Red Hood Build Version 2 (Noob Build) Update 11/3

Re: Red Hood Build Version 2 (Noob Build) Paint Pg 3

Ok so I added the black lines. Well temporarily. I used some compressed charcoal to draw the lines on to the helmet to give me an idea of how it would look if I painted them on. Surprisingly it looked pretty good, so I might just go that route. Still going to try other possible techniques but at least I have an idea of what paint would look like.

Here are some photos. (It really gives the helmet a whole new feel :D)
IMG_20110915_190036.jpg

IMG_20110915_185923.jpg

IMG_20110915_185859.jpg

IMG_20110915_185909.jpg

IMG_20110915_185943.jpg

IMG_20110915_190059.jpg

I think I have a few symmetry problems that may need to be corrected before painted on.

What do you guys think?
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/15

LOL!!! I have both, Red Hood ver.2 ( Thanks BlackKaos ) and Future Batman ( Thanks GJ and Robo ) builds going on right now too. I'll thank you guys again when I eventually start my own thread on my builds. Best of luck to you on your Future Bats build too as your Red Hood ROCKS..... OUTSTANDING builder.
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/15

Judge Spartan - Thanks for the comments. Its greatly appreciated.

dabiddabird - The helmet looks great. When I first seen the pictures I thought you painted the lines. I think the helmet looks just as good with the lines drawn on as apposed to indenting them and painting. Can't blame you either way you do it because I think you have done an excellent job with this helmet.
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/15

Thanks all comments are greatly appreciated. I wish I learned about this stuff a lot sooner lol.
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/15

Small update: Finding time is really hard between work and school. I did get to paint the inner eye area black and may be able to get the lines painted this weekend.

Sorry all I have is my phone camera and some shots are blurred.
IMG_20110924_132353.jpg

IMG_20110924_132548.jpg

IMG_20110924_132412.jpg
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/24

Ok got black lines painted on. I went with a thicker line because I wanted a bold line that could be easily identifiable from a distance. I also wanted them to be more pronounced.

I think it came out pretty good. Still need to add those matte clear coats to bring down the glossiness. What do you guys think?
IMG_20110924_232358.jpg

IMG_20110924_232306.jpg

IMG_20110924_222624.jpg

IMG_20110924_232254.jpg

IMG_20110924_232343.jpg
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/24

Wow! It really looks great. Amazing work, and I completely agree with your decision to do the more pronounced black lines. Awesome job!
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/24

Thanks guys. All I need now is padding the inside and installing the lenses. Oh and matte clear coats.
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/24

It looks great I would honestly take a dremel engraving bit and follow the black line on the helmet, but that's just me it looks great how it is now.
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/24

Tgirookie said:
Looks very nice. Should make a mold out of it...
Click to expand...
I wouldn't even know where to begin lol

mcoatsey said:
The helmets looking sweet dude, looking forward to seeing full outfit
Click to expand...

Thanks little by little its coming together.

Vagabond said:
It looks great I would honestly take a dremel engraving bit and follow the black line on the helmet, but that's just me it looks great how it is now.
Click to expand...

Thanks. Yea that's what I originally wanted to do but its not that thick and I feel might cut clean through it :confused

I think I may make another one but that is a 2 piece with a hinge. That way it fits closer to the face. And build up bondo to engrave the lines
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/24

So did 2 different test for the eyes tonight. I will still be trying others, and will take suggestions too :)

Here are the two that I tried today. Sorry for crap photos.
IMG_20110930_211322.jpg

IMG_20110930_211145.jpg

IMG_20110930_211154.jpg

This one is poly mesh with with perforated plastic.
IMG_20110930_211209.jpg

IMG_20110930_211223.jpg

And this one is just white poly mesh.

What you guys think? Suggestions? I was trying lenses but the ones have have don't fit the shape of the eye holes to well. (Issues mostly due to the curvature of the lenses)
 
Re: Red Hood Build Version 2 (Noob Build) Update 9/24

While I like the feel of the left eye, I think the straight lines and sharp angles contrast the smooth round eye opening. Maybe the shape of the right eye, but smaller? And if you can see out of the mesh OK, I'd say use that and not the perf plastic.
 
This thread is more than 7 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

ThreeEvening
Red Hood: First Cosplay Build
Replies
5
Views
270
ThreeEvening
ThreeEvening
YankeeJones
Riddler animatronic build
Replies
3
Views
167
twoface1942
T
cloninaround
The Batman (2022) - Full Costume and Gadget Build
2
Replies
20
Views
2,653
ThreeEvening
ThreeEvening
STEALTH
BATMAN (1989) EVA Foam Cosplay - Full Build
Replies
11
Views
1,611
STEALTH
STEALTH
TheVelocity7
Xcoser Red Hood Helmet Dosent fit
Replies
0
Views
476
TheVelocity7
TheVelocity7
Back
Top