My new Mark 7 helmet

Spardax

Spardax

Active Member
After the first attempt to realize my mark 7 helmet from depron unique template with a good result in the shape but few not correctable defects such as the asymmetry of the ears, I have decided to use Darkside501st's Mk VII helmet pep file for a new attempt.
The 3d model is almost perfect and you can find it at this link: http://www.therpf.com/f24/darkside501sts-iron-man-mk-vii-pepakura-files-new-pics-pg-100-a-139470/

This is my work in progress:

img2013040800551.jpgimg2013040900553.jpgimg2013040900558.jpgimg2013040900559.jpgimg2013040900564.jpg
 
afzafri said:
nice job dude...always wanted to start mine....btw where and how did you place the magnet? thanks
Click to expand...

I used 16 neodymium magnet with 4mm diameter and 2 mm thickness. I drilled with a tool of 4mm and after i put the magnets in the holes.
8 magnets on the helmet and 8 magnets on the faceplate.
In this photo you can see the position.
img20130501007312.jpg

But be careful, with putty and paint the attraction power is reduced so you can follow two ways: you can insert two side levers or more powerful and larger magnets:)
 
Spardax said:
I used 16 neodymium magnet with 4mm diameter and 2 mm thickness. I drilled with a tool of 4mm and after i put the magnets in the holes.
8 magnets on the helmet and 8 magnets on the faceplate.
In this photo you can see the position.
View attachment 181926

But be careful, with putty and paint the attraction power is reduced so you can follow two ways: you can insert two side levers or more powerful and larger magnets:)
Click to expand...

Ohhh cool! thanks :D
 
4 Neodymium magnet for the rear helmet and two tabs as lateral support:
img2013050800766.jpgimg2013050800768.jpgimg2013050800771.jpgimg2013050800774.jpg

Emotions!!!!!:lol
img2013050800770.jpg

The new ears in forex/sintra (PVC):
img2013050800775.jpgimg2013051000799.jpg

The future is coming!:cool
img2013051000798.jpg
 

Attachments

  • img2013050800768.jpg
    img2013050800768.jpg
    21.6 KB · Views: 183
dude this is epic im curently re building my mk7 helm and i so hope it comes out as good as yours :) and your fiberglassing is so clean man great work
 
This thread is more than 10 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.

Similar threads

Marthony
Iron Man 2020 helmet pepakura file?
Replies
0
Views
268
Marthony
Marthony
A
My Daredevil, s2 Costume
Replies
3
Views
342
AZ Groot
A
Cbstudios
Mark 1 Iron Man helmet replica
Replies
1
Views
1,049
Cbstudios
Cbstudios
lucas07
size for my raimi mask
Replies
0
Views
230
lucas07
lucas07
Distortiontech
My handmade daredevil s3 replica mask
Replies
5
Views
444
Distortiontech
Distortiontech
Back
Top