IRON MAN MARK III build... Unibeam Fun at Avengers IMAX Premier ! pg.36

Surreal Studios · 09-14-2010, 12:22 AM

Quote:

Originally Posted by quovadis0920

hey kagn is the neck seal with the spine pieces a separate pep file or did you improvise it as well?

I sculpted it on the back out of clay and then made a mold of the entire neck

xpst500 · 09-14-2010, 02:56 AM

Looking good.

quovadis0920 · 09-14-2010, 06:13 AM

ahh..i thought it was a pep file as well.. starting to drool on your work man

thire · 09-14-2010, 08:58 AM

Simply amazing!

Surreal Studios · 09-14-2010, 09:39 AM

Hey folks, I have been asked alot lately where I got my files from so i am going to post links to them for you all

Dancin_fools files (upperbody)
http://www.therpf.com/f24/looking-da...ra-file-92123/

Robo's files
http://www.therpf.com/f24/robo3687s-...ge-52-a-88147/

Also vshore100 linked on last page mark 3 leg files, these are also the ones i will be using, the rest abs, codpiece, spine, hands and feet I will be using robo's files

http://www.4shared.com/file/ohJ13mZi...banarearr.html

http://www.4shared.com/file/rwazAABI...ntorrilla.html

Leander · 09-14-2010, 09:54 AM

Good resources!!

However, Robo's are Mark 4 and 6 though, not mark 3.
People tend to mess them up (including myself)

Here are all the Marks listed:
Mark 1, metal prototype Tony creates in the desert.
Mark 2, the first "real looking" Ironman, unpainted (he only testflies it)
Mark 3, The Gold/Red suit from the Ironman 1 movie which gets destroyed in the last fight with Iron Mongel.
Mark 4, The 1st Gold/Red suit in Ironman 2 which looks a lot like Mark 3 but small differences in the Abs-plate and I believe legs,
Mark 5, is know as the travel suit, Red/Silver and unfolds from a briefcase
Mark 6, is the one with the Triangled Arc reactor in the chestplate.

So Kagn be carefull with using Robo's Abs and legs files since they are not Mark 3 (maybe some other files aswell).

And for everyone else I hope this clears things up. especially mark 3 and 4 took me a while to see the differences. I suggest to take a good look at them if you make either a Mark 3 or Mark 4 suit so it wont get a blend between those 2

Surreal Studios · 09-14-2010, 11:09 AM

Quote:

Originally Posted by Leander

Good resources!!

However, Robo's are Mark 4 and 6 though, not mark 3.
People tend to mess them up (including myself)

Here are all the Marks listed:
Mark 1, metal prototype Tony creates in the desert.
Mark 2, the first "real looking" Ironman, unpainted (he only testflies it)
Mark 3, The Gold/Red suit from the Ironman 1 movie which gets destroyed in the last fight with Iron Mongel.
Mark 4, The 1st Gold/Red suit in Ironman 2 which looks a lot like Mark 3 but small differences in the Abs-plate and I believe legs,
Mark 5, is know as the travel suit, Red/Silver and unfolds from a briefcase
Mark 6, is the one with the Triangled Arc reactor in the chestplate.

So Kagn be carefull with using Robo's Abs and legs files since they are not Mark 3 (maybe some other files aswell).

And for everyone else I hope this clears things up. especially mark 3 and 4 took me a while to see the differences. I suggest to take a good look at them if you make either a Mark 3 or Mark 4 suit so it wont get a blend between those 2

Very good point Leander and yes i am aware of the differences, but the pieces from robo i am thinking of using abs, cod, spine, hands and feet are not too different from the mark 3, and any differences can be fixed in the filler/detail stage, but I have also spoke with Dancin_fool and he will be finishing the rest of his suit files after his wedding in October i believe, so chances are i will not be on the lower half of the suit by then, so i will be using those files if they are out

Bimmer · 09-14-2010, 08:10 PM

Kagn, don't know if you've seen my unfold on the mk 3 abs, but here is the link

Iron Man Medium Detail Ab Plate - Fixed by Juice Unfolded by Dubean33.pdo - 4shared.com - online file sharing and storage - download

Surreal Studios · 09-14-2010, 11:15 PM

Thanks Bimmer I had not come across those files, i like how the spine is included aswell, this will save me alot of custom detail work in the filler stage

Bimmer · 09-15-2010, 12:07 AM

no problem. It doesn't match up SUPER well with dancin_fools chest/back and cod piece, but with some modifications i'm sure you'll get it to work perfect. Its the same file Finhead used if you saw his build

Surreal Studios · 09-15-2010, 09:08 AM

Quote:

Originally Posted by Bimmer

no problem. It doesn't match up SUPER well with dancin_fools chest/back and cod piece, but with some modifications i'm sure you'll get it to work perfect. Its the same file Finhead used if you saw his build

Thats good to know, was wondering what ab file he used, seeing that the link in his thread to the files is down. Ya that was a amazing build I can only hope my will turn out as good.

Bimmer · 09-15-2010, 11:24 AM

well you're doing amazing work too bud. Just don't stop half way through and leave us wondering if you ever finished it

Surreal Studios · 09-15-2010, 01:07 PM

Dont worry this is a start to finish build, but each piece will take a lil longer to complete because i am molding each one

Maulfett · 09-17-2010, 03:39 PM

Quote:

Originally Posted by kagn

Dont worry this is a start to finish build, but each piece will take a lil longer to complete because i am molding each one

wao, it will take long time but keep it up i want to see more updates.

Surreal Studios · 09-17-2010, 11:07 PM

Quote:

Originally Posted by Maulfett

wao, it will take long time but keep it up i want to see more updates.

Thanks maul, cant wait to see your paint job on your suit!

007halu · 09-18-2010, 12:18 AM

any updates so far?

Surreal Studios · 09-18-2010, 10:31 PM

Quote:

Originally Posted by 007halu

any updates so far?

Well no pics yet anyways, what I can tell you, so far I have molded the chest piece, still have to make the mother mold yet, and i am in the process of detailing the back armor. Should have some pics up this week hopefully

Zenman · 09-18-2010, 11:09 PM

Quote:

Originally Posted by kagn

Well no pics yet anyways, what I can tell you, so far I have molded the chest piece, still have to make the mother mold yet, and i am in the process of detailing the back armor. Should have some pics up this week hopefully

Just wanted to say great looking work! Keep it up

Bimmer · 09-19-2010, 03:09 AM

i'd be okay with more pics of what you already have done

i just love looking at clean crisp pieces of iron man armor

hahha just a thought.

Cant wait to see new stuff too

kklloo · 09-19-2010, 11:02 AM

I love the build so far, looking forward to more progress pics.

Surreal Studios · 09-19-2010, 01:28 PM

You guys are really motivating me, lol. Pics will be on the way, working on getting the back detailed, also i am making the flaps that go on the back seperate so that they can be funtional

MxRacer476 · 09-19-2010, 08:53 PM

Your suit is coming together VERY nice Kagn....Lookin forward to further updates

Surreal Studios · 09-21-2010, 12:42 PM

Hey guys i forgot to post pics of what i used for the small pieces that go into the rib slots, in every photo i have seen the parts are never quite the same, so i found something that had a simular look to what i had seen. the chest is in the mold right now.

Bigmac · 09-21-2010, 08:46 PM

wow

that a nice chest piece

quovadis0920 · 09-22-2010, 07:50 AM

where did you get the pieces? looks perfectly like the chest armor in the movie dude!

		Replica Props	Screen Used Props	Replica Costumes	Sculpture and Makeup	General Modeling	Studio Scale Models	Movie Discussion
	Collaborate, create, and collect at the internet's largest community dedicated to props, costumes and models.

09-14-2010, 02:56 AM	#52
xpst500 Join Date: May 2010 Posts: 24	Re: ironman mark 3 entire suit build....New Neck Plating and Chest pg.2 Looking good.

09-14-2010, 06:13 AM	#53
quovadis0920 Join Date: Jun 2010 Location: Tarlac,Philippines Posts: 356	Re: ironman mark 3 entire suit build....New Neck Plating and Chest pg.2 ahh..i thought it was a pep file as well.. starting to drool on your work man

09-14-2010, 08:58 AM	#54
thire Join Date: Sep 2010 Posts: 47	Re: ironman mark 3 entire suit build....New Neck Plating and Chest pg.2 Simply amazing!

09-14-2010, 09:39 AM	#55
Surreal Studios Formerly kagn Join Date: Jun 2010 Location: Ontario Canada Posts: 675	Re: ironman mark 3 entire suit build....New Neck Plating and Chest pg.2 Hey folks, I have been asked alot lately where I got my files from so i am going to post links to them for you all Dancin_fools files (upperbody) http://www.therpf.com/f24/looking-da...ra-file-92123/ Robo's files http://www.therpf.com/f24/robo3687s-...ge-52-a-88147/ Also vshore100 linked on last page mark 3 leg files, these are also the ones i will be using, the rest abs, codpiece, spine, hands and feet I will be using robo's files http://www.4shared.com/file/ohJ13mZi...banarearr.html http://www.4shared.com/file/rwazAABI...ntorrilla.html Last edited by Surreal Studios; 09-14-2010 at 09:51 AM.

( Don't want to see advertising between posts? Register for free and become a member of our community! )
RPF Sponsors

09-14-2010, 09:54 AM	#56
Leander Join Date: Jun 2010 Location: Netherlands Posts: 183	Re: ironman mark 3 entire suit build....New Neck Plating and Chest pg.2 Good resources!! However, Robo's are Mark 4 and 6 though, not mark 3. People tend to mess them up (including myself) Here are all the Marks listed: Mark 1, metal prototype Tony creates in the desert. Mark 2, the first "real looking" Ironman, unpainted (he only testflies it) Mark 3, The Gold/Red suit from the Ironman 1 movie which gets destroyed in the last fight with Iron Mongel. Mark 4, The 1st Gold/Red suit in Ironman 2 which looks a lot like Mark 3 but small differences in the Abs-plate and I believe legs, Mark 5, is know as the travel suit, Red/Silver and unfolds from a briefcase Mark 6, is the one with the Triangled Arc reactor in the chestplate. So Kagn be carefull with using Robo's Abs and legs files since they are not Mark 3 (maybe some other files aswell). And for everyone else I hope this clears things up. especially mark 3 and 4 took me a while to see the differences. I suggest to take a good look at them if you make either a Mark 3 or Mark 4 suit so it wont get a blend between those 2

09-14-2010, 08:10 PM	#58
Bimmer Join Date: Apr 2010 Location: Provo, UT Posts: 437	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 Kagn, don't know if you've seen my unfold on the mk 3 abs, but here is the link Iron Man Medium Detail Ab Plate - Fixed by Juice Unfolded by Dubean33.pdo - 4shared.com - online file sharing and storage - download

09-14-2010, 11:15 PM	#59
Surreal Studios Formerly kagn Join Date: Jun 2010 Location: Ontario Canada Posts: 675	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 Thanks Bimmer I had not come across those files, i like how the spine is included aswell, this will save me alot of custom detail work in the filler stage

09-15-2010, 12:07 AM	#60
Bimmer Join Date: Apr 2010 Location: Provo, UT Posts: 437	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 no problem. It doesn't match up SUPER well with dancin_fools chest/back and cod piece, but with some modifications i'm sure you'll get it to work perfect. Its the same file Finhead used if you saw his build

09-15-2010, 11:24 AM	#62
Bimmer Join Date: Apr 2010 Location: Provo, UT Posts: 437	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 well you're doing amazing work too bud. Just don't stop half way through and leave us wondering if you ever finished it

09-15-2010, 01:07 PM	#63
Surreal Studios Formerly kagn Join Date: Jun 2010 Location: Ontario Canada Posts: 675	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 Dont worry this is a start to finish build, but each piece will take a lil longer to complete because i am molding each one

09-18-2010, 12:18 AM	#66
007halu Join Date: Jun 2010 Posts: 47	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 any updates so far?

09-19-2010, 03:09 AM	#69
Bimmer Join Date: Apr 2010 Location: Provo, UT Posts: 437	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 i'd be okay with more pics of what you already have done i just love looking at clean crisp pieces of iron man armor hahha just a thought. Cant wait to see new stuff too

09-19-2010, 11:02 AM	#70
kklloo Join Date: May 2010 Posts: 34	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 I love the build so far, looking forward to more progress pics.

09-19-2010, 01:28 PM	#71
Surreal Studios Formerly kagn Join Date: Jun 2010 Location: Ontario Canada Posts: 675	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 You guys are really motivating me, lol. Pics will be on the way, working on getting the back detailed, also i am making the flaps that go on the back seperate so that they can be funtional

09-19-2010, 08:53 PM	#72
MxRacer476 Join Date: Jun 2010 Location: Georgetown, IL Posts: 7	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 Your suit is coming together VERY nice Kagn....Lookin forward to further updates

09-21-2010, 12:42 PM	#73
Surreal Studios Formerly kagn Join Date: Jun 2010 Location: Ontario Canada Posts: 675	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 Hey guys i forgot to post pics of what i used for the small pieces that go into the rib slots, in every photo i have seen the parts are never quite the same, so i found something that had a simular look to what i had seen. the chest is in the mold right now.

09-21-2010, 08:46 PM	#74
Bigmac Join Date: Aug 2010 Location: Australia Posts: 40	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 wow that a nice chest piece

09-22-2010, 07:50 AM	#75
quovadis0920 Join Date: Jun 2010 Location: Tarlac,Philippines Posts: 356	Re: IRONMAN MARK 3 ENTIRE SUIT BUILD....New Neck Plating and Chest pg.2 where did you get the pieces? looks perfectly like the chest armor in the movie dude!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CP66's Iron Man Mark III Build on a Budget	CyberPaddy66	Replica Movie Costumes	30	01-22-2012 01:43 AM
Iron Man Mark III suit (Ohio) suit with sound!	Neo2345	Replica Movie Costumes	80	07-10-2011 08:13 AM
IRON MAN - MARK III - 2nd Build (New pics!)	Joshalots	Replica Movie Costumes	9	03-17-2011 05:10 PM
New to this. How do I build an Iron Man Mark III suit???	comonbub	Replica Movie Costumes	7	12-16-2010 07:33 PM