Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.

  1. R

    Want to Buy Fallout Wand Company Pip-Boy Screen Upgrade Module

    Searching for the screen upgrade module for the Fallout Pip-Boy Construction Kit made by the Wand Company.
  2. BeardySi

    Blade Runner PKD blaster / That Gun

    This came as a nice surprise birthday present from my wife. She knew Blade Runner is a favourite of mine, but she'd no idea that this gun also appears in Fallout which is a big obsession of mine. The kit came from etsy and a bit of research reveals it to be a recast of the Doppelganger...
  3. F

    Pip-Boy 2000 "Mk. I" from Fallout 1 / Fallout 2

    Ok, it's time to get this build going. I've been dragging my feet long enough, and I figured if I posted a WIP thread in here, that'll force me to actually finish the bloody thing! :D So, I'm planning on building the original Pip-Boy, as seen in Fallout 1, Fallout 2 and Fallout Tactics. There's...
  4. DFC Props

    Pip-Boy 2000 MK VI Kit Build (Need Help!)

    Hello all. Hope everyone is doing well. I'm finally getting around to finishing up my Pip-Boy kit that I purchased last year, but I need some help. I intend to install a real screen with an animated video to simulate a functional screen (not a phone), lights for the vacuum tubes, and a...
  5. D

    Fallout 76 Veteran ranger armor

    There are plenty of these going around i'm sure so here's my crack at the vet's. I'm trying to do the Fallout 76 design which adds a few details which are the seams on the model and on the helmet. Since I lack the resources to do a 3D print I'm going to try and go back into scratch build with...
  6. Light Leather Armor

    Light Leather Armor

    My early-campaign Sole Survivor. The leather armor is the studded variety, which features carriage bolts and wingnuts of various size, with a hand-stitched fringe using waxed thread. Weathering was done using sandpaper and some engine grease from a '95 Nissan Pathfinder.
  7. Yellow Flight Helmet

    Yellow Flight Helmet

    My early-campaign Sole Survivor, in the flesh. The yellow flight helmet was constructed from an old motorcycle helmet with assorted bits of thrift-store junk bolted on; the rest is hand-worked leather and thrift clothing.
  8. TheAtomicSoul

    Interest Giddyup Buttercup -- Lifesize Fallout Prop

    Two feet tall! Fully poseable -- 19 points of articulation! I've made a couple of these for others already and since I am going to make another (for myself) I figured I should see if anyone else is interested. Final product will be made of resin using slush cast and solid pour methods depending...
  9. TheAtomicSoul

    Fallout Stimpak and FO76 Silo Code Launch Piece

    Since the first image I saw a picture I wanted to make one. So I did! I made one for my nephew, and another for an order, and now I finally get to make one for myself!
  10. Alerathy

    NCR Desert Ranger

    Hi all, just started getting into cosplay and I have finally completed my first build which happens to be the NCR Desert Ranger variant. I wanted to switch up the trend a bit because I had seen a ton of the regular NCR Veteran Ranger but nothing really in the way of the desert variant. There is...
  11. Scapey

    Fallout 4 Fatman

    I figure it's about time I got over my anxiety and posted some pics of my work on here! LOL Being as I've been here for yeeeeeeears and all... So I was asked last year to make some props for a Fallout-themed pop-up bar that was opening in Edinburgh. The owners had seen the laser pistols I...
  12. samsalvo64

    NCR Ranger Armor Build

    I recently got myself a 3d printer, and the first thing I wanted to make was something from fallout. I decided on the NCR Ranger helmet from Fallout: New Vegas. I've made some progress, but being 3d printed, it will take quite a bit of time. Here's what I've done so far. I've knocked out the...
  13. CallsignFallout

    T-45 power armor build!

    So recently I asked about t-45 shoulders and I came up with my own foam ones after about 3 days. This thread will be my build progress on the armor. So far I have completed building the fore arms and I’m working on the belt, boots, and finishing up the shoulders. I will try and get some pictures...
  14. MymlanOhlin

    Prop maker introduction

    Hello all! I'm an amateur prop master in training, specializing in graphic recreations of printed props. My content is quite all over the place, with some of my more notable projects being Nuka Cola custom bottles from video game franchise Fallout, sculpted Skeleton Bottles (2nd place winner...
  15. CallsignFallout

    T-45 shoulders?

    I’m still new around here, I don’t know if this is exactly the right place to be posting this but here it is. I have been wanting to make some t-45 power armor. I see people asking about the T-45 power armor files but I found them on paper craft square. However, I have a problem. On the file...
  16. Craftynathan

    Nuka Cola Recipe Book

    Does anyone have a PDF Copy from Fallout 4 Nuka World ?
  17. Craftynathan

    {Completed} Fallout 4 (Pre-War) NukaCola NukaWorld Security Guard

    Hey there, This is my first big build project and i thought it would be fun to share it. I have played the fallout games relentlessly and loved every moment of them and always wanted to make a top notch build. Originally i was looking at the Brotherhood of Steel and the orange jumpsuits the...
  18. N

    Pip boy 2000

    Pipboy 2000. I decided to do it for a long time, but it turned out to finish just now. Thanks for the model to the very talented guys from the Molten Clouds team working on The Way of Chosen project - Fallout 2 on the engine of Fallout New Vegas (https://vk.com/moltenclouds). And let them...
  19. M

    Issues with preparing .obj files ripped from games for printing (using Blender)

    Hey there, guys. I'm having an issue with preparing .obj files I ripped from the Fallout. I have no idea what I'm doing, and am following some tutorials online. So here's the issue: I took this model I ripped from NV, and I applied the subdivision surfaces modifier- and the edges are...
  20. CutTrasformGlue

    My Fallout 4 Replicas and Props - Holotape added

    Hi everybody. Recently I started making replicas/props, and decided to film the whole process of the making and put that into a Youtube channel. I had some experience making my own kitbash scale models, but I had no experience making someone else's design. Hope you guys like it. Once I release...
  21. Postapocalympic

    Spirit Halloween Fallout 4 Thirst Zapper!

    I stumbled across this gem as I was doing some pre costume scouting for my kids. Only $20 and it makes sound. I gave it a quick wash with some black and some silver edge wear. Nothing too involved, didnt even sand it. Just a little dirter, and make some of the details stand out a bit more.
  22. Gundamsam

    Fallout Nuka Cola Caps Fallout 76 / Fallout 4

    Hi all, First proper post here so be gentle! So i've been making a few things here and there, but just for a bit of fun i've been trying to make some realistic looking rusty Nuka Cola caps. I work as a sign maker by trade and have access to some pretty awesome stuff to play with and have free...
  23. sschueller

    Mission: Impossible - Fallout (2018) - Nuke remote trigger device

    Hi everyone, My first post :). I want to build the beautiful trigger device they had in the movie and I am looking for some input regarding parts if anyone has any suggestions on sources. I think I will make it into an egg timer or maybe an alarm clock. Has anyone else already started a...
  24. D

    Waterproof Prop Question

    Hi everyone, sorry if this is the wrong forum but i'm looking for something specific. Does anyone know of a props company who could make a waterproof deathclaw head (it will be permanently submerged, hence needs to be waterproof), I imagine it would need to be made of some sort of silicone, but...
  25. C

    Fallout T-51 Power Armor Costume Build Log

    Hello one, and all! I am the Crusader and I am preparing to embark on my first costume that I've ever made! A little bit of context, I've been making custom computer cases for 5~ish years now and really want to try my hand at costume design, especially after seeing all the possibilities for...

Don't want to see this ad? Sign up for anRPF Premium Membershiptoday. Support the community. Stop the ads.