JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread

Finhead · 11-04-2011, 02:00 AM

Cool thanks just a base to start is great.

SemperBourne · 11-04-2011, 02:04 AM

Quote:

Originally Posted by STEALTH

The chest looks great and you did a good job on the helmet considering it's foam
but I'm not a big fan of the foam helmets for myself.

I believe at least the helmet should be finished in some kind of resin and sanded with filler.

It's the focal point of the build where everyone will look at first. You'd want it looking as real/sharp as possible.

That being said, if you have no interest in sanding and all that fuss then keep building and going till the finish.

Ill think about doing that later. I resined and fiberglassed it before but it did not turn out the way I wanted it to..Plus it was way too big..thats why I switched to foam..I saw your vids and I liked the way your iron man was turning out so I just started foaming. But I might do it again. Helmets turn out kinda boxy in foam

JaggerWolf · 11-27-2011, 10:23 AM

I saw in a few of these posts that it was scaled up for a few people - is there a link to the scaled up version? I am 6'1" - 230lbs and would love to start on this next since im almost finished with my Mark VI foam build - any help with the scaling would be awesome thanks!

Bamabat · 11-27-2011, 11:47 AM

Let the download begin! Thanks

Bamabat

j0wE · 11-27-2011, 01:14 PM

here's the chest:

WM_CHEST_FOAM_SCALED.pdo - 4shared.com - online file sharing and storage - download

and back

WM_BACK_FOAM_SCALED.pdo - 4shared.com - online file sharing and storage - download

JaggerWolf · 11-27-2011, 04:04 PM

Thanks that gets me started

buskerj · 11-28-2011, 05:45 PM

I'm currently working on Robo3687's, only the chest piece so far, and really looking forward to this one after im done. Thanks guys.

JaggerWolf · 11-28-2011, 10:58 PM

Do I just do the same scaling for the rest of the pieces as whats set for the chest and back? Wasn't sure if the same scaling would work for all the files.

j0wE · 11-28-2011, 11:05 PM

the scale on the rest of the pieces should probably be ok, unless you have very large arms or legs, try building a bicep then see where to go from there, the biceps are pretty large

JaggerWolf · 11-29-2011, 02:02 PM

Ok cool, just wasn't sure about the waist or length of the leg sections meeting up. Will be starting this in the next week as soon as I finish strapping the Mark VI and painting it.

breakpoint · 01-23-2012, 01:43 PM

Quote:

Originally Posted by STEALTH

Hey Clinton
the scale is around 1.8 default. I think that was for someone 5'6-5'9 from the early testing days for the upper half, but the legs were for someone 5' 10 ish.
you'll have to play around with that as the suit was modelled from the action figure with not the most realistic proportions.

Hi,

first of all Thx to all the people who made these files, stealth, j0we, juice ect u did a great job.
Now to the scaling, Im doing this suit for a friend who is 180 cm .5'9 I think and 80 kgs 175lbs I think.. hes "normal" build .. not fat nor thin. Could I use these in normal scale the come with or would I have to rescale any bits u think?

Thanks in advance for any replies

/danny

j0wE · 01-23-2012, 02:22 PM

I think the default scale will work for him. I have found that the files are too small for me but I'm significantly taller and bigger.

Max Jenius · 01-23-2012, 06:20 PM

Those look great. Thanks for sharing!

msleeper · 02-03-2012, 08:15 PM

I noticed that the War Machine set is missing elbows, and the bicep does not connect to the forearm in any way.

There also is not a file for the guns on War Machine's arms (which should connect to where the big flat area is). Any plans to release foam-friendly templates for the guns?

Drakon · 02-04-2012, 02:35 PM

Quote:

Originally Posted by msleeper

I noticed that the War Machine set is missing elbows, and the bicep does not connect to the forearm in any way.

There also is not a file for the guns on War Machine's arms (which should connect to where the big flat area is). Any plans to release foam-friendly templates for the guns?

Hmmm I don't know about the guns. But I have seen someone use the IM MVI forearms as a base. Then putting the WM gauntlets over them. This little step solves the elbow issue. Because the WM bicep does have a tab for attaching the elbow. Hope this helps. If I can find the thread I saw it in I will post it.

msleeper · 02-04-2012, 03:07 PM

That's what I did on mine as well. I used the elbow and rear 1/4 of the IM elbow and forearm. Looking at references, there doesn't seem to be a lot of difference between WM's and IM's elbows.

I found a high detail paper version of the arm guns and I converted it to a foam template. It's not great though, the gun needs to be remodeled with foam in mind since it has some weird geometry to it and you need to constantly look at the file on your computer to make sense of it.

j0wE · 02-05-2012, 10:38 AM

The elbows are the same. try this file.

WM_elbow_foam.pdo - 4shared.com - online file sharing and storage - download

msleeper · 02-05-2012, 01:45 PM

Thanks! I assumed they were nearly identical enough that they could be interchangeable. I was just surprised they weren't included in the pack of files. If you get the foam IM and the foam WM files together you can find any missing pieces.

Anyway, thanks again.

msleeper · 02-07-2012, 04:42 PM

Another question - I'm looking for the high detail 3D model, I think it was extracted from the Iron Man 2 game. I'm not looking for the high detail pepakura files, but rather the original 3D model itself. I would like to use it for reference material on certain areas of the War Machine armor.

Anyone who has it or knows where to find it, please either post it here or PM me if you need to. Thanks!

Joshturismo · 03-23-2012, 02:23 PM

just want to say thanks!!! to stealth, j0we, juice ect...for sharing the files if it wasn't for them i couldn't make the suit
Not the best work like i've seen all over this forum but heres my IM2 WM suit out of foam using pepakura files gatling gun was freehanded.

darkside501st · 03-24-2012, 02:02 PM

I like it... it looks pretty cool! good work.

inventorj · 03-24-2012, 02:25 PM

that is one sweet suit my friend.

Joshturismo · 03-24-2012, 02:41 PM

Quote:

Originally Posted by ;2188170

I like it... it looks pretty cool! good work.

thanks darkside501st can't wait till your MKvii pep files are finished!

Quote:

Originally Posted by inventorj

that is one sweet suit my friend.

thanks! not the best...haha i wish it was the real thing!

msleeper · 03-24-2012, 03:41 PM

How tall are you, and did you have to scale the files?

Joshturismo · 03-24-2012, 03:51 PM

Quote:

Originally Posted by msleeper

How tall are you, and did you have to scale the files?

I'm about 5'7". Yea I had to scale the legs and shins and abs.

		Replica Props	Screen Used Props	Replica Costumes	Sculpture and Makeup	General Modeling	Studio Scale Models	Movie Discussion
	Collaborate, create, and collect at the internet's largest community dedicated to props, costumes and models.

11-04-2011, 02:00 AM	#126
Finhead Join Date: Jan 2010 Posts: 1,397	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread Cool thanks just a base to start is great.

11-27-2011, 10:23 AM	#128
JaggerWolf Join Date: Aug 2011 Posts: 41	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread I saw in a few of these posts that it was scaled up for a few people - is there a link to the scaled up version? I am 6'1" - 230lbs and would love to start on this next since im almost finished with my Mark VI foam build - any help with the scaling would be awesome thanks!

11-27-2011, 11:47 AM	#129
Bamabat Join Date: Nov 2011 Location: Sharpsburg, Ga Posts: 28	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread Let the download begin! Thanks Bamabat

11-27-2011, 01:14 PM	#130
j0wE Join Date: Jun 2011 Location: El Paso, Texas Posts: 445	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread here's the chest: WM_CHEST_FOAM_SCALED.pdo - 4shared.com - online file sharing and storage - download and back WM_BACK_FOAM_SCALED.pdo - 4shared.com - online file sharing and storage - download

( Don't want to see advertising between posts? Register for free and become a member of our community! )
RPF Sponsors

11-27-2011, 04:04 PM	#131
JaggerWolf Join Date: Aug 2011 Posts: 41	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread Thanks that gets me started

11-28-2011, 05:45 PM	#132
buskerj Join Date: May 2011 Posts: 7	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread I'm currently working on Robo3687's, only the chest piece so far, and really looking forward to this one after im done. Thanks guys.

11-28-2011, 10:58 PM	#133
JaggerWolf Join Date: Aug 2011 Posts: 41	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread Do I just do the same scaling for the rest of the pieces as whats set for the chest and back? Wasn't sure if the same scaling would work for all the files.

11-28-2011, 11:05 PM	#134
j0wE Join Date: Jun 2011 Location: El Paso, Texas Posts: 445	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread the scale on the rest of the pieces should probably be ok, unless you have very large arms or legs, try building a bicep then see where to go from there, the biceps are pretty large

11-29-2011, 02:02 PM	#135
JaggerWolf Join Date: Aug 2011 Posts: 41	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread Ok cool, just wasn't sure about the waist or length of the leg sections meeting up. Will be starting this in the next week as soon as I finish strapping the Mark VI and painting it.

01-23-2012, 02:22 PM	#137
j0wE Join Date: Jun 2011 Location: El Paso, Texas Posts: 445	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread I think the default scale will work for him. I have found that the files are too small for me but I'm significantly taller and bigger.

01-23-2012, 06:20 PM	#138
Max Jenius pack rat blues Join Date: Jun 2005 Posts: 218	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread Those look great. Thanks for sharing!

02-03-2012, 08:15 PM	#139
msleeper Join Date: Jan 2012 Location: Atlanta, Jawjuh Posts: 106	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread I noticed that the War Machine set is missing elbows, and the bicep does not connect to the forearm in any way. There also is not a file for the guns on War Machine's arms (which should connect to where the big flat area is). Any plans to release foam-friendly templates for the guns?

02-04-2012, 03:07 PM	#141
msleeper Join Date: Jan 2012 Location: Atlanta, Jawjuh Posts: 106	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread That's what I did on mine as well. I used the elbow and rear 1/4 of the IM elbow and forearm. Looking at references, there doesn't seem to be a lot of difference between WM's and IM's elbows. I found a high detail paper version of the arm guns and I converted it to a foam template. It's not great though, the gun needs to be remodeled with foam in mind since it has some weird geometry to it and you need to constantly look at the file on your computer to make sense of it.

02-05-2012, 10:38 AM	#142
j0wE Join Date: Jun 2011 Location: El Paso, Texas Posts: 445	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread The elbows are the same. try this file. WM_elbow_foam.pdo - 4shared.com - online file sharing and storage - download

02-05-2012, 01:45 PM	#143
msleeper Join Date: Jan 2012 Location: Atlanta, Jawjuh Posts: 106	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread Thanks! I assumed they were nearly identical enough that they could be interchangeable. I was just surprised they weren't included in the pack of files. If you get the foam IM and the foam WM files together you can find any missing pieces. Anyway, thanks again.

02-07-2012, 04:42 PM	#144
msleeper Join Date: Jan 2012 Location: Atlanta, Jawjuh Posts: 106	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread Another question - I'm looking for the high detail 3D model, I think it was extracted from the Iron Man 2 game. I'm not looking for the high detail pepakura files, but rather the original 3D model itself. I would like to use it for reference material on certain areas of the War Machine armor. Anyone who has it or knows where to find it, please either post it here or PM me if you need to. Thanks!

03-23-2012, 02:23 PM	#145
Joshturismo Join Date: Mar 2012 Posts: 22	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread just want to say thanks!!! to stealth, j0we, juice ect...for sharing the files if it wasn't for them i couldn't make the suit Not the best work like i've seen all over this forum but heres my IM2 WM suit out of foam using pepakura files gatling gun was freehanded. Last edited by Joshturismo; 03-23-2012 at 08:41 PM.

03-24-2012, 02:02 PM	#146
darkside501st Join Date: Apr 2010 Location: Houston, TX Posts: 349	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread I like it... it looks pretty cool! good work.

03-24-2012, 02:25 PM	#147
inventorj Join Date: Aug 2011 Posts: 20	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread that is one sweet suit my friend.

03-24-2012, 03:41 PM	#149
msleeper Join Date: Jan 2012 Location: Atlanta, Jawjuh Posts: 106	Re: JUICE's WAR MACHINE - Pepakura FOAM Template Files Thread How tall are you, and did you have to scale the files?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
War Machine High-Def Pepakura Team-up	Zabana	Replica Movie Costumes	43	05-13-2012 03:55 PM
Dancin_Fool IRON MAN Mark III - Pepakura FOAM Template files	STEALTH	Replica Movie Costumes	7	03-23-2012 04:36 AM
War Machine, my first Pepakura project...	GordonTarpley	Replica Movie Costumes	39	11-30-2011 12:06 AM
HD War Machine Helmet Pepakura File?	Darkside Yautja	Replica Movie Costumes	6	03-15-2011 07:42 PM