Boba Debt
Master Member
Are there also little greeblies on either side of the Pistons?
- - - Updated - - -
See what I'm saying?
Yes, they are Philips screws
Are there also little greeblies on either side of the Pistons?
- - - Updated - - -
See what I'm saying?
So, I'm in the process of making a scope mount for a bespin version, and the measurements posted don't add up. I've got the correct mounting hole location, and my scope is at the right height (let's call it to within 1/32" either up or down the gun) and the 1.75" tall scope mount does not come low enough on the gun. It's really off by about .25". Even if the measurements posted are really to the inside edges rather than the outside, it still isn't enough length since the scope mount is ~3/16" material.
I'll be happy to post some pictures in a bit when I'm done. To my eye, the actual height of the scope mount needs to be 2", maybe a hair longer. And I cut one side of a piece of angle stock to 1.125" and it's way short. Again, I'll post some pics in a couple of hours when I get the mount cut the way I believe it should be. I have enough aluminum to make 2 mounts that are longer than 1.75" on one side and 1 that is 1.75" on the long side (the second piece of that stock has the other edge of 1.125", which is too short).
Sorry, I am not familiar with the real model parts. I was also going on the assumption that the parts were originally black. I guess I had the tomtit parts on my mind. :unsure