-
-
manugu reacted to Shamon's post in the thread An RPF Open Source 5 ft Millennium Falcon Build/Reference Thread. All Are Welcome with
Like.
Thank you, manugu. It means that there was a time when the old number and the new number were displayed together when the numbering... -
manugu replied to the thread An RPF Open Source 5 ft Millennium Falcon Build/Reference Thread. All Are Welcome.There seems to have been a change in numbering, kits had a "pattern number" up to ~1959, then a "catalogue number" and then a...
-
Work on installing the lower hull domes continues. To help get my radii correct, I have designed and printed a radius bar. Well, the...
-
manugu reacted to Shamon's post in the thread An RPF Open Source 5 ft Millennium Falcon Build/Reference Thread. All Are Welcome with Like.
It seems to be a screw hole drilled later. It seems to be the location where the iron pipe passes through the inside.
-
Here is my progress on the engine deck section, it’s not too far away from completion but i took a little break to build the cockpit cone.
-
I've started rough fitting the ABS domes for my build. These are the domes that Stu (eagle1) had vac-formed. While they require...
-
And after a few weeks of slow high detail printing I have the port mandible mostly complete - apart from a little bit of piping left to...
-
I am finally able to see a dream come true with all the new technology available to allow something at this scale to happen a reasonable...
-
Ooo! Thank you! I'll take a look at that.
-
manugu replied to the thread My Studio Scale TIE X-1 Advanced.Hi swgeek, here's something I found concidentally, I'm not sure if this is one of the parts you have been looking for, or if you found...
-
-
manugu reacted to Studio Kitbash's post in the thread Our Collective 5-Foot Millennium Falcon Build with Like.
The hummel plates have a slight inward camber on the upper section, and you HAVE to sand these "flat" as much as possible BEFORE you...
-
manugu reacted to Studio Kitbash's post in the thread An RPF Open Source 5 ft Millennium Falcon Build/Reference Thread. All Are Welcome with Like.
I always wondered if they didn't glue some of these chrome pieces from one of the firetrucks to the back of the Ausf. M/N barrel mount...
-
Hi all!. Here's a few pics of the build as it is now, with the countdown to finishing very shortly & into paint!. Latest work has been...
-
Episode II of my Falcon build is up on Youtube. I have a better mic and lighting system than the first one, so hopefully it's a bit...
-
manugu reacted to Shamon's post in the thread 5-foot Millennium Falcon - parts lists & complementary Info with Love.
Lost parts have been found.
-
-
Loading…
-
Loading…
manugu has not provided any additional information.