DEAD SPACE Isaac Clarke Level 3 Suit SKS Props
- Thread starter SKS Props
- Start date
-
- Tags
- dead space
SlimeTime13
Well-Known Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/18/14
This just keeps getting better and better!
This just keeps getting better and better!
SKS Props
Sr Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/18/14
Iconic right arm armor - I started this build by cutting out and heat forming some thick styrene. Then curled the edges using a guide to match the in game look.
Then I attached 1/2" mat foam to the styrene to bulk it up. After some time with my belt sander I got the basic shape roughed out and some damage detials added.
First coat of paint. I ran out of the copper so I'm not going to be able to finish these yet.
But a pretty damn good start!!
Iconic right arm armor - I started this build by cutting out and heat forming some thick styrene. Then curled the edges using a guide to match the in game look.
Then I attached 1/2" mat foam to the styrene to bulk it up. After some time with my belt sander I got the basic shape roughed out and some damage detials added.
First coat of paint. I ran out of the copper so I'm not going to be able to finish these yet.
But a pretty damn good start!!
The Schlitzie
Sr Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/18/14
That is coming out so freaking good!
What are you using to cut the styrene? I've only worked with it a bit and I just cut it enough to score it and snap it. But that was thinner stuff too.
That is coming out so freaking good!
What are you using to cut the styrene? I've only worked with it a bit and I just cut it enough to score it and snap it. But that was thinner stuff too.
SlimeTime13
Well-Known Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/18/14
DANG
DANG
SKS Props
Sr Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/18/14
The stuff I used for the upper arm armor is about 1/4" thick and is probably more like wonderflex than styrene. Because of the tickness I just keep scoring till I go through then clean it up on my sander or with a Dremel.
The stuff I used for the upper arm armor is about 1/4" thick and is probably more like wonderflex than styrene. Because of the tickness I just keep scoring till I go through then clean it up on my sander or with a Dremel.
SKS Props
Sr Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/18/14
I have had several people ask me on here and Facebook where I downloaded my template files from. Well, I don't have any files to download because I do everything "old school". I play the game, take screen shots off of my TV with a camera, and sketch everything out on newsprint paper to scale. Then when I think I'm pretty close I transfer it to whatever medium I plan on using. I still haven't learned how to do any of the pep file stuff yet. Pep files would have made it a lot easier but there is something to be said about making it from scratch.
I have had several people ask me on here and Facebook where I downloaded my template files from. Well, I don't have any files to download because I do everything "old school". I play the game, take screen shots off of my TV with a camera, and sketch everything out on newsprint paper to scale. Then when I think I'm pretty close I transfer it to whatever medium I plan on using. I still haven't learned how to do any of the pep file stuff yet. Pep files would have made it a lot easier but there is something to be said about making it from scratch.
SKS Props
Sr Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/18/14
Well it hit me today that between my actual job,filling Borderlands mask orders, and finishing the Dead Space costume I am going to be cutting it very close for comicon in March. So to try and speed things up I am going to mod a Nerf gun instead of building my plasma cutter from scratch. I don't really like doing this because I want it as accurate as possible. I might have to make one down the road but this will do for now. So here is the start of the plasma cutter build.
I took apart a maverick that I had laying aaround.
Next I cut out the blades for the front of the gun
Starting to take shape
Well it hit me today that between my actual job,filling Borderlands mask orders, and finishing the Dead Space costume I am going to be cutting it very close for comicon in March. So to try and speed things up I am going to mod a Nerf gun instead of building my plasma cutter from scratch. I don't really like doing this because I want it as accurate as possible. I might have to make one down the road but this will do for now. So here is the start of the plasma cutter build.
I took apart a maverick that I had laying aaround.
Next I cut out the blades for the front of the gun
Starting to take shape
SlimeTime13
Well-Known Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/19/14
I made my Plasma Cutter out of a nerf gun too. looks great!!
I made my Plasma Cutter out of a nerf gun too. looks great!!
Rysjin7717
Well-Known Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/19/14
Good call on using that thicker styrene what thickness did you use?
Looks great so far it should work in a pinch this is coming together really well.
Keep up the great work Bro.opcorn
Good call on using that thicker styrene what thickness did you use?
Looks great so far it should work in a pinch this is coming together really well.
Keep up the great work Bro.
opcorn
SKS Props
Sr Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/19/14
The blades and support are 1/4" the deatils pieces (you can't see yet because of them all blending in" are much thinner from a variety pack of styrene.
Good call on using that thicker styrene what thickness did you use?
Looks great so far it should work in a pinch this is coming together really well.
Keep up the great work Bro.
The blades and support are 1/4" the deatils pieces (you can't see yet because of them all blending in" are much thinner from a variety pack of styrene.
quixotic5891
Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/19/14
The foam and styrene together is a great idea. Adds some depth and some structure. Wish I would have used that idea on my build.
The foam and styrene together is a great idea. Adds some depth and some structure. Wish I would have used that idea on my build.
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/19/14
Very very cool man, Love the progress and how quick it is too! Quick question, you said heat blast the foam to toughen it? I have never used foam but plan to soon for chest armor so that just caught my eye.
Very very cool man, Love the progress and how quick it is too! Quick question, you said heat blast the foam to toughen it? I have never used foam but plan to soon for chest armor so that just caught my eye.
SKS Props
Sr Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/19/14
I don't know if any of the foam pros heat seal it or not. But before I brush it with mod podge I like to heat it up and then sand it a little bit. Although I will admit I don't use foam very often. I like my armor props to stay rigid so I like to use styrene and wonderflex
I don't know if any of the foam pros heat seal it or not. But before I brush it with mod podge I like to heat it up and then sand it a little bit. Although I will admit I don't use foam very often. I like my armor props to stay rigid so I like to use styrene and wonderflex
SKS Props
Sr Member
Re: DEAD SPACE Issac Clarke Level 3 Suit - Updated 1/19/14
Plasma Cutter update
I made the detail piece that goes underneath the pistol grip. This is made up of a mixture of found items, styrene, and MDF that has been cut and sanded.
I fabricated the piece with the 3 holes to house the LED lights. It detaches from the body of the gun so you can replace the batteries.
Here is a pic of the gun about 90% complete.
Plasma Cutter update
I made the detail piece that goes underneath the pistol grip. This is made up of a mixture of found items, styrene, and MDF that has been cut and sanded.
I fabricated the piece with the 3 holes to house the LED lights. It detaches from the body of the gun so you can replace the batteries.
Here is a pic of the gun about 90% complete.
Similar threads
