Backwards lamb
New Member
A while back i got a starbuckcylon C3PO head, and only recently got round to building him up.
Here are a few final shots and WIP.
First mock fit with all parts rough trimmed to fit.
After filling and sanding and painting and repeating a few times.
I didn't need the finish to be perfect as i am making a battered C3PO not a perfect factory finish one.
I also heated a section on his forehead and pressed it in to try and match his head dent.
I painted the helmet in stages (i didnt take photos until this stage.)
I primed it. then painted it black, Then a silver, after the silver i went in with some latex on some high points and parts where i thought would be damaged or peeling etc. Then i gave the whole lot a coat of gold.
once the gold had dried i rubbed off the latex to reveal the silver underneath.
i then wired up the eyes and glued it all in place.
(he looks quite shocked about being in to halves.)
I added a sound chip that is meant to be in a gift card or something of the like (cheap and cheerful.)
It has five buttons with a sound on each.
This video is before i did the final weathering of the head.
To weather it down to the final look i wanted i went over one layer of light sanding with a medium grit sandpaper to scratch and scuff it. Then i used some plain printer paper to rub and dull down the gold without scratching it.
Then i gave it a few hits of two or three different browns and yellows of dry brush and washes to get a dusty dirty look.
Then i added some black washes to make him really oily. I added a black oil streak down the back of his head coming out of the rear detail because i thought it looked good.
Final head weathered and all lit up.
Hope you like it.
if you have any questions or comments please feel free to leave them and i will try and answer etc
Here are a few final shots and WIP.
First mock fit with all parts rough trimmed to fit.
After filling and sanding and painting and repeating a few times.
I didn't need the finish to be perfect as i am making a battered C3PO not a perfect factory finish one.
I also heated a section on his forehead and pressed it in to try and match his head dent.
I painted the helmet in stages (i didnt take photos until this stage.)
I primed it. then painted it black, Then a silver, after the silver i went in with some latex on some high points and parts where i thought would be damaged or peeling etc. Then i gave the whole lot a coat of gold.
once the gold had dried i rubbed off the latex to reveal the silver underneath.
i then wired up the eyes and glued it all in place.
(he looks quite shocked about being in to halves.)
I added a sound chip that is meant to be in a gift card or something of the like (cheap and cheerful.)
It has five buttons with a sound on each.
To weather it down to the final look i wanted i went over one layer of light sanding with a medium grit sandpaper to scratch and scuff it. Then i used some plain printer paper to rub and dull down the gold without scratching it.
Then i gave it a few hits of two or three different browns and yellows of dry brush and washes to get a dusty dirty look.
Then i added some black washes to make him really oily. I added a black oil streak down the back of his head coming out of the rear detail because i thought it looked good.
Final head weathered and all lit up.
Hope you like it.
if you have any questions or comments please feel free to leave them and i will try and answer etc
Attachments
-
10028487744_39100780f7_b.jpg295.9 KB · Views: 316
-
10028488194_6d8f6b9d91_b.jpg354.1 KB · Views: 177
-
10028488574_051ed0d52c_b.jpg489.5 KB · Views: 192
-
10028488594_b12802b0b9_b.jpg405.9 KB · Views: 188
-
10028572896_ffd22f0e8b_b.jpg534.3 KB · Views: 268
-
10028572906_dc12436a77_b.jpg327.6 KB · Views: 223
-
10028573155_6c468594a1_b.jpg414.2 KB · Views: 176
-
10028573135_877df2449d_b.jpg501.3 KB · Views: 203
-
10035016916_b785687203_b.jpg281 KB · Views: 158
-
10035016906_b64dfe9b8a_b.jpg273.1 KB · Views: 204
-
10035016856_0a537d6b4b_b.jpg323 KB · Views: 192
-
10036739435_8966e2b606_b.jpg494.7 KB · Views: 255
-
10028487744_39100780f7.jpg99.2 KB · Views: 132
-
10028488194_6d8f6b9d91_m.jpg14.6 KB · Views: 153
-
10028488574_051ed0d52c_m.jpg17.8 KB · Views: 96
-
10028488594_b12802b0b9_m.jpg16.5 KB · Views: 130
-
10028572896_ffd22f0e8b.jpg178.3 KB · Views: 113
-
10028572906_dc12436a77.jpg100.8 KB · Views: 130
-
10028573746_6ba84c013b.jpg128.3 KB · Views: 97
-
10028573135_877df2449d.jpg162.5 KB · Views: 133
-
10035016916_b785687203_n.jpg27.6 KB · Views: 127
-
10035016906_b64dfe9b8a_n.jpg25.5 KB · Views: 95
-
10035016856_0a537d6b4b_n.jpg30 KB · Views: 90
-
10036739435_8966e2b606.jpg176.3 KB · Views: 216
Last edited by a moderator: