lord of the rings

  1. verdaera

    Tauriel Build (The Hobbit: Desolation of Smaug) *PIC HEAVY*

    I know a lot of people don't like this character, but I love the design of her. Wood elves have always been my favorite and even though I know I'm not Elf Material, I love the look of this costume. I am making her green suede jacket version: I had a hard time figuring out how I would go about...
  2. scarf man

    Brendan's Magical Mystery Tour (2016), old timers must see!

    Hey RPF Brothers & Sisters! I've been kind of a ghost here for a number of years, & I'm no longer comfortable with that. I'm embarking on a solo road trip from my home in rural Wisconsin, to Santa Cruz ,CA to visit uncles. I'd like to finally meet some of you dear internet buddies in the...
  3. D

    Britishfest Convention June 3rd-5th Omaha Nebraska

    Britishfest.com Convention in the USA!!!
  4. Grimstone

    Goblin King Bust from The Hobbit

    My life size Goblin King as inspired by The Hobbit. Epoxy clay over foam, acrylic paint, synthetic and animal hair, handmade 65mm eyes.
  5. P

    The Hobbit - Dain Ironfoot Helmet

    I did a project on this helmet awhile back. Then recently picked up a 3d printer and thought it would be a good first full scale print to try out. Took way longer than I thought to get it prepped for printing but learned a lot from the process. Still sorting out what sanding and soothing...
  6. A

    Lord of the Rings - Witch King Gauntlet Templates

    After seeing how hard it was to find a template for the Nazgul gauntlets, I decided to finally do something about it. However, I did find one online that I believed to be pretty good. So I do not take credit for this template whatsoever. I found it somewhere on instructables if I remember...
  7. Mark Roman

    Want to Buy Ringwraith armor templates

    I'm looking for some PDF templates for the armor parts worn by the Ringwraiths from The Lord of The Rings, primarily the gauntlets. ill be transferring them to sheet metal and hand making them.
  8. Kipster12345

    Want to Buy Halloween Costume! (Preferably Star Wars)

    Hey everyone since I did not have enough time and money to finish my Clone Trooper before Halloween I am going to need a new costume that is not expensive, and does not take long to make (if crafting is required) . I am open to all suggestions I would love a Star Wars costume, but I would not...
  9. Zalkegeroth

    The Fountain Guard, Lord of the RIngs: Return of the king (Completed) (Photo Heavy)

    My first thread here, but I am going to be making the Fountain Guard from The Return of the King. Although they only get about a minute max of screen time, they are very iconic and I fell in love with their outfit right away. For those of you who may not know, this is what I am building. I...
  10. G

    Topographical Middle Earth map

    I'm not sure if this is the correct section to post this in as it isn't really a prop per se. However, I think since it is a map and those tend to be props it is the way to go. So for the last 3 days I have been modeling hot and heavy. I've managed to get together a fairly detailed topographical...
  11. abn

    Legolas from The Lord of the Rings Prop & Costume Build (image intensive)

    Hello RPF folks ^-^v I've been a lurker for a few months now, and this is my first time posting a project here.I've been working on the costume of Legolas from The Lord of the Rings since early this year, specifically the version out of Lothlórien. I've finished a fair deal of the entire get-up...
  12. KKprops

    Witch King mask, TEMPLATES! Lord of the Rings

    Hi! I just started making a Witch King mask :D I made tamplatets and I want share them with you ;) They are sized for a4 printer, the only thing You need is a 3,5 width strap wich you need to measure to your head. I'm making it out of foam, worbla and some body filler for details. You could do...
  13. Serenity

    Want to Buy Japanese Ring of Barahir (Lord of the Rings)

    I am looking for a very specific version of the Ring of Barahir... The one seen here: (Photos via springlering) I believe this is the same one or close to it: (Photo via NazgulKing) It appears to have been issued in Japan during the release of ROTK. If you have one or any leads on one...
  14. Terry Lyons

    Lord of the Rings - Boromir's Bracers

    I’ve always been a big fan of Lord of the Rings, and really appreciate the design and craftsmanship on display throughout the movies. One of my motivations for learning leather craft was being able to make pieces using authentic materials, and Boromir’s Bracers were perfect as a first major...
  15. coregeek

    Tauriel Daggers from The Hobbit

    I recently completed a scratch build of Tauriel's Daggers from The Hobbit films. Thought I'd share the complete build process. This is a comprehensive build covering the prop master build, molding/casting, and final finishing. I have 50+ photos so I'll post in sections. I started with a piece...
  16. C

    MY FIRST PROJECT : Eomer from Lord of the Rings

    Hi everyone ! So, I'm new here and as I'm starting a big project I decided to start posting here! Until now, I've only made a few stuff out of foam just for fun. It's really non professional cosplay and very cheap but I really liked making those stuff. Two years ago I made foam armor such as...
  17. The Full Armor

    Service Now Taking Commissions: The Full Armor's Costume Build "Wish List"

    Hey guys! This is a thread where I am advertising my services to make replica costumes for anyone who's interested. With my business (making custom props and costumes for a living), I spend a lot of time doing research for my potential customers when they wish to have a custom costume built...
  18. Timparty

    My Lord of the Rings prop collection

    Hey guys this is my LOTR collection of props which i have accumulated over the past couple years. Hope you guys appreciate it more than my facebook friends! My most recent build: Witch king of Angmar helmet, 3D printed in PLA. The Witch King's flail. Built this a long time ago from mdf and...
  19. Johnnyfl

    Want to Buy Legolas Quiver

    Hi, I am interested in finding a good quality screen accurate Legolas Peacock or Mirkwood quiver, straps and preferably some screen accurate arrows. Any out there?
  20. LokiFenris

    Ogre Bust WIP

    I've been working on an Ogre bust for someone for a while inbetween running my business teaching SFX to adults and kids. The person the bust was for gave me a rough sketch with an idea as to what they would like for the Ogre. Currently it is still in the sculpting stage with the back of the...
  21. SKS Props

    Orc WarLord Helmet SKS Props Pic Heavy Updated 5/27/2015

    Hey everyone I have decided to start a new build thread based on my own design for a change. This time I will be making something I have always wanted to build, a big bad ass orc warlord helmet. Many of my builds are based on game designs and by getting to do my own I get the freedom to play...
  22. M

    The Hobbit: Legolas

    I was just wondering if anybody had bought the Legolas bracers from Weta? Failing that if anyone has an image of the embossed design laid out flat I would be greatly appreciative as I'm hoping to make my own pair, I'm sure I've seent he design on a plaque relating to Legolas but I'm struggling...
  23. SciFiPropFreak

    1:1 gigantic, animatronic Mirkwood Spider

    Some of you creature fans might like this... Last weekend was HobbitCon3 in Bonn, Germany. As a colaborative project from multiple groups, we realized a Lord of the Rings/Hobbit themes Haunted House attraction. This was one of my creations for this project (mostly I was responsible for...
  24. M

    eowyn's refugee dress

    im planning on making eowyn's dress from two towers. the refugee dress is the simple blue dress with a brown jumper over it. what pattern would i use to make it and where could i find the fabric to make the under dress. thank you.
  25. M

    Want to Buy moria orc shield and sword or battle axe

    Hi there, im looking for a moria orc shield and sword or battle axe. Will need it posting to the united kingdom. Any help would be appreciated. Thanks
Top