WAR MACHINE Build (Ironman done pg2)

Welcome, Im new here too and have my complete armor pepped and in the middle of resin. Great work on the helmet, keep at it and dont get discouraged, its soooooo worth it.

The pep looks good dude

Nice pep man, I'm working on a warmachine too, but the pepping takes ages for me xD How long did it take you to make that helmet (and which file did you use), so I will know if I'm just slow or impatient haha.

@guyver3869 Sweet! Which one are you working on? Thanks for the encouragement

@SemperBourne Thanks

@markkNL I think I picked some hard parts to start on heh. I've done a few helmets and started pepping Zabana's hands soooo yeah heh. I'm not sure if I'm fast, slow or whatever. I feel I'm moving slow, but this one took me around 6 hours to do. The hardest time I have is trying to see the numbers, in the tight places it catches me up. All the files I got for the War Machine build are from this thread http://http://www.therpf.com/f24/war...eam-up-113492/ I think I might have had to go to the 405th for some files, but it's basically the same thread. I can't remember where I got the Iron Man files, I believe they're all Robo's though.

Wtf 6 hours? I couldn't even cut out all the parts in 6 hours. I'm currently making the HD warmachine helmet though, don't know if that has more parts then this one

markkNL said:

---

Wtf 6 hours? I couldn't even cut out all the parts in 6 hours. I'm currently making the HD warmachine helmet though, don't know if that has more parts then this one

It had quite a bit. I don't have it in front of me right now but I believe it's in 4 or 5 separate pieces. The first helmet I did was dungbeetles iron man helmet and that took me around 7-8 hours. It took me about 4 hours to cut it out. Then the next helmet I did was the HD version Iron Man the sharkhead dubean version I think and it took me only an hour to cut out the pieces and maybe 4 to put it together. After building them a few times I kind of understand the layout more I suppose you could say. Like i figure what tabs I need and which I can do without or cut them a little differently. It's hard to describe exactly. I don't know if it helps that I'm an artist and have a pretty steady hand. I use an xacto knife to cut so I guess it's almost like outlining for me. Then I run over all the fold lines with the blade lightly so everything foldes a bit easier.

the mask looks awesome so far man! what kind of card stock did you use, because i see you just printed it straight onto the card stock. the way i'm doing it, i have to trace it on to the card stock and then cut it all out. the card stock i have right now is 110 lb card stock and is about 10"x24". this looks a lot simpler though.

MadHatter250 said:

---

the mask looks awesome so far man! what kind of card stock did you use, because i see you just printed it straight onto the card stock. the way i'm doing it, i have to trace it on to the card stock and then cut it all out. the card stock i have right now is 110 lb card stock and is about 10"x24". this looks a lot simpler though.

Thanks I actually need to update with some new pics since I have alot done now. I printed it out on 110 lb card stock. Mine was 11 x 8.5 though so that might be where you have the issue. Just get smaller sized paper, but with that size alot of the templates need rearranging.

I actually have a whole bunch more pics to post, but I'm getting ready to head out and was just excited about this one.

I'm not sure if this can help anyone,but I'm 5'3" (kinda small I know) I plan on wearing some lifts to help with the suit. Here's some measurement and what i used for my size.

Head-22" around 17 cm wide/ Helmet used default size fits snug

Neck- 14 1/2" around
Chest- 37" / Torso I used 1.4 scale which you can see in the pic I like the way it fits but limited movement with my head due to the closeness of the neck. I feel I may have to do some mods to it, but I do like this size. I originally built the torso at a 1.565 scale and it's way too big the bottom came almost all the way down to my waist.

Nice pepakura!!!

electraflier said:

---

Nice pepakura!!!

Thanks

Exellent ! Another wm, the brotherhood keeps growing

Your head is 22" did you build it at default scale and it fit you? Just curious as I want to make one myself with that file. My head is the same diameter
Thanks

Everything is looking good so far man.

STEALTH said:

---

Your head is 22" did you build it at default scale and it fit you? Just curious as I want to make one myself with that files.
Thanks

Yeah I think I may put some supports in it to when I harden it just to widen it out at the top slightly near the eyes but yeah. Gonna have to flatten my hair out a bit too (haha I have a mohawk) but yeah I used the HD war machine helmet at the larger size.

Thanks man. I appreciate the fast response.

STEALTH said:

---

Thanks man. I appreciate the fast response.

No problem

I used mine at the same size too, it fits me perfect

made007 said:

---

I used mine at the same size too, it fits me perfect

Yeah I couldn't really afford to go much bigger because of how small I am. I didn't want to look like a bobble head heh.

I'm debating whether or not to use foam for the hands or pep them, what do you guys think?

Well i used foam for one but when i closed my hand teared a bit in both sides of the palm, so im pepping one now

made007 said:

---

Well i used foam for one but when i closed my hand teared a bit in both sides of the palm, so im pepping one now

I'm actually building a foam one now im not too sure how i feel about it yet. I did pep one and I liked it but i was worried about being about to do anything with my hands at all because of it.