new batch of resin plus metal powders and tints to start producing...
  3. crawjaw

    ALIEN VS PREDATOR Bas Relief Urethane Casts For Sale (Price reduced)

    I have a selection of casts made from my own oil clay sculpture and mould of Alien vs Predator and as far as I'm aware nobody else has done this so they are essentially unique. The sculpture is based on the iconic poster artwork from the first AVP movie. Each measures 480mm (18.9in) x 390mm...
  4. Seananigans

    Cast Resin Pulse Rifle Shroud

    New shroud designed and test printed ready for uv resin printing then on to mould making, this will be cast in a strong urethane resin along with the Thompson receiver, lower, bolt and grip.. The new shroud accepts a real spas12 heat shield and real or Airsoft Thompson along side my usual 3d...
  5. Wigley31

    Hellboy B.P.R.D.

    Just a few b.p.r.d. relics I've made from polymer clay
  6. SeaMoon

    Does anyone know any good local brands for Polyurethane / Polyester Resin in the Philippines? (or Asia)

    Just as the title says. I'm looking for any good (possibly budget) brands of resin aside from the well known Smooth On.
  7. Seananigans

    Aliens3 Pulse Rifle, resin 3d printed/pla+ custom.

    My custom Aliens3 tactical black counterless Pulse Rifle, a mix of one off 3d printed resin parts, converted metal Airsoft receiver/Spas12 Airsoft pump grip and PLA+ shroud and Spas cage etc.. I will be sanding , priming and painting it in the next few weeks.
  8. ArcSpectator

    My experimental DIY attempt on the John Hammond Cane Top(with Easter egg)

    So I heard a few people mention an alternative to the silicone molds often used for amber eggs, Easter eggs. I decided to try improvising my own version. Which involved drilling a hole on top of the Easter egg and putting a PVC pipe on it to make a mold for the stem of the amber egg(yeah that...
  9. Justin1

    Narin's Death Warrior

    Hey, everyone! It's been a long minute since I've been here, and it looks totally different now, but figured I'd share this here since I just finished it up, figured someone may be lurking that may enjoy seeing it. I know there are a lot of versions of this kit out there so I wanted to do...
  10. nightsnotover

    Master Shake (Aqua Teen Hunger Force) resin figure [WIP]

    Just ordered a 3D print of Master Shake, one of the most iconic Adult Swim characters of all time. I'm so excited to try out resin casting, and Shake should be pretty easy to mold given his simple shape! Do any of you guys have any experience making casts "hollow" to save on resin? Would...
  11. MortonPrice

    Predator Resin Model - How to Join together

    Hello all, looking for some advice on Resin models and how to join the limbs together. i have purchased 1:3 scale Predator 2 Kit which has come in pieces and i have no idea how to join it all together. The torso is really heavy. A solid piece of resin. 1) I have no idea how to join the legs to...
  12. DevilPool

    Resin Swords and Resin Two Tone Guns

    Greetings and salutations one and all. DevilPool here, and I joined this community only today honestly to seek out some information from people who might be able to answer me, as google lead me here and can't help worth a damn. My question is about resin weapons and UK law. Now I am from the...
  13. Alrightman

    Polyester Resin on EVA Foam Question

    Hello everyone! :) I have a couple questions. The thing is, I want my EVA foam helmets and props to be rigid, and durable. I generally coat them in a couple layers of Polyester fiberglass resin. This has worked out fine so far, after about ten helmets, the only real issue is the dripping and...
  14. P

    A few questions about urethane molds - clean up, prep & adhesive

    I just successfully pulled my first urethane mold off of the plug and I have a few questions. 1. I used Sharkthane FlexPro 60-20. The plug was 20lb foam painted with primer. Although I waxed the plug and sprayed it with PVA some of the primer still stuck to the urethane. What's the best way...
  15. PlanetAlexander

    Avoid Pooling when Slush Casting

    I've recently done a couple of cast of a Borderlands 3 Psycho mask, using slush casting. I'm using Smooth Cast 300 for the resin. Problem is when the resin really starts to set, it starts to pool and form in one spot, as I'm sure has happened to most people. You can see the ugly and uneven...
  16. 13thhr

    Rocketeer mini figure

    After my daughter (who is 5) watched the Rocketeer animated series that recently came out, she got interested in the original comic and movie. Although she’s a little young for both, she did enjoy seeing some clips of the 1991 film. I thought I’d start making a clay sculpt of the original...
  17. DylanRose

    Robocop OCP headquarters architectural model

    My contribution to this years RPF Secret Santa was a 3d-printed architectural model of the OCP headquarters from RoboCop! Research I am sorry to say I had never actually need the original RoboCop until recently. It was listed as one of my recipients interests so as part of my research process I...
  18. Q

    Casting detailed object questions

    I'm in the process of making a replica of the Zafiro Anejo bottle topper from Breaking Bad and Better Call Saul. I'm sculpting it out of Sculpey clay, and I planned to bake it, make a mold, cast it in resin and paint it copper, however I'm afraid it would be difficult to remove the topper from...
  19. Nm1cciola

    1/8 Scale Lamp Post

    To whomever sees this post I am just asking to see if anyone knows where I can purchase a 1/8 scale Victorian lamp post. I am working with and 1/8 scale kit and I know that a 1/6 scale would dwarf it, Anyone's advice is welcome. The G scale train lamp light I bought a few years ago is just too...
  20. DarthAvarice

    Sweet Tooth Twisted Metal costume (W.I.P)

    As the title says, This is my work in progress Sweet Tooth costume. So far I have the mask, the pants and a few belts. I plan on adding the pink dots to the pants, upgrading the straps on the mask from velcro/elastic to leather and buckles, and turning a bunch of belts and rings into a harness...
  21. J

    Unsure of next steps

    Good morning all. I am working on a Halo Mk V helmet. I started with a Pepakura file and am close to completing the assembly. This is my first time doing this sort of thing and I'm doing it as a gift so I want it to look good. I was thinking that I would cover the paper with 2mm craft foam...
  22. TheAtomicSoul

    Interest Giddyup Buttercup -- Lifesize Fallout Prop

    Two feet tall! Fully poseable -- 19 points of articulation! I've made a couple of these for others already and since I am going to make another (for myself) I figured I should see if anyone else is interested. Final product will be made of resin using slush cast and solid pour methods depending...
  23. T

    Hi! Require Resin Recommendations

    Hi All, first post ever - long time lurker. ;) Hoping you can help me - I am currently about to finish off a 2 year (Zeke the Organoid from Zoids) action figure project and have done a fair bit of research on the topic, but would prefer if someone out here could advise from personal...
  24. crawjaw

    Alien versus Predator 19 inch Plaque

    Just finished casting this in cold cast copper. Going to have other finishes including glow in the dark, metallic cobalt blue, unpainted white polyurethane and anything else I can think to use. It measures 19 inches x 16 inches x 2 inches.
  25. P

    Limited Run So you want to be Batman? I'll be your Alfred.

    Throughout many years of enjoying Batman, I've amassed quite the arsenal of Batman gadgets and props - and after 2 decades of collecting and perfecting, I'm now very happy to be opening the vault doors to you. If you're looking for a Batman gadget from Batman Forever or Batman & Robin, odds are...