Page 1 of 4 1234 LastLast
Subscribe
  1. Fullmetalsam's Avatar
    Member Since
    Jan 2010
    From
    Quebec, Canada
    Messages
    158
    Apr 28, 2010, 8:30 AM - Foam Pipboy 3000 (from Fallout) Tutorial #1

    I was inspired by Fetts.Sobriquet thread on how to put together an Ironman suit using a plastic trashcan. I thought I could share my knowledge as well on a prop I haven't seen built very often. I also figured I could use this new thread to introduce myself since I'm new to the forums.

    I've been in costuming and prop-making for just about 5 years and I've got a thing for armor. I've built up my skills over time and I've been trying different techniques and material, but I always come back to the same thing: foam (in all its readily available format: craft foam sheets, camping mat, etc.). Most of the time, I don't have a lot of budget for my projects (when I started it was because I didn't have much budget and now it's because I have too many projects ), so foam is a pretty cheap material that I've learned to use to do some pretty decent props and costume (well I find them decent). The project I am most proud of now, is the Space Marine Chaplain in Terminator Armor I've completed last year.
    Anyhow - on with the tutorial:

    I built this pipboy because I wanted to put together a Fallout vault-dweller costume so I'd have something "confortable" to wear on convention sundays. I wasn't able to get my hands on the pipboy clock from Amazon (live in Canada and didn't want to pay the prices I've seen on eBay for this) so I decided to try my luck with my foam sheets and here is what the finished product look like:


    ***What you need***
    - 2mm foamies
    - 6mm foamies
    - hot glue
    - exacto knife
    - studs (I used regular screws for this)
    - Paint

    ***Templates***
    These templates were drawn for using an iPod touch as the screen and they are scaled to my big meaty arm - so most people will have to scale it down a bit. Also, when printing, make sure you select "None" under scaling method... because when I test printed them the first time, I saw that the second page was scaled down a tiny bit (just to fit my printer margin). I rescaned my template including more piece, so I've added a page 3 to the template document. You'll see that some pieces are duplicated - it's because I thought the template #4 was better seen on page2 (instead of page3), so left page2 in there.

    Just for reference - my pipboy is about 9.5" long with the "screen-part" being about 8"x 6".

    I didn't include a template for the "bracer" ... as it will be different for everyone. However, you can easily google how to draw a truncated cone shape (which is what you'll need for this part of the pipboy)

    ***Building the Base***
    Essientially, it's about stacking the foam sheets in the right order (gluing them one on top of the other).

    You can see the templates have been numbered and this is how they should be stacked:

    *Top*
    Template #2 - 6mm
    Template #1 - 2mm
    Template #1 - 2mm
    Template #3 - 6mm
    Template #3 with small piece - 2mm
    Template #3 with small piece - 2mm
    Template #3 - 6mm
    Template #3 - 6mm
    Template #4 - 6mm (4 layer of template are needed at the bottom)
    *Bottom*

    Now to explain why it's stacked this way.
    1.the Template #2 is the raised plate of the pipboy.

    2.there are 2 template #1 stacked under template #2, this is to be able to make this part of the pipboy (see picture)


    So, on the first layer of Template #1, you have to remove the part here and here.


    On the second layer of Template #1, you have to cut small lines out, so you get the recess "grill"

    3. If you want to add a speaker for sound (since I was using an iPod touch and not an iPhone, I added a speaker), then remember to cut the space needed in layer 4 (template #3). I had to install mine and test it before finishing the foam block, because I couldn't get it in there after.

    4. The small piece I'm referring to for layer 5 and 6 (Template #3) is this one:


    So you can make this part:


    5. For the last 4 layers, there only purpose is to build thickess on the back side so it reaches your arm when you attach it to your "bracer". To get a good fit, you,ll have to "carve" a curve into these layers. Also, I'm saying you need 4, but it's only a minimum, I could have added more and the pipboy would look a bit better from this angle.

    ***Finishing the sides***
    OK - so we've got a foam block, it's time to clean it up a bit. What I did to get a "cleaner" side is that I used the exacto knife to cut excess foam from all the layers. Once this is done, you take 2mm craft foam and you apply it to all the side of the pipboy. As a general rule, I always cut my craft foam piece a little bigger than what I needed and cut them to size once they were glued to the side. This way I could get clean edges (well they are not clean clean - but it's easier to make it look clean that way).

    ***Adding details to the screen section***
    Now to add that raised "screen protector" you see on the side of the pipboy, I used a strip of 6mm foam that I glued on the raised plate. It's not glued to the inside of the screen hole, it's really glued on the plate. After this is glued on, I used a strip of 2mm foam that I glued to the 6mm foam strip to make it look nicer. Make sure the joint between the start and end of those strip is at the bottom center of that screen hole. This part of the strip will be hidden under the plate where you find the 3 button-lights.


    Hehe... so don't follow what you really see on the picture - on the picture, you see the seam at the top of the screen, but you're better off hiding it under the faceplate

    For the plates with the button-lights, you need 2 strip of 6mm foam. The first should be 2.5" x 1.5" (plate1) and the second should be 2.5" x 1.75"(plate2). Plate1 goes on the side of the pipboy and should be touching the bracer as well as providing support for the plate with the lights (so it should come up a little bit over the raised plate of the pipboy). You'll have to cut the bottom of the plate1 at a taper to make it fit perfectly on the bracer. When plate1 is glued on, plate2 is glued on top of the plate1 (the bottom of plate2 should not be aligned with plate1, you should have a bit sticking out) and on top of the screen protector (same thing here, the plate should stick out a bit over the screen). Cut the arrows out of 2mm foam and you're set.


    The lights I used on my pipboy are regular 5mm LED with metal LED holders. I cut 3 holes in plate2 and glued the LED holder there. The LED are inserted from inside the pipboy because they are wired to a switch and a battery pack.

    ***Adding details to the left section***
    So now on to the missing details.
    You need to add the 2 tapered walls on the bottom left part that is sticking out (done with scraps of 2mm foam).


    Use the templates for the other details and glue them where they need to be placed. I haven't included a "screen" for the top detail (it should be the radiation meter if I'm not mistaken)... but it could be easily done by using clear plastic and sticking a white led right underneath. This is something I plan to do in my next version


    For the knob on the bottom dial - in my original version (the one pictured in this tutorial) I freehanded the thing in foam, however in my other version I'm using a wood flower pot used for modelling. I hot glue a screw in the center of the pot and that's how I attached it to the pipboy so it would still move.

    For the round knob just beside the screen, you just need to cut a circle of 1.25" diameter out of 6mm foam. What I did to make it cleaner was to sandwhich it between 2 scraps of 2mm foam, glue a strip of 2mm foam around it and cut groove into that strip. Once this is done - it should fit right in.


    ***Studs and Painting***
    So, if you've done the bracer, then you should be nearly done.
    Only thing left would be painting and screwing the stud on. The screws I used for the stud are 0.5" long and the foam is strong enough so they get a good grip. So no need to hot glue them on, they shouldn't fall off even if they are only screwed on.

    As for painting, I always use the same process and it makes up a very durable paintjob.
    1. Apply 2 coats of Flexbond (latex/glue from Rosco)
    2. Paint using Krylon brand spraypaint
    3. Apply 1 coat of flexbond over paint
    4. Apply 1 coat of matte finish (gloss finish (or paint for that matter) doesn't work with foam... it will all crack for sure)

    And you're done.

    Thanks for reading.
    Last edited by Fullmetalsam; Apr 28, 2010 at 12:20 PM.
  2. RPF Premium Member Fetts.Sobriquet's Avatar
    Member Since
    Nov 2009
    Messages
    609
    Apr 28, 2010, 8:39 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #2

    WOW! That turned out great. Looks like I have new project
    Thanks for making this!
  3. Fullmetalsam's Avatar
    Member Since
    Jan 2010
    From
    Quebec, Canada
    Messages
    158
    Apr 28, 2010, 8:55 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #3

    Templates link is up.

    Thanks for your comment Fetts.Sobriquet... it's only fitting that you'd be the first to reply to this thread - since it was inspired by yours
    Last edited by Fullmetalsam; Apr 28, 2010 at 12:20 PM.
  4. Aideon's Avatar
    Member Since
    Nov 2006
    Messages
    74
    Apr 28, 2010, 10:12 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #4

    Looking good!
  5. Member Since
    Nov 2009
    From
    Melbourne, FL
    Messages
    140
    Apr 28, 2010, 12:25 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #5

    This is great. I also enjoy using foam in my projects, as well as foamcore poster board. I think I'll use your templates and make one for myself and a few friends.

    - Rob
  6. blownhemi's Avatar
    Member Since
    Jun 2009
    Messages
    228
    Apr 28, 2010, 12:47 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #6

    My 13 year old just started playing the game and I think he really might like one of these. Thanks for the awesome tutorial!
  7. Member Since
    Jan 2010
    From
    Tennessee
    Messages
    85
    Apr 28, 2010, 1:33 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #7

    Thank you! I'll Have to try this soon.
  8. Skruffy's Avatar
    Member Since
    Jan 2010
    From
    Space City, TX
    Messages
    180
    Apr 28, 2010, 3:13 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #8

    That does look very nice. I love the DIY angle. Great job!
  9. Xxblackbird's Avatar
    Member Since
    Jan 2009
    Messages
    440
    Apr 28, 2010, 4:55 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #9

    You. Are. AWESOME. Thank you for posting this. I've wanted a Pipboy for a while and I love that you used inexpensive and easy to us materials. I can't wait to start building mine.
  10. RPF Premium Member G17RDY's Avatar
    Member Since
    Dec 2007
    From
    Scotland
    Messages
    777
    Apr 28, 2010, 4:58 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #10

    Fantastic Post - Awesome tutorial and a truly cracking pip boy - well done sir!!

    & Welcome to the RPF!!!!
  11. Member Since
    Nov 2009
    From
    California
    Messages
    23
    Apr 28, 2010, 5:18 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #11

    That turned out amazing - I may just have to build one of those. Very well done build and tutorial.
  12. Fullmetalsam's Avatar
    Member Since
    Jan 2010
    From
    Quebec, Canada
    Messages
    158
    Apr 28, 2010, 6:37 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #12

    Thank you everyone for the good comments... it's very exciting to see that many people interested in building one.

    If you ever decide to put one together and you have question - come back and post them here... I'll answer them if I can
  13. RPF Premium Member kevinericon's Avatar
    Member Since
    Jun 2006
    Messages
    504
    Apr 28, 2010, 7:23 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #13

    Wow, it turned out great! Very inspiring work indeed.
  14. JamesHook's Avatar
    Member Since
    Apr 2010
    Messages
    30
    Apr 28, 2010, 7:29 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #14

    Great work, You make it look so easy!
  15. Member Since
    Oct 2010
    Messages
    2
    Oct 21, 2010, 7:35 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #15

    I have a few questions about this tutorial. I hope someone here can answer them.

    About the truncated cone-shaped arm bracer: Assuming it is made of a sturdy foamie, is it a solid shape that you slip your hand through, or more of a vecro-fastened wrap-around?

    Wondering how you insert and remove your iPod. If you attach your Pip Boy at all points firmly to the arm bracer, did you leave a slot somewhere in the side of the foam layers to slip the iPod in and out? The photo shows the front as a continuous one-piece look where the Pip Boy and bracer are attached, so maybe you left the back open-able for iPod access?

    Also wondering what kind of support you placed under your iPod to keep it at the correct depth. Inside the foam stack is an iPod-shaped column of empty space. Maybe you rolled up a sturdy foamie, or carved a hunk of styrofoam to fill the space?
  16. Formerly cobalt crimson Wes R's Avatar
    Member Since
    Jan 2010
    From
    Western PA
    Messages
    10,196
    Oct 21, 2010, 7:49 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #16

    This is handy until a new kit comes out plus i can beat the snot out of it and only be out a few bucks lol
  17. Fullmetalsam's Avatar
    Member Since
    Jan 2010
    From
    Quebec, Canada
    Messages
    158
    Oct 21, 2010, 8:48 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #17

    Jenimosity said: View Post
    I have a few questions about this tutorial. I hope someone here can answer them.

    About the truncated cone-shaped arm bracer: Assuming it is made of a sturdy foamie, is it a solid shape that you slip your hand through, or more of a vecro-fastened wrap-around?

    Wondering how you insert and remove your iPod. If you attach your Pip Boy at all points firmly to the arm bracer, did you leave a slot somewhere in the side of the foam layers to slip the iPod in and out? The photo shows the front as a continuous one-piece look where the Pip Boy and bracer are attached, so maybe you left the back open-able for iPod access?

    Also wondering what kind of support you placed under your iPod to keep it at the correct depth. Inside the foam stack is an iPod-shaped column of empty space. Maybe you rolled up a sturdy foamie, or carved a hunk of styrofoam to fill the space?
    I already answered your PM - but in case someone else is wondering about the same things.

    The bracer is a solid shape that I'm able to slip my hand through. I had built it a bit bigger than my arm since I'm wearing it with a vault dweller jumpsuit... so my hand easily slip through and then I tuck the jumpsuit underneath.

    I squeeze the pipboy in through the bracer - I cut a hole in the bracer once it was attached to the main pipboy part and that's how I can get it in. As for keeping it at the right depth... the way my pipboy is made, the hole for the iPod is a bit to small - so when I put the iPod in there, it's secured in place by the foam "pushing" on it from all side. No need to add anything underneath.
  18. Member Since
    Aug 2010
    From
    Hagersville, Canada
    Messages
    61
    Oct 21, 2010, 10:33 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #18

    That's a very cool build. Quite impressive. I also love the Terminator build you did. Robo, on the other hand, is just amazing. I love that game and that is a really awesome job of creating one of my favourite characters from it.
  19. Fullmetalsam's Avatar
    Member Since
    Jan 2010
    From
    Quebec, Canada
    Messages
    158
    Oct 21, 2010, 4:44 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #19

    Thanks for the comments CaptainSmith.
    Creating Robo was really a challenge and I can't say I loved every minutes of it... and even in the end, I'm sad it's so uncomfortable to wear - but I still love and am so proud of how it looks.

    @Cobalt Crimson
    Since it's made of foam - it would probably even survive the abuse
  20. Member Since
    Feb 2011
    Messages
    20
    Feb 9, 2011, 4:09 PM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #20

    This is very impressive, and I think I am going to try it. But I feel like making a quantum cola Pip boy instead...
  21. Fullmetalsam's Avatar
    Member Since
    Jan 2010
    From
    Quebec, Canada
    Messages
    158
    Feb 10, 2011, 9:01 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #21

    Thanks Faeelin.

    What does a Quantum Cola Pip Boy looks like exactly ?
  22. Member Since
    Feb 2011
    Messages
    20
    Feb 11, 2011, 8:07 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #22



    I wanted to be different .

    I should just be buying sheets of foam that are 9x12 to use for the base, right?
  23. BoozeBeGood's Avatar
    Member Since
    Nov 2010
    From
    Illinois...West suburbs of Chicago
    Messages
    743
    Feb 11, 2011, 8:36 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #23

    Great tutorial!!! My gf's younger brother loves this game. May have to take a stab at this
  24. Fullmetalsam's Avatar
    Member Since
    Jan 2010
    From
    Quebec, Canada
    Messages
    158
    Feb 11, 2011, 8:58 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #24

    Thanks !
    I love to see your progress - come and post it here if you want to, or post a link to a new thread you'd start to show off your pip-boy.

    @ Faeelin: Yeah, 9"x12" is OK... whatever is cheaper for you (if you can find larger cheaper sheets in your area).
  25. Member Since
    Feb 2011
    Messages
    20
    Feb 11, 2011, 9:58 AM - Re: Foam Pipboy 3000 (from Fallout) Tutorial #25

    Thanks. I wasn't sure how much foam I should buy, but it doesn't seem that expensive so I guess it's better to buy too much than not enough.

Similar Threads

  1. Replies: 7
    Last Post: May 17, 2014, 4:12 AM
  2. Fallout 3 Pipboy 3000 Build
    KamiCat, Replica Props
    Replies: 4
    Last Post: Oct 26, 2013, 2:24 PM
  3. Fallout PipBoy 3000 finsihed v1.0
    daveybox, Replica Props
    Replies: 4
    Last Post: Sep 24, 2013, 9:45 PM
  4. Replies: 3
    Last Post: Feb 17, 2013, 6:16 AM
  5. Fallout 3 Vault Suit & Pipboy 3000
    Jenimosity, Replica Costumes
    Replies: 2
    Last Post: Nov 11, 2012, 4:41 PM