Death Star turbo laser

DJSLY

Well-Known Member
RPF PREMIUM MEMBER
Hi to all,


Here is my new project, this is the scratch construction of turbo laser turret.


I would like to thank Dave for providing me with a great help in launching this project.


Here are the first pictures of my work with the structures in MDF and the beginning of the scracth in styrene.


18301319_1899371833643483_9102877058968431049_n.jpg


18342213_1899371836976816_7082787509481990610_n.jpg


18341800_1899371830310150_8689662451467934054_n.jpg


18275186_1899371870310146_7373130029879377605_n.jpg


18342394_1899371873643479_7855833807826601334_n.jpg


18342823_1899371876976812_7859512923979605099_n.jpg
 
The continuation of the project with the tests of sequencing of the barrel and the rotation of the turret.


 
Last edited by a moderator:
Beginning of the detailing of the armor plates and the different pieces coming from other kits


26991646_10213403099105674_1242666384973734680_n.jpg26993295_10213403101025722_3417607880676850094_n.jpg26993318_10213403103865793_5554957417826020848_n.jpg26993550_10213403099945695_7840252440061698275_n.jpg26994241_10213403104225802_9085630788991607756_n.jpg27067296_10213403102225752_4921431615729855217_n.jpg27067649_10213403100345705_9021494146439080084_n.jpg27067710_10213403102785766_7150008915577921516_n.jpg27067887_10213403101385731_2259083422319723211_n.jpg
 
Thanks joberg,

After a break period, resuming the project, with the continuation of the detailing with various parts from the kit such as JAGPANTHER 1/35, SHERMAN 1/72, KOMATSU 1/48, panther TYPE G 1/48 or SDKFZ 164 command version 1 / 35, in addition to cutting styrene-based shielding plates.


53734504_10216382944519947_8743351377863901184_n.jpg?_nc_cat=103&_nc_ht=scontent-cdt1-1.jpg


53879191_10216382941799879_2441229333390426112_n.jpg?_nc_cat=102&_nc_ht=scontent-cdt1-1.jpg


54377144_10216387070423092_6150988639317786624_n.jpg?_nc_cat=110&_nc_ht=scontent-cdt1-1.jpg


53912518_10216387072823152_8087610949525045248_n.jpg?_nc_cat=111&_nc_ht=scontent-cdt1-1.jpg


54353991_10216391884463440_1668258412657377280_n.jpg?_nc_cat=108&_nc_ht=scontent-cdt1-1.jpg


54523845_10216391889343562_4948636253022060544_n.jpg?_nc_cat=105&_nc_ht=scontent-cdt1-1.jpg


53825922_10216391910904101_7011861627746123776_n.jpg?_nc_cat=104&_nc_ht=scontent-cdt1-1.jpg


54214974_10216391880063330_4609314891537317888_n.jpg?_nc_cat=108&_nc_ht=scontent-cdt1-1.jpg


54523342_10216394667933025_8571570557382819840_n.jpg?_nc_cat=105&_nc_ht=scontent-cdt1-1.jpg


54368138_10216394672613142_618134308875403264_n.jpg?_nc_cat=110&_nc_ht=scontent-cdt1-1.jpg


54436315_10216394676293234_3072304460333056000_n.jpg?_nc_cat=109&_nc_ht=scontent-cdt1-1.jpg


53160212_10216396732224631_300682465595359232_n.jpg?_nc_cat=106&_nc_ht=scontent-cdt1-1.jpg


53970478_10216396733064652_7002469414738067456_n.jpg?_nc_cat=104&_nc_ht=scontent-cdt1-1.jpg


54279050_10216396735544714_6435368693252751360_n.jpg?_nc_cat=109&_nc_ht=scontent-cdt1-1.jpg
 
That is going to be fantastic when it is done!

Is that the 1/48 figure from the Fine Molds Tie? Does that mean this works out to 1/48 scale?
 
Thanks Analyzer,

Yes it is the figurine of the kit Tie Fighter 1/48 Finemolds, it will work with 1/48, I intend to add the X-wing BANDAI and Tie Fighter 1/48
 
This thread is more than 5 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top