Homemade crucible 2 in black iron cap and close nipple. Long bolt as a handle. Molten metal is around 500°. Treat it with respect.

Homemade crucible 2 in black iron cap and close nipple. Long bolt as a handle. Molten metal is around 500°. Treat it with respect.

  • 0
  • 0
One of the light cages and base ready for paint

One of the light cages and base ready for paint

  • 0
  • 0
Pieces ready for final assembly

Pieces ready for final assembly

  • 0
  • 0
One of the chain attachments, there are two magnets in the casting that allow the chain to disconnect if pulled too hard.

One of the chain attachments, there are two magnets in the casting that allow the chain to disconnect if pulled too hard.

  • 0
  • 0
Finished light cages with the failed metal casting in the background. The cages are two washers connected by plastic webs, glued with 5 min epoxy, the

Finished light cages with the failed metal casting in the background. The cages are two washers connected by plastic webs, glued with 5 min epoxy, the

  • 0
  • 0
The 3 piece plaster of paris mold. I originally planned to put a core in the middle to create a cavity where the metal was not needed, but it "floated

The 3 piece plaster of paris mold. I originally planned to put a core in the middle to create a cavity where the metal was not needed, but it "floated

  • 0
  • 0
The raw casting fresh out the mold.

The raw casting fresh out the mold.

  • 0
  • 0
Melting down electrical conduit connectors in my homemade crucible.

Melting down electrical conduit connectors in my homemade crucible.

  • 0
  • 0
Machining the raw casting on the lathe

Machining the raw casting on the lathe

  • 0
  • 0
Casting off one of the light cages.

Casting off one of the light cages.

  • 0
  • 0
Bondo Castings ready for assembly

Bondo Castings ready for assembly

  • 0
  • 0
Casting the "Battery Packs" for the back of the collar.

Casting the "Battery Packs" for the back of the collar.

  • 0
  • 0
Raw casting of Bondo semi-dressed.

Raw casting of Bondo semi-dressed.

  • 0
  • 0
Finished collar

Finished collar

  • 0
  • 0
Waiting for my fleshburger at Salem Beerworks on Halloween 2012

Waiting for my fleshburger at Salem Beerworks on Halloween 2012

  • 0
  • 0
madmacs

Zomcon Fido Collar build

Photos from my Halloween 2012 build
Click to expand...
There are no comments to display.

Album information

Album owner
madmacs
Date created
Item count
15
View count
662
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

madmacs

madmacs

Media items
45
Albums
3
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top