I got on board with a build with a friend who wanted to build a whole abc warrior from scratch and make it move and such. I did the research and came across a company called Golden Armory. I don't know much about the company or who runs it. I sent my buddy the link to the place and told him this will save me some time since the head is to scale and I needed one to base my mechs for.
I got the product fast 2 weeks or less. The packing could have been a little bit better since it is a plaster cast and was sent USPS. I will break down each part as I get to it in the kit. I have alot of large scale before pictures so you can see from start to finish. These casts are extremely rough. With the looking around I have done this is not a pure replica of the movie one. No biggy the side plates are totally off from the movie. So I will drop a link to my Photobucket so you can see how it came..
My first piece I will be working with is the lower jaw. I have spend about hour sanding threw some cheap laq. primer. I used the primer as a guide coat so I can see how true it was lets say it's not. I wonder how many recasts were made off each version the details are lost and alot of the seams will have to be remade and built out like the part where it made to look like 2 parts the seam line is barley there and just about flush. I have found alot of pin holes some were so deep I will have to rebuild the bottom surface of the jaw the edges are all broken and large hollow spots.