Haven't looked into it yet but when I do, I will certainly share. I have a neat idea for the eyes you might like! Already have it ready just waiting for the right time to share, haha!
I'm currently in the process of molding my sculpts and plan on casting them with dragon skin (silicon rubber).
From my understanding, DragonSkin needs to be degassed or placed in a vacuum chamber before pouring into the mold. Would the items below suffice?
Nalgene 5305-0609 Polycarbonate Vacuum Chamber Jar with Polypropylene Vacuum Plate, 4.7L Capacity, 6-5/8" OD x 9-3/8" Overall Height - Nalgene
Equus 3620 Vacuum Gauge - Equus
Mastercool 90066-A Vacuum Pump - Mastercool
WOah thats is AWSOME!
I have used Dragon skin before along with a few close friends of mine. I, and they, have done it with out degassing. Def saves some cash, and worst case is you'll notice micro air bubbles in your casting but you really need to inspect it to notice. Are your pouring or injecting???
So would you recommend using Dragon skin for this project?
Well I pulled my first casts today!
The sculpt wasn't perfect to begin with so I will have to do some finish work on both of them, but here are the SAIS!
Will start the molding process for the head and arms next week and hopefully have a pull by the end of the week. This is starting to be fun!
p.s. project is looking great!
With the home remodel we are currently doing and Father's day, didn't get any real progress on the project. But keeping anyone who follows along updated, here's a shot of the molding process
See Ya RPF'ers
The whole thing is just brilliant! Lovely work on the face sculpts! I'd say they should have waited to use you for the films, but then I'd have been too old to have caught the need to "dress like a Ninja and kick things"-thing, then the desire to do karate, then taijutsu, then ninjutsu, then Japanese "koryu" bujutsu, then the desire to come to Japan to do it, and I'd have missed the last 9 years I've spent in Japan training in classical Japanese martial arts (koryu)!!!
So what I'm saying is, it's a GREAT cast, and even better NOW!!
Oh, the plural for all Japanese words is the same as the singular, so "Sai" stay "Sai", even when there's two of em'! Not "Sais"...(Although the words actually Okinawan, not strictly "Japanese"...But that's a little more info than any of us need!!)...
Great stuff! Please keep up with the photos! I'm loving them!
Last edited by fifthchamber; Jun 18, 2012 at 2:12 AM.
WOW!!!!!!!! brings back sooo much memories back in the 90's!! I still have the TMNT movie collection and soundtrack!!
Your knowledge of the Japanese and their culture is pretty cool. Now I know that there is no change from singular to plural, learn something every day!
Thank you also Hanzo!
I have been watching the TMNT movie collection like a broken record!
With every person's kind words it inspires me to work harder on this project. So thank you everyone!
Today I had a couple of hours to work on the project. Finished the other half of the jacket shell and got one leg lifecast ready to start sculpting on!
WOW! Deric this is serious stuff man...
This project of yours simply shows how dedicated and talented you are, and I admire every bit of it ... Excellent work dude...
I guess your room looks like a small satellite work shop of Stan Winston studios... LOL
I also been wanting to get my hands on this clay thing but haven't find time yet and I'm not sure if I have the patience for it...
You're doing great and keep it up!... more photos please
Thanks pRoJectEarth7 !
I'll try to keep it up to date with photos! You continue to blow my mind with your innovativeness with each of your IM projects! With your skills you could do wonders with some clay, but your also amazing in the mediums you already use!
Got the jacket shell split and back off of the silicone mold.
Now I need to cut a seam up the silicone mold so I can remove the sculpt and begin molding with dragon skin (silicone rubber).
So below is a picture of the arm below with a back profile (left) and a side profile (right).
Any recommendations from experienced molder makers out there? Keep in mind that the jacket splits alone the sides forming a two part jacket (front and back).
As soon as this is done I should have a pull out in no time!!!
Thanks RPF'ers for your help!
Bump for last post.... anyone?
LOL I just had to give a "good on ya" for this. Now can you also please slap everyone who says "Ninjas"?Oh, the plural for all Japanese words is the same as the singular, so "Sai" stay "Sai", even when there's two of em'! Not "Sais"...(Although the words actually Okinawan, not strictly "Japanese"...But that's a little more info than any of us need!!)...
OP - I don't know if I read anywhere in the thread, but is there a specific reason you're not just using real sai? Scale is right... Not to knock your sculpt of them or anything.
Well I just finished my first pull..... and its the last for that mold, crap!
The print coat of rebound 25 was pealing away from the rest of the rebound 25 as if there was some inhibited curing??
I went ahead and used the mold and figured I would test the rest of the process.
Here is the results. It did a good job of picking up all the texture.
Have learned from the process and hope to fix the problems. So I will keep the sculpt from this mold and repair it and try again later. Next, will be trying a cast of the other arm. HOPE IT WORKS BETTER!!!!
Just some pic's of work going on today...
Any critiques are welcome, especially in the early stages.. hahahaa
Chive on brother
Looks so good man, I can't wait to see the head cast! Shame about the mold though. The only two things I could think of making the cast do that is A) How long did you let the sillicone cure up for before appliing the next layer? or B) I know ANY kind of latex will make sillicone go all funky, even really small amounts. Keep it up man!
Last edited by Welmanshire; Jul 5, 2012 at 9:35 PM. Reason: spelling
Looking awesome man! I'm an experience mold maker if you have any questions shoot me a message. I'm looking forward to seeing more! Question: When you filled your mold with dragon skin did you just pour it in and slosh it around? Looks like the casting came our great!
In other news, progress hit a speed bump as we remodeled our home the past few weeks. But, its finished and its time to get back to work.
Here is what I know call my STUDIO! hahaa
And as you can see in the last pic, I have started the upper legs!
And the right leg is near complete
I have also repaired the right arm and will begin to mold it again soon.
Can't wait to start molding the head!!!
Have considered starting a new thread in the Replica Costume thread, because this is really what I think it is, even though there is sculpting? Does anyone agree?