cosplay help


    DRDINGBOBBLE's semi-budget Darth Vader build

    I started on a Darth Vader build a couple of weeks ago on a "smaller" budget for a typical Darth Vader cosplay. However, I do have some questions about the process
  2. Macoro

    Delete thread

    ¡Hola! ¿Alguien por casualidad hizo un patrón de Spiderman sin llegar a casa? (traje final) o tiene el archivo gunhead por favor? Yo realmente lo apreciaría
  3. M

    Need help with space marine cosplay

    Hello all, I am mono an aspiring cosplayer and warhammer 40k i am making a space marine cosplay and i need help, i do not know how to rig the lower portion as well as the arm portion to myself so it wont fall, i am making the suit height accurate and out of foam and any help would be greatly...
  4. Bhc0322

    Spider-Man Cosplay help

    Hello, I’m needing some help with a Spider-Man cosplay idea. I’m wanting to do a home made suit but aside from puffy paint, what would be my best option for having textured webbing? The ideas I’m thinking of are screen printing but honestly I’m not sure how well I would be able to do that since...
  5. Jacob Center

    Any suggestions on textured fabric for Spider-Man suit?

    So I'm planning on making the new version of the Advanced suit from Spider-Man 2, and was wondering if anyone knows some good distributers of screen printed fabric with this small dotted texture. I already know about the clear dot spandex from spandex world, but the dots are a bit too big for my...
  6. Stradaro

    Looking for help with my first cosplay

    As my first cosplay, I want to perform Kongming from Ya Boy Kongming. I found a few sites that sell the costume (like go2cosplay and this much cheaper one on skycostume). The first noting that the costume is made of "Uniform cloth", which I've heard is basically the cheapest of the cheap and the...
  7. CosMania

    Wreck it Ralph Calhoun struggles

    Hey, anybody on here know how to make a convincing seam with heat moldable cosplay foam? I’m looking to make Calhoun’s suit from Wreck-it Ralph, but I don’t know where to start. Thanks!
  8. jvear12190

    SpiderMan Upgraded Replica suit

    Hello everyone, I am new to this so I hope you guys may find this thread or post interesting, maybe even helpful, or inspire you to make your own suit. I was hesitant to star one of these because I wasn’t sure if my work but now on starting on my second attempt I figured I could take the time to...
  9. Harryfrei4443

    Need tips for mounting Batman Returns armor

    Hey everyone, New to the RPF so apologies if someone points out that this has been answered somewhere else. I have a full set of Batman Returns armor coming in sometime within the next couple of weeks and I can use a little help mounting it to an undersuit. I'm pretty handy when it comes to...
  10. M

    Spider-Man No Way Home Final Suit

    Hey Everyone I am the absolute most new born baby when it comes to cosplaying and suit making, I have done so much research but am still a little lost, I am trying to make my own spiderman suit I got a pattern but do not know how to size it and im not sure what to do when it comes to fabric on...
  11. R

    Spider-Man Ps4 Advanced Suit Urethane Emblems

    Hi all, So ever since I've seen no way home, I've been itching to do another Spider-Man Cosplay and I really want to do the Advanced Suit from Spider-Man Ps4! I've been looking online and haven't been able to find someone that sells Urethane Emblems for the advanced suit. If anyone knows or...
  12. joshthememelord

    Where do I find Fierfek's old pep files?

    Title says it all, their pepakura file development page got deleted, and I want to make some stortmtrooper armor using their templates, but a while back I lost the files due to me changing PCs. Even somebody sending the files (8.5x11) would be greatly appreciated. Thanks in advance
  13. Crescentmage

    Issue with Vacuuforming. NEED HELP!

    I'm trying to vacuuform some lenses for a Madness Combat mask I'm working on. The bucks are resin printed, and originally the thermoplastic would pick up the print lines when I'd do pulls, so I decided to sand out the print lines on the bucks to a glasslike finish. Upon attempting to vacuuform...
  14. Peter Parke 67

    Need help making a tasm 2 suit replica

    Hi, I am making my very first cosplay so I don't really have any experience at this point. I chose the amazing spider-man 2 suit to make a perfect replica of but I don't know where to start. I've seen a lot of people on the internet attempting to do so but even tho they love it, the suit is...
  15. D

    Looking for a Commission on Stormtrooper Armor

    Hello everyone, I have purchased a ANH stormtrooper kit from TrooperBay and I'm looking for someone to commission to put it together for me. Preferably someone in Texas, but I'll consider anyone. Thank you for your time! Sincerely, Dreynos
  16. S

    Invincible Cosplay Pattern Files

    I just made an account on the RPF to upload my custom Invincible cosplay files and some resources I've found to put it all together. I wasn't able to find any patterns that I liked (and I didn't really want to spend more money than I already did on the fabric), so I made my own. I decided to...
  17. SeaMoon

    Any recommended primer paints for foam besides Plasti-Dip here in the Philippines / Asia?

    I'm looking for a good cheaper alternative to Plasti-Dip spray paint as its quite pricey here going around ₱1000 ($20). I know Bosny made a similar spray can called Elastic dip but I haven't found anyone who has used it on foam. I'm thinking of trying out acrylic gloss emulsion which Gelo...
  18. yyalp

    Classic/Modern Spider-Man Cosplay (HELP PLS!!)

    This is my first post on the forum since I FINALLY decided to create an account after almost a year of reading posts without having one.. anyway. I'm working on my first cosplay and decided that the Webhead would be a great choice. The style I chose is something more inspired by Bagley's work...
  19. Patronic27


    Hey everyone! I'm a major Spider-Man fan and cosplayer like many of you out there and was considering buying this already made Spider-Man suit from a seller on Instagram. This suit has no webbing or logos printed or painted onto it which is perfect for me as I have always wanted to make a suit...
  20. Fritzy525

    First time cosplaying

    Hello cosplayers! I've been thinking about attending comic-con for the first time but I don't know anything about conventions, or cosplay. I mean, I've always loved the idea of going to one, but I've never been to one myself. If you guys could just let me know what I should do when cosplaying...
  21. TeeVee

    Painting on a Latex Mask

    HI! I'm doing a Technoblade cosplay, and I decided to alter an Inosuke mask for it. Only problem is that the original mask is grey, and I need a pink one. It's a latex mask, so I don't really know what would work. I would just do trial and error, but I don't want to mess up the mask since I have...
  22. Niccolo T

    Any suggestion on how to make Volrath's armor?

    Hi everyone, this is my first post on this forum, I would like to make the cosplay of the character Volrath (images below), from magic the gathering. I am new to costume making and I'd like your opinion on how I should approach the making of his armor. Does anybody have a suggestion on what...
  23. A

    I need help choosing a new cosplay.

    Ive been doing cosplay for a few years, and ive been running out of ideas. I got anime nyc 2020 this year and idk what to do and NEW YORK COMIC CON MIGHT HAPPEN And I definitely need ideas :eek: For reference I usually do cosplay with my body type as im very skinny and tall. So im just trying...
  24. Wraith's Heirloom Knife Apex Legends (blender tutorial).

    Wraith's Heirloom Knife Apex Legends (blender tutorial).

    In today's video we are going to make #wraithsknife in #blender 2.82 #apexlegends the process is quite simple and easy to make. the model is made in blender ...
  25. Djfirstclass

    Need help ID'ing toolbelt from Bumblebee 2018 movie!

    Hey everyone! I am trying to identify the type of tool belt worn by the character Charlie Watson (played by Hailee Steinfeld) toward the end of the 2018 film Bumblebee... does anyone have any info that might help?