Hi Guys,
I've been working on collecting all the correct parts:
Here is what I have or know you need for a X1 build.
1946-1953 Schwinn DX frame, the frame is not a straight bar it's a camelback frame where the two top bars have a curve in them. This frame shows up with both abuilt in kick stand and an add-on kickstand which is a greenfield kickstand
You need the matching tank, a guy on ebay called bicyclebones sells them. Note that the real bike has plastic tanks, cause they just vac-formed over an original to make the parts and copies.
You need 29 or 30" wide cruiser bars, wald made these years back you have to really look for them.
The grips are called donkey dick grips, there is a guy on ebay the sells them
Streamers should have a metal cylinder on them, two variets red and white and multi-colored show up in the movie
The fenders are DX fenders but without the trussrod indent only the fork blade indent. They have aftermarket brackets on them.
The springer is a later 1950's to 80's springer with the "S" bolts, not a pyramid springer
The wheels are 26" CMC aftermarket wheels, really hard to find, if you get heavy duty aftermarket wheels you'll be close.
The tires are Carlisle Indian Head Lightining Darts.
The crank is a Takagi Cro-Mo 175x24 chrome crank
The BB is Tange 24 TPI (the bearings and hardware for the cranks)
pedals are vintage Union with yellow reflectors,you can get these for 10.00 bucks at the bike swap.
Seat- Black mesinger9 side diamonds and a rear center oval with "Messinger" debossed.
seat clamp is Schwinn "S" style clamp with a generic round head seat bolt.
front headlight is either a Delta Rocket ray or super rocket ray, with a custom propeller and fins (clear red plexi)
The siren is non-functional pearsons majestic siren- I have a few extras if you need one PM me.
The compass is an Airguide dash compass all black square plastic base.
a shimano 3 speed shifter is on the right handlebar and a dia compe style Tech 3 lever on the left.
The Project box has 2 switches 7MM red and green there is place in Burbank that has the correct size box.
There is mickey mouse bell on the left handlebar, there are two versions soccer and tailor mickey in all green, the bell is the cylinder style (not the hexed shape) with a black button for both images.
The tiger siren, the heads been resculpted but not too crazy changed,
There are two style of housing a large one (rare), and a smaller one common to find.
There is red tubing connecting levers to to the tank.
The tank had three switches the center is 50's automotive start switch with a machined collar, the two other switches are push buttons red one and a black one.
There is machined collar on the right handlebar for the breakaway grip in the movie.
tank emblems are custom- wrapped in chrome tape.
The rear bags are all custom
the lights on the bags are signal stat lights
The latches are available on amazon.
The rings for the red lights can be bought at slingrings.com
I have yet to figure out the "Property of PW" brass plate
The wheel hub swirls are custom and about 8" diameter
The pinstripes are done with white pinstripe tape, I think they might be 3/16th thick
The chrome on the bags and the badges is in chrome tape.