model

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

  1. GCLAMBERT89

    ROTJ E-11 3d model for SLA printing

    I have been slowly working on my real life MGC E-11 prop, but I also wanted to have the ability to make an accurate 3d printed copy of the gun as well. Here is my attempt at crafting a 3d model of the ROTJ E-11 for the purpose of 3D printing in SLA. I carefully measured every facet of the...
  2. alexaldridge

    Xbox One Gaming Controller Exploded View

  3. Tanolucas

    1/12 3d printed Cloud Riders Skyblade 221 from Han Solo Movie

    While I finished painting the Enfys vehicle, I started to design the second Cloud Riders bike, to be honest, this is the one I like the most of the whole band, it is the Skyblade 221, for those who saw the movie, it is the one with the sidecar. It is just a little shorter than the Enfys bike...
  4. Enohado

    Ralph McQuarrie 1/24 Studio Scale 3D Printable Concept X-Wing

    Hello, I would like to share my McQuarrie concept X-Wing. I saw someone who designed one years ago but as it usually works, they were limited kits and long sold out/impossible to obtain, so figured why not make one. (Also I think the designer sold the files to EFX? Who in turn did nothing with...
  5. Harada357

    Planet of the Vampires 1965 Movie - Prop Rifle - Build

    I was looking for anyone who built a 'prop Replica of the "Planet of the Vampires" 1965 film - Prop Rifle. I was looking for the most accurate information - It is a ODD Ball piece - but I loved the film. It inspired the Alien film and many others. Very moody - SCI FI horror on a low budget -...
  6. darthvader073

    Zvezda/Revell ISD + 3D Printable Greeblies

    Hi everyone! After some two years of owning it, I finally managed to find time to tackle down this modelling project. One of the reasons is a planned home theater that I will make this summer, and it will need a couple of nice looking models to populate it :p My end goal is to make this Avenger...
  7. Justin1

    Narin's Death Warrior

    Hey, everyone! It's been a long minute since I've been here, and it looks totally different now, but figured I'd share this here since I just finished it up, figured someone may be lurking that may enjoy seeing it. I know there are a lot of versions of this kit out there so I wanted to do...
  8. madebyap

    AP's Studio Scale TIE Fighter (2020)

    Greetings prop and model makers! Last year I found a studio scale TIE fighter on eBay, as the story goes, it was sitting in the seller's garage for the past ten years and he never got to it. He says it was a Nice-N model that was miscast, so he got it really cheap. I posted pictures and video...
  9. Custard Gannet

    Blade Runner : Lobster Aerodyne

    So for my first scratch build I decided on the "Lobster" aerodyne from Blade Runner (although it could just as easily be called the "cobra car" from the stencils you can see on its "claw" wheel wells in some shots of the studio model. Its kind of mysterious, and relatively obscure (no toys or...
  10. D

    1/350 Thunderbird 1 and Launch Bay

    Hello all, during lockdown and now the summer holidays I've found a fair bit of time to get some model-making into my schedule, and I thought I'd start by finally building and painting this Aoshima 1/350 Thunderbird 1 and Launch Bay a couple of weeks ago. I've always loved practical effects (as...
  11. The Old Maker

    Architecture kitchen miniature/maquette/model (term 1 final project)

    Hey dudes this is my first term final project we had to create our own kitchen (from our house) but i thought this is a copy paste and i designed my own kitchen and created it some parts doesn't match (mostly the cupboard) to style of the kitchen and some parts are now cut well sorry for these 2...
  12. D

    Custom made Millennium Falcon

    Hey everyone. I want to make a Millenium Falcon from balsa wood and was wandering if anyone knows of any build plans for this? I’ve searched everywhere and can’t find anything. I’m tempted to get the Bandai 1/72 perfect grade kit but would rather build it all myself from scratch. Any help will...
  13. DylanRose

    Robocop OCP headquarters architectural model

    My contribution to this years RPF Secret Santa was a 3d-printed architectural model of the OCP headquarters from RoboCop! Research I am sorry to say I had never actually need the original RoboCop until recently. It was listed as one of my recipients interests so as part of my research process I...
  14. JTurchetta

    Completed Eaglemoss 1:8 Scale DeLorean Time Machine

    Hi everyone! Here is a look at my 1:8 scale Eaglemoss DeLorean. I was lucky enough work on the restoration team of the original A-Car, so I modeled this one after that car. I also was lucky enough to shoot the reveal trailer for that car back when it was completed, so I have riffed on my own...
  15. E

    Random Greeblie pack

    Hey guys! Sorry if this is in the wrong place or whatever but I have a question for you guys. I know these have been spoken about on here before but are there any people selling Greeblie packs? I'm looking for a random assortment of pieces. Likely they would be 3D printed (I'd do it myself...
  16. COlson

    Makita (from "The Red Star")

    I am very pleased and excited to get to finally reveal this commission paint job I did on this fantastic sculpt of Makita, from the graphic novel "The Red Star", by Christian Gossett. The sculptor of this figure is unknown and only 2 of these figures were ever produced. I feel very privileged...
  17. simon830

    Jurassic Park Gate Model

    Been working on a thing. Always wanted a Jurassic park gate since I first saw the film but never found one within my price range. So I made one myself. I 3d designed it fully myself in blender which took a few days to get all the references and such and try and get a good size. So i went with...
  18. simon830

    Jurassic Gates

    Been working on a thing. Always wanted a Jurassic park gate since I first saw the film but never found one within my price range. So I made one myself. I 3d designed it fully myself in blender which took a few days to get all the references and such and try and get a good size. So i went with...
  19. tmax

    Interest 1:6 Scale Snowspeeder Kit

    Hey all. Looking at the possibility of producing a 1:6 scale Snowspeeder 3D printed kit, for all you Hot Toys and Sideshow fans. The goal would be to make an accurate replica with opening canopy. We may also look at offering electronic kits to light up the cockpit, if the interest is there...
  20. COlson

    DeAgostini Millennium Falcon

    Here are some photos of my DeAgostini Millennium Falcon model build. I built this a few years ago now. I was an early adopter of the kit. The additional interior hold detail is all custom built from styrene and tubing. The floors of the hold and halls are photo etch, as well as the engine...
  21. ModelJedi

    Arrival Spacecraft model

    Hi everyone! Long time reader first time poster so I hope I'm doing this right. I want to scratch build a scale model of the ship (spaceship, starcraft, transdimensional conveyance) from the 2016 movie Arrival. Does anyone know where I can find some specs, dimensions, or drawings? I would...
  22. COlson

    Bandai X-Wing 1/48 scale Heavily modded

    This is my Bandai 1/48 scale X-Wing starfighter. I have heavily modified this kit with additional electronics and a custom base. The torpedo firing and and wing functions are all that were kept from the original kit. I added full cockpit lighting with targeting computer lighting, engine...
  23. TheCopperhead

    Stop Motion Sets (O'Brien/Harryhausen Style)

    Hi! I posted a few months ago on my stop motion dinosaur tests and thought I'd post a link to my blog and a couple of videos on what I have been up to lately. Angus Lamont - Stop Motion Animation/Model-Making :)
  24. S

    Interested in building the jenny haniver from Mortal Engines

    Hello all, I have recently seen the trailer and short model making video from Mortal Engines and was taken in by the Red airship called the "jenny haniver". I would love to build a model of it but there are so few photos. I might have to wait for more info and screen captures to become...
  25. taibhse

    Detective Pikachu - Where Could I find fur for a replica?

    So I'm considering making a replica of Detective Pikachu from the upcoming movie, but I'm wondering where I could get fur that would suit and how to dye and colour it and trim to match his appearance over a solid form.

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

Top