Destiny Hunter Mask and Armor Cosplay Build SKS Props

SKS Props

Sr Member

• Nov 13, 2014

• #1

Hello again and welcome to my newest cosplay build a Hunter character from the new game Destiny. For those of you that aren't familiar with the game here are some of the reference images I am working from.

A hunter in the game is a stealthy sniper class that uses agility instead of brute force. There are lots of different masks that he can acquire throughout the game I am just picking a single style this time. By having this base I will be able to recreate multiple versions without altering it to much. I will also be constructing the exotic helmet The Mask of the Third Man (the one with the 3 glowing eyes)

Materials:
Head Form from CFX
Monster Clay http://amzn.to/2mIaecs
Smooth-On Rebound 25 http://amzn.to/2nEtSFA
Smooth-Cast 65D http://amzn.to/2mI4Wh4
Plasti Paste http://amzn.to/2nsfoIi
EVA foam 1/2" and 1/4" http://amzn.to/2nmYrgI
Craft foam 1mm-3mm http://amzn.to/2n9zIfe

Barge http://amzn.to/2nn2ycQ
Loctite Super Glue http://amzn.to/2n8RkqI
Styrene Rods and Sheets http://amzn.to/2o1zpXR http://amzn.to/2o9ikb4
Rattle can Primmer and Colors http://amzn.to/2ns6tH8 http://amzn.to/2mHNysW
Liquitex Heavy Body Acrylics http://amzn.to/2o9dNFA
Green LEDs and Coin Ballery holder - 2032 battery http://amzn.to/2o9jZ0D
Plasti Dip Rattle Can http://amzn.to/2o9iK1h
Upholstery fabric http://amzn.to/2n8DlRS
Painters Tape http://amzn.to/2o9iwaF

 

Last edited: Mar 27, 2017

SKS Props

Sr Member

• Nov 13, 2014

• #2

Re: Destiny Hunter Mask and Armor Build SKS Props Updated 11/13/2014

To start off I decided that I would have to sculpt this mask out of monster clay and make a junk mold so that I could refine and add all of the detail to a resin copy.

 

SKS Props

Sr Member

• Nov 13, 2014

• #3

Re: Destiny Hunter Mask and Armor Build SKS Props Updated 11/13/2014

The "vents" on the sides of his face were a little to perfect to sculpt out of the clay. So I made one out of eva and craft foam then molded and resin cast that so they would be symmetrical.

- - - Updated - - -

From here I did a rough sculpt so that I could see where everything was going to go.

- - - Updated - - -

Once I had it close I made a junk mold to get my resin copy

 

SKS Props

Sr Member

• Nov 13, 2014

• #4

Re: Destiny Hunter Mask and Armor Build SKS Props Updated 11/13/2014

So with my resin copy I can now start to refine and add all of the details. The copy is primed and sanded multiple times to start to define the shapes. After the sanding is done styrene is used to start making the details around the goggles and the side straps. The styrene is templates from bits of craft foam so that I know it will fit before I cut it out. The styrene is then heated using a heat gun and formed into place.

 

SKS Props

Sr Member

• Nov 13, 2014

• #5

Re: Destiny Hunter Mask and Armor Build SKS Props Updated 11/13/2014

Additional details are added to the Destiny hunter straps using thinner gauge styrene and glued into place. The top crown was made by first cutting and heat forming styrene into the desired shape. This form was then glued to the top of the mask and filled with bondo. By using the styrene as a wall it made sure that the bondo was at the desired thickness. The bondo was then sanded and filled with putty to get a smooth surface. The details were cut out of the bondo using a dremel.

 

Last edited: Nov 13, 2014

SKS Props

Sr Member

• Nov 13, 2014

• #6

Re: Destiny Hunter Mask and Armor Build SKS Props Updated 11/13/2014

The chin piece and half circles are cut out of a thicker gauge styrene and shaped using a sanding drum on my dremel. The hood in the picture is not the final version I occasionally pick up random curtains from my job that are discontinued. I just felt that it needed something to show more of his in game look..

Instead of making a full helmet I am only making a mask since the character wears a hooded cape. This way it will cut down on material being used and should be considerable more confortable to wear in warm weather.

 

SKS Props

Sr Member

• Nov 13, 2014

• #7

Re: Destiny Hunter Mask and Armor Build SKS Props Updated 11/13/2014

The eye slit on the Destiny Hunter was cutout using a dremel and cleaned up with various sized files. I took the prototype up to midnight release of Halo just to see what some of the Bungie fans thought about it. The response I got so far was great.

 

stevechewbacca

Well-Known Member

• Nov 13, 2014

• #8

Re: Destiny Hunter Mask and Armor Build SKS Props Updated 11/13/2014

I'll watch this with great interest
Well done so far !

 

TheChosenOne

New Member

• Nov 13, 2014

• #9

Re: Destiny Hunter Mask and Armor Build SKS Props Updated 11/13/2014

damn it was quite fast considering the game is out since only fiew months. keep up the good work!!!

 

joshvanrad

Sr Member

• Nov 13, 2014

• #10

Re: Destiny Hunter Mask and Armor Build SKS Props Updated 11/13/2014

Steven, your work is seriously ridiculous. I don't know how you keep churning out high detail work so quickly.

 

Gee2

Sr Member

• Nov 14, 2014

• #11

Re: Destiny Hunter Mask and Armor Cosplay Build SKS Props Updated 11/13/2014

Love it! Look forward to the third man, damn good stuff!!!

 

M

mcoatsey

Active Member

• Nov 15, 2014

• #12

Re: Destiny Hunter Mask and Armor Cosplay Build SKS Props Updated 11/13/2014

Awesome work, look forward seeing it finished

 

SKS Props

Sr Member

• Nov 18, 2014

• #13

Re: Destiny Hunter Mask and Armor Cosplay Build SKS Props Updated 11/13/2014

AARRRRRGGGGHHH!!!!! The feeling I get when I think I am close to molding a piece and I find some new reference images that change my design

I had to go in and cut out the resperators on the sides because I found out they round back more and there is a detail clasp on the end piece. So I broke out the dremel, styrene, and bondo and rebuilt the backside of the mask. Now that it is complete I will say that I do like the overall look better
I have a few more details to knock out and hopefully I should be able to mold this next week.

 

SKS Props

Sr Member

• Nov 22, 2014

• #14

Re: Destiny Hunter Mask and Armor Cosplay Build SKS Props Updated 11/18/2014

Update on the hunter mask. After multiple layers of bondo, primer, and glaze its getting very close to the molding stage. The colors are all over the place so I grey scaled the photo so that it wouldn't be so distracting.

 

stevechewbacca

Well-Known Member

• Nov 22, 2014

• #15

Re: Destiny Hunter Mask and Armor Cosplay Build SKS Props Updated 11/22/2014

Love it !

 

SKS Props

Sr Member

• Nov 24, 2014

• #16

Re: Destiny Hunter Mask and Armor Cosplay Build SKS Props Updated 11/22/2014

My Destiny Hunter mask is now primed filled and ready for molding. I hope to mold it sometime late this week and have a cast to paint early next week.

 

Achilla137

Active Member

• Nov 24, 2014

• #17

Re: Destiny Hunter Mask and Armor Cosplay Build SKS Props Updated 11/24/2014

Looks damn good so far, cant wait to see it completed

 

SKS Props

Sr Member

• Dec 4, 2014

• #18

Re: Destiny Hunter Mask and Armor Cosplay Build SKS Props Updated 11/24/2014

Finally got around to molding the hunter mask

 

stevechewbacca

Well-Known Member

• Dec 4, 2014

• #19

Re: Destiny Hunter Mask and Armor Cosplay Build SKS Props Updated 12/04/2014

Nice !

 

V

vector6ix

New Member

• Dec 5, 2014

• #20

Re: Destiny Hunter Mask and Armor Cosplay Build SKS Props Updated 12/04/2014

dude that looks sweet keep up the good work!