-
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with
Like.
Then it was time for reassembly. When I stripped it down I’d cut four wires. There wasn’t enough slack in them to just solder them back... -
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
Oops, slightly out of sequence … the Thompson part was gloss black over silver with a dash of liquid mask in between. Then some weather...
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
Then reassembly commenced, starting with the Spas cage. As anticipated I had to notch out space (both ends) for the receiver detail I’d...
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
Attention then returned to the stock. I stripped most of the factory finish off it, and then splattered on some slightly thinned...
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
Then utilising the same process, here’s the magazine base and grenade launcher end cap…
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
Then onto the shells… - 6 coats of silver - liquid mask - Archive X brown bess - stove polish to dull down the paint and give a dirty...
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
It’s been a little since I posted, so apologies for that. My Pulse Rifle is now finished but I’ll continue on the path to share how I...
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
Next was a bit of work on the stock. There are some visible joints and some screws that don’t exist on the real prop. So all of that...
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
Next up was the barrel shroud. In every reference I could find, the round hole is not punched all the way through. That was easily...
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
My next task was to make the part of the grenade launcher bolt look more realistic. The Snow Wolf part is an aluminium tube with a...
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
Next I turned my attention to the small riveted plate on the SPAS pump grip. So I cut a piece of 1mm aluminium (yes I’m in the UK)...
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
So around 18 months ago I decided I wanted a pulse rifle in my collection. Obviously there are a number of price points for these...
-
AndyHoff reacted to PAULH's post in the thread Snow Wolf Pulse Rifle Accurizing and Repaint with Like.
I decided to start with the grip and get it to an aged wood appearance as would be appropriate for a vintage Thompson. Overall, my...
-
Very well made and looking great from where I stand:cool::cool:(y)(y)
-
I’ve had my 505 for 15 years. Some day, some day... Hey, if someone offered a full conversion kit for a group build, I’m in!
-
-
Loading…
-
Loading…
- Birthday
- Feb 5, 1963 (Age: 62)
Signature
'Don't Hassle The Hoff'