Completed Custom Blaster

6 finger wizard

Active Member
So I've been gathering parts and tinkering with this for months now. I plan on building a custom Mando in the near future and wanted to start with the weapons. So I made this
IMG_20170222_132522781.jpgIMG_20170222_132549607.jpgIMG_20170222_132514332.jpgIMG_20170222_132604291.jpg
Out of these (plus some various other bits)
IMG_20160405_053121470.jpg
The design was inspired by the DL-44 and ended up a little reminiscent of the DC-17. It was my first attempt at weathering anything with rub and buff, I might work on the paint job more later on. I'm thinking about adding some heat discoloration to the barrel, and possibly a little Aurabesh decal to the side, that might be too much though.

If you happen to be interested in a more thorough documentation of the process I have a youtube video of it up here https://www.youtube.com/watch?v=zuTk8WVP0jQ.
 
This thread is more than 7 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top