3d printing

  1. RoboForceGo

    ED-209 1/12 Scratch Build WIP

    Hello! I wanted to share a project that I've been working on for about a year now. ED-209 is one of my all time favorite robot designs, but I've always been disappointed with the kits that have been available on the market. Last summer I picked up ZBrush for the purpose of sculpting my own...
  2. A

    Need help picking printer for weapon props

    i am planning on buying a 3d printer to make replica guns and movie props etc for cosplayers, i am torn between two printers, the Ender 3 Pro or the CR10s Pro, i have never used a 3d printer before, i have seen the CR10s Pro have a lot of negative feedback and i know the Ender 3 Pro is highly...
  3. Laserschwert

    Interest Jumanji Board (3D-printable)

    I am trying to gauge interest in the 3D-printable Jumanji board that I am working on right now. Some people have already expressed interest in my thread about the board, but I'd like to get a better impression. (3D rendering of an earlier version of my board, which I have improved upon a LOT)...
  4. Akilo101

    Best material for Iron Man Helmet

    Hey all, I am looking to try my hand at creating another Iron Man helmet, but want to make it as realistic as possible. The main methods I am looking at are -3D printing -Pepakura I also plan to make a mold and then cast the final helmet before I start to add electronics and such If you have...
  5. Nm1cciola

    BATMAN DIOARAMA 3D STL files modeling help

    I don't know if this is the right place to post this but, I've recently purchased these STL. files for LINK. I've looked for a long time a 1/8 scale kit or near 1/8 scale kit diorama piece for my 1/8 scale batman horizon kits and I believe I found it in this 3D print. I've never delved into the...
  6. krispikarim

    Space X Dragon Helmet 3D Model and Build

    Thought I'd share progress on this 3d model of the new version of the Space X helmet I have been slowly working on for the last few weeks. This is actually my second attempt at this helmet, but we aren't gonna talk about the first one...(it was real bad) My plan is to create a bust of this...
  7. samsalvo64

    NCR Ranger Armor Build

    I recently got myself a 3d printer, and the first thing I wanted to make was something from fallout. I decided on the NCR Ranger helmet from Fallout: New Vegas. I've made some progress, but being 3d printed, it will take quite a bit of time. Here's what I've done so far. I've knocked out the...
  8. JonnieLP

    3D Modeling props

    Hey guys, I could need some help from you guys. As I'm not too gifted when it comes to 3d modelling stuff, I wanted to ask if someone would be willing to help me out on this subject. My goal is to do a STAR WARS Fan Film around summer 2019 and I want to create some props and thought 3d printing...
  9. VariablePenguin

    The Golden Gun from James Bond 3D Printed

    This is a 3D printed replica of the Golden Gun from The Man with the Golden Gun starring Roger Moore and Sir Christopher Lee. I modeled it in Fusion 360, printed on my QidiTech X-One in PLA, sanded and painted with rattle can Rusoleum Bright Gold. Then I mounted it in a shadowbox to give to my...
  10. ZombieDUG

    Animatronic Madame Leota Tombstone

    Hey everyone! I wanted to start a new build log to share with you my wife and I’s latest project, the animatronic Madame Leota Tombstone from the Haunted Mansion que at Disney World! This prop is fully sculpted by us in Zbrush and then 3D printed. The animatronics are custom made by myself and...
  11. 0

    Calling all Blade Runner Blaster Fans... (lots of pics)

    Hi guys, I've only posted a few times on here and have been getting into 1:1 movie props. I bought the holy grail: a blade runner blaster but kept it quiet because it was 3D printed and I thought nobody would want to hear about it here as it was a "lower class" compared to a Tomenosuke. The...
  12. M

    Resin 3d print service request

    Hello! I have two small parts I'd like to get printed in qty of approximately 43 of each. One of them needs to be in a translucent deep orange. The other in a translucent dark blue. I have the stl's of the files and of course can provide them/pictures etc to assist with quoting and feasibility...
  13. M

    Looking for a service to 3d print my parts (resin prints only)

    Hello! I have two small parts I'd like to get printed in qty of approximately 43 of each. One of them needs to be in a translucent deep orange. The other in a translucent dark blue. I have the stl's of the files and of course can provide them/pictures etc to assist with quoting and feasibility...
  14. Sni9er

    One Part Molds minor improvement with 3D Printing

    Hey Folks!, maybe this has been tried before maybe it hasnt, but I tried out a new idea this week to use 3D printing to construct the mold wall to minimise silicone waste and also add markings to the silicone mold so you can see how much resin you need in the mold (as every time I write in...
  15. smilerbaker

    Iron Patriot Build - 3d Print

    So having a mk3 war machine under my belt I decided a new project was in order :) something a bit more colourful as the last 2 big builds I've done have been grey, so I've gone for do3d's iron patriot. Initial impression - Do3d's files are pretty detailed, as part of the package you also get...
Top