Hi Iam thinking about making a green goblin costume for Halloween and found this latex mask on Amazon I was thinking of using as a base, only problem is I have never worked with latex before and I have no idea how to paint it
Hello All,
With quarantine going on I decided to get started on a Knull/Necrosword build, for the base chest/back I used the "Adonis" pattern from Kamui cosplay then tweaked it to my liking. Everything else was done by drawing onto different size Eva Foam from Michaels. The same goes for the...
Selling off most of my Marvel collection, so this is next in line. Baby Groot figure that I have had for a few years stands 6" tall by around 4" wide
Asking $90 shipped (in US)
'' DON'T PUSH THAT BUTTON!!! '' :)
Hello people,
This is Rocket bomb detonator from Guardians of the galaxy vol.2 used by baby Groot.
It's a full metal build prop replica with no electronic.
It's only a static prop. It weights roughly 1kg (yeah!) and is about 6 inches long.
Since there...
so i dip in and out all the time but this is my first post
so lets start with a bang im looking to start making the vulcher wings back pack and exo legs
so ideas time
wing span of 7m total
each wing at about 3.5 m
feather to first hinge point 140cm
first hinge to secend hinge 2.10cm...
Well here it is, the beginning of 2020 and I had done a little work on transforming 1.05 Iron Man MkVII Helmet by Darkside501st pepakura from a paper item:
to a printable 3D Item.
Need to separate parts out so that I can get my fat head in and out easily
OK, so let's get a rundown...
Just a sneak peek of the flight stabilizer boots from Ironman 1. This is V2 of my previous build.
This is completely flexible!!! Can’t wait to share how fluid this thing moves as well as capabilities.
Hey, all.
I'm looking at what it will take to recreate the Red Guardian costume seen in the recent Black Widow trailer. The fabric looks to have a very tight hexagon texture to it. Anyone have a thought on where it came from , or something similar?
Thanks.
Hello, all!
This weekend I was finally able to debut my newest cosplay that I've been dying to do for the past 5 years! It's loosely based off of a version of Captain America from the 2015 Secret Wars series...
I started with the shield roughly 4 years ago, and it was sitting in a closet...
So guys this is just a proof of concept. So bear with me lol
If you’ve seen my previous posts, you know I’ve been working on a Mk 43 suit. I’m building it using 3d printed parts, but mostly I’m using aluminum for the frame.
What you see here is just a proof of concept, in regards to an eject...
Hey guys, I'm very new to cosplay. Never touched a chunk of EVA foam in my life. So I thought the best cosplay to ease me into the hobby was a super complex suit of armour made out of foam. I am a smart person who makes good decisions XD.
It's not too bad though. Someone else already did a...
Welp, I guess since I'm here I may as well make a thread on this.
Like a majority of the human population, I am a HUGE fan of Spider-Man. I am also a big fan of cosplay, as well. So, like any big Spider-Man fan, I am planning on making a Spider-Man suit myself. Now, this won't be the first time...
What’s up guys, I’m back, I’m making my second 7 piece spidey suit. Let’s get right into it.
So the base suit was purchased from ZentaiZone. It used their red and deep blue fabrics.
The first thing I did was attach some snaps around the waist. I got these snaps from Walmart. I ended up using 5...
Hi all, I’m currently trying to get a Thor cosplay off the ground and am wondering if anyone has any suggestions on how to make the glowing disks. My first thoughts were LED strips under clear disks that are painted black to give it the crackling effect.
HOWEVER... I have literally no...
Hey all!
I spent quite a while trying to find a screen-accurate Star-Lord blaster 3d model, but I wasn't 100% satisfied with the models I was finding (both free and paid), so I decided to learn 3D modelling to get as many details as I could, and after a good few months learning, I'm pretty happy...
Hello everyone. After a long time studying and seeing all the great creations on this site, I'm planning out a couple of my own. The first being an undersuit that resembles the RDJ Ironman 3 under armor. Some combination of the two photos I've attached. Was thinking of getting a similar looking...
Howdy! This is my first thread so I can't tell if I'm doing everything correctly, so if I did them please tell me. This is also my first 3D modeling project, for which I did on 3D builder (yeah, I know lol), so any tips for that as well would be much appreciated! Anyways, I've made some very...
Hello, need help to identify the rivets that are on the EFX captain america shield. One is missing, it is the one on the hinge that holds the straps together on the upper side of the strap where you are suppose to put your hand. And i imagine it is like identifying a screw which is a bit of a...
Just saw FFH and love the case that the EDITH glasses came in. It looks to be root-ball wood but I can't find it anywhere. Anyone have any ideas who makes this/how it could be made?
Hi folks,
So below are some fan activities that I am helping to organize for Marvel, DC Costumers and for other prop enthusiasts. Please check out the following:
Marvel fan shoot hosted by the Avengers Initiative: 2019 San Diego Comic-Con International Marvel Fan Shoot
DC Cosplayer Photoshoot...
Can someone help me figure out who's pattern this is? I bought this suit off ebay and I want to get a new mask with no eye holes so I can cut my own and not have the fabric peeking out the rims of my faceshell lenses. Thanks in advance!
I’m looking to do a fem! Loki cosplay from The Avengers movie and I was wondering if anyone knew where I could find a proper tutorial to make the shackles because the one I wanted wouldn’t make it in time for the con I’m going to (Otakon 2019). Any and all help would be appreciated! Thanks guys!
So me and my team are now constructing this newest Iron Man full suit commission straight the recent Avengers: Endgame movie. Will be posting progress here.
I know this costume has been done on this forum before, notably in this thread by joshspiderman23.
That was seven years ago and with the recent Into the Spiderverse and the Far From Home films I thought it might be time to revisit it. I also intend to do a Spider-Gwen Noir costume as well, but...
Got one of those metal eBay shields from China and honestly they're pretty nice for the price! They're not flawless by any means though. Below are some things about them that could be improved:
- diameter (mine is around 22", although they do have an updated version now that's around the screen...