Recent content by SKS Props

  1. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/21/2018 This was the first time I got to try everything on and see how it all fit together. It is important to assess the look of the entire costume as a whole before you start to paint and weather.
  2. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/21/2018 Because I am building a half robot human hybrid, I couldn't just have a normal voice :) So I purchased a cheap voice changer off of amazon, took it apart, and rewired it to work for my needs. First off I removed the...
  3. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 Servo Skull!!! I have wanted to make a servo skull for a long time, even before I knew I was going to make this costume. While I was at Joann's I stopped by the Halloween section and found a perfect skull with a detachable...
  4. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 Some glamour shots of the robe with the power pack and servo arm...so far
  5. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 The Tech Priest robes I put off as long as I could. I hate sewing. I can make just about anything out of foam, mdf, or styrene but for some reason my sewing machine and I just usually don't get along. I bought a bunch of...
  6. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 I decided I wanted a mask for my Tech Priest because then I won't have to deal with any prosthetics and I can add some really cool lighting effects for the eyes. Luckily for this build I have an old BioShock motorized patriot...
  7. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 I recently finished a Warhammer 40K servo skull and posted the video for that build today on YouTube.
  8. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 Additional layers of foam were built up to give the impression of a mechanical monstrosity. Some smooth on 325 was colored and placed in a plastic bottle top. This will be attached to the stack on the right side as an...
  9. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 The Tech Priest servo arm was based out of PVC pipes and couplers. The arm was glued together but not at the lowest junction so that it could be taken off of the pack for transport. The pipes were then wrapped or blocked out...
  10. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 I built some walls out of foam to hold the PVC pipe in place. I figured that it would be a lot more stable if the pipe ran all the way through the pack and was glued to the opposite side. The additional bulky sections of the...
  11. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 Next up on my Warhammer 40K Tech Priest cosplay I wanted to start the back pack with the servo arm. I knew that was going to be a little challenging because it had to hold a large arm on one side but not be completely off...
  12. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 A bunch of resin cast odds and ends were added to the Warhammer 40K Power Axe axe as well as some basic LEDs. All of the wires were cut from various scrap I had picked up from a local salvage shop. The handle was wrapped with...
  13. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 Next I started construction on the vice and screw on the back of the axe head. The main screw body was a TNT Cosplay Supply foam dowel wrapped in thinner foam. The vice head ans teeth were once again cut from 2" thick foam...
  14. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 The Mars skull logo was drawn freehand to scale and transferred to 6mm foam. I used a sanding drum and wood burner to smooth and detail the skull. It was glued into place with Barge cement and Bob Smith super glue...
  15. SKS Props

    Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/24/2018

    Re: Warhammer 40K Tech Priest Cosplay - SKS Props Updated 8/20/2018 First off I templated the axe head out of Bristol Board, then transferred that to 2" thick high density foam from TNT Cosplay Supply. This half circle as well as the cogs were glued into place. Then beveled on the belt sander...
Top