This thread has been available on FX-Sabers.com for a while now but I have decided to post it to this forum as well to ensure the most number of people see it. I made this a while ago but there are still plenty of people looking to build a Graflex so hopefully it will still help people.
Hello everyone!! So I have noticed many people who are purchasing the new Graflex 2.0 kits are new to the hobby and are a little confused and overwhelmed as to where to start when it comes to building it themselves. To help those people out I thought I would go ahead and create an in-depth video tutorial series documenting the ENTIRE process, from start to finish. Below is a link to my YouTube playlist "Let's Build a Graflex". Follow along with the videos and you will find everything you need to build your very own Graflex!! The basic components included in this build are a NBv3 Sound Board and a G.O.T.H. 3Designs "Knight" Chassis utilizing the integrated crystal chamber. Everything else is pretty standard but if you scroll down past the video link you will find a complete list of all of the parts AND tools used in this build. There are many ways to build a lightsaber and this happens to be my way, so if you're just starting out and need a little guidance, these videos are for you! If you are a seasoned and experienced saber technician or smith than you probably aren't going to learn anything new lol.
YouTube Playlist: Let's Build a Graflex 2.0 - YouTube
If you are following the link from my videos here is the complete list of all the parts and tools used in this build along with their links. Of course there are many other options you can choose from but for those just starting out this is a good place to start.
Hello everyone!! So I have noticed many people who are purchasing the new Graflex 2.0 kits are new to the hobby and are a little confused and overwhelmed as to where to start when it comes to building it themselves. To help those people out I thought I would go ahead and create an in-depth video tutorial series documenting the ENTIRE process, from start to finish. Below is a link to my YouTube playlist "Let's Build a Graflex". Follow along with the videos and you will find everything you need to build your very own Graflex!! The basic components included in this build are a NBv3 Sound Board and a G.O.T.H. 3Designs "Knight" Chassis utilizing the integrated crystal chamber. Everything else is pretty standard but if you scroll down past the video link you will find a complete list of all of the parts AND tools used in this build. There are many ways to build a lightsaber and this happens to be my way, so if you're just starting out and need a little guidance, these videos are for you! If you are a seasoned and experienced saber technician or smith than you probably aren't going to learn anything new lol.
YouTube Playlist: Let's Build a Graflex 2.0 - YouTube
If you are following the link from my videos here is the complete list of all the parts and tools used in this build along with their links. Of course there are many other options you can choose from but for those just starting out this is a good place to start.
Graflex 2.0 Parts & Tools list
PARTS
Unnecessary “accessory” parts will be marked with a ** before it. All others are required for a functioning saber.
- Graflex 2.0 kit – Randy Johnson: korbanth47@gmail.com
- G.O.T.H. 3Designs “Knight” Chassis
- Part 1 (Main Shell)(Designed for original 2.0's): Graflex 2.0 - OLD Knight chassis - main shell (TFJ5TTVEQ) by DarthRyo
- Part 1 (Updated for the Graflex "2.1"): Graflex2.0 - Knight Chassis Part 1 - Main shell (4TNHG8SS9) by DarthRyo
- Part 2 (Sound Board Module & Crystal Chamber; NBv3): Graflex2.0 - Knight Chassis Part 2 - NB (WAGUXV4SV) by DarthRyo
- L.E.D. Assembly
- Cree Tri XP-E2 with modified base (B/B/W): http://www.thecustomsabershop.com/Custom-Tri-Cree-LED-with-modified-base-P1139.aspx
- 18 Degree Tri Cree Optic: http://www.thecustomsabershop.com/18deg-Tri-RebelCree-Star-Lens-P778.aspx
- .88” Heat Sink & & Optic Holder: http://www.thecustomsabershop.com/88-OD-Heatsink-module-with-center-hole-P1138.aspx
- Arctic Silver 5 Thermal Paste: Amazon.com: Arctic Silver 5 AS5-3.5G Thermal Paste: Computers & Accessories
- 3.7v 3200 mAh Li-Ion Battery: http://soloshold.com/accessories.htm
- 3.7v Li-Ion Battery Charger: http://www.thecustomsabershop.com/37V-Li-ion-smart-charger-with-21mm-plug-P890.aspx
- 2.1mm Recharge Port: http://soloshold.com/accessories.htm
- 28mm Premium Speaker: http://www.thecustomsabershop.com/Premium-28mm-Speaker-P77.aspx
- Plecter Labs Nano Biscotti v3: http://www.thecustomsabershop.com/Nano-Biscotte-Sound-Module-V3-P806.aspx
- ** Vintage Accurate Red Button Retention Screws: http://graflexshop.com/graflex.htm
- ** .5” Reflective Mylar Tape: http://www.amazon.com/CS-Hyde-Metal...d=1459809332&sr=8-1-spell&keywords=Mylay+tape
- 10 Colors of 30awg Wire: http://www.ebay.com/itm/262217789496?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
- ** 7/8” Graflex Style Blade Plug: http://www.etsy.com/listing/2411971...ry&ga_search_query=kr sabers&ref=sr_gallery_1
- Assorted Heat Shrink: http://www.radioshack.com/products/radioshack-heat-shrink-tube-assortment?variant=5717666693
- ** Acrylic Paint Kit: http://www.amazon.com/Testors-Pint-...459809679&sr=8-6&keywords=acrylic+model+paint
- 8-32 x 1/8” Set Screw (x2): http://www.thecustomsabershop.com/8-32-x-18-Set-screw-P108.aspx
- ** .114” Solid Brass Rod: http://www.amazon.com/Solid-Brass-1...qid=1459809909&sr=8-1&keywords=.114+brass+rod
- ** Natural Quartz Crystal: http://www.amazon.com/Natural-QUART...qid=1459809930&sr=8-1&keywords=quartz+crystal
- 32” x 7/8” Clear Blade with Shine Through Bullet Tip: http://store.vadersvault.com/7-8-diameter-blade/
- Resistor (To be determined by you for whichever LED you are using): http://www.thecustomsabershop.com/Resistors-C19.aspx
- 5mm Crystal Chamber LED (Blue) - http://www.amazon.com/microtivity-I...=UTF8&qid=1459995121&sr=8-7&keywords=5mm++led
TOOLS
- ESD Safe Soldering Station: http://www.amazon.com/dp/B000I30QBW...9810587&sr=1&keywords=esd+safe+soldering+iron
- .032” 60/40 Rosin Core Solder: http://www.radioshack.com/products/rosin-core-solder-2-5-oz?variant=5717825989
- Helping Hands: http://www.amazon.com/Helping-Hand-...&qid=1459810843&sr=8-2&keywords=helping+hands
- Soldering Iron Tip Cleaner: http://www.amazon.com/Hakko-599B-02...xgy_229_2?ie=UTF8&refRID=0EWAYZQQQBPKNYAG3Q6K
- Micro Wire Cutter: http://www.amazon.com/Hakko-CHP-170..._UL160_SR160,160_&refRID=16C4FH2841YQP5WSZ1FG
- 20awg – 30awg Wire Cutter & Stripper: http://www.amazon.com/Hakko-CSP-30-...C_UL160_SR89,160_&refRID=1N2VYT2CY4RQGSD9T7AR
- Hobby Vise: http://www.amazon.com/ProsKit-PD-37...TF8&qid=1459811118&sr=1-2&keywords=hobby+vise
- Heat Gun: http://www.amazon.com/Wagner-050300...=UTF8&qid=1459811293&sr=1-4&keywords=heat+gun
- Assorted Allen Keys: http://www.amazon.com/Generic-Pc-Al...ower-hand-tools&ie=UTF8&qid=1459811680&sr=1-3
- Graflex Bass Pin Removal Tool: http://graflexshop.com/tools.htm
- Multimeter: http://www.amazon.com/Etekcity-MSR-...TF8&qid=1459812270&sr=8-1&keywords=multimeter
- Power Drill: http://www.amazon.com/Black-Decker-...F8&qid=1459812750&sr=1-8&keywords=power+drill
- Center Punch: http://www.amazon.com/Lisle-30280-A...8&qid=1459812787&sr=1-4&keywords=center+punch
- 8-32 Tap & Die Set: http://www.thecustomsabershop.com/8-32-Tap-drill-set-P52.aspx
- Tap Handle: http://www.thecustomsabershop.com/Tap-handle-P1114.aspx
- 2 AA Battery Pack: http://www.radioshack.com/collectio...closed-2-aa-battery-holder?variant=5717216901:
- Copper Micro Smooth Alligator Clips: http://www.radioshack.com/products/radioshack-micro-1-1-8-smooth-clips?variant=5717212101
Last edited by a moderator:
