38" SUPER STAR DESTROYER 'Executor'

omes72 · 01-15-2010, 02:44 PM

Hi everyone. this was my first resin kit. A good size to kick off. i saw Lee Fury's lit one & had to have it. i was fortunate to find it on ebay. I was stoked. I had never done lighting before so had no idea what I was doing really. Over the last year being on the boards I have learnt all the skills from all the fantastic people I have been fortunate to meet. Attached are some of the build pictures from along my journey into resin kits with lighting. I am still new to this hobby/art & still have much to learn. I thank everyone for their guidance & support. i hope to have this model finished by July this year. I have only just learnt how to do LED lighting & Fibre Optics. Alot of resin had to be removed to allow for lighting of this model & alot of fibre will be used to light it. Unfortunately this one of the last kits cast & there are quite alot of pits, micro bubbles & bits the resin didn't get into on the buildings. These won't show up too much though can be seen in some of the beginning close ups. A great kit though & has been a challenging learning curb.
The full build can be viewed here
http://www.studioscalemodelers.com/f...?tid=48&page=1

Hebinator · 01-15-2010, 10:26 PM

Every time I see this kit I wanna build it. As soon as I get some of my other projects out of the way I am definately going to give this a shot. Your progress is looking great!

omes72 · 01-17-2010, 01:02 AM

Get the new kit when its finished, 6ft! Bigger is better, Thanks.

Hebinator · 01-17-2010, 01:52 AM

Man, 6ft of awesome......sounds like something that I need in my house. Do you think my wife would notice?

omes72 · 01-17-2010, 04:51 AM

Just say its a new dining table...

ok so some more drilling & threading. Broke aboy 8 drill pieces today as when I hit thick spots the drill piece just gets bogged & snaps

Got the LED's for the engines wired up & couldn't help but do a light test. Am way ahead of myself as I need to strip the primer as its flaking off. Some idiot didn't wash the pieces properly

I will also need to install all the fibre optics before putting the lights in the engines. Its going to be quite busy inside this mother. Sorta get the idea of what will be. I thank & curse Lee Fury for doing this to me. Without wanting to do what he did this would not be happenning

yuumi2891103 · 01-18-2010, 12:38 AM

Woow! that's A great build

Nice and precise detail !

May I ask, the last few photos in a first post, You taped some bunch
of optic fiber together after stick out through the halls. What is that for ?

It's going to be a really 'Heavy' model

.

Cheers

katsu from Japan,

GCLAMBERT89 · 01-18-2010, 12:45 AM

thats sick! I saw a model kit very much like this one on ebay a few months ago. I was very eagered to get it but i held back. I wish now that i had bought it.

omes72 · 01-18-2010, 01:09 AM

Thanks everyone. This kit is offered here by this guy here be quick only a couple left.
http://www.therpf.com/f11/korbanth-38-super-star-destroyer-model-74809/
Theres a couple left so be quick. Its been remoulded & cast & is well worth the money. If you want to light it be ready for the work. The top picture of the fibre optic is where Ive threaded fibre optic through building pieces & secured it with tape as I have not yet glued/attached the fibre yet. Just checking whats best for that task.

omes72 · 01-31-2010, 08:37 PM

Well its my first day off in 8years that I haven't one or two kids with me With my son now in Prep(first year). Theyre both at school. Sort of sad really but now I got one day to build, walk, go to the beach with the dogs or whatever So back to this time consuming fibre optic LED eating monster I started. Ive spent the morning (3hours) threading the last of my 500ft of fibre optic & just made it to the finish line on my 3rd piece. Yep 3rd piece! Theres 500ft of fo on 3 pieces. Guess I'll be placing an order. Lucky I gave up drinking So this is it my 3rd piece of threaded fo building with a quick light test to keep myself & everyone else amused & interested Still got plenty to thread & theyre just the add on sections..........

bigbluejavelin · 02-02-2010, 05:41 AM

Thanks for posting this thread, I should be getting my 38" SSD tomorrow, so I will be following this one closely. I'm guessing you are using .25mm optic strands? Are you planning on using all the same size, or are you going to toss in a few different sizes to break it up a bit? How about color of the LEDs? I'm thinking about using a mix of white and "warm white" with maybe a few random blues and reds and yellows sparsely spread about.

omes72 · 02-05-2010, 02:30 PM

Thanks. Yep 0.25mm fibre optic. You'll need atleast 2000ft of it also if you want to light this bad boy up well. Your lighting idea sound good. Im just going to stick with the blue but have a couple of red here & there. Its alot of work but am sure its going to be worth it once its done.

bigbluejavelin · 02-05-2010, 07:20 PM

Yep, got it Wed, and every time I look at it I feel all warm an fuzzy! If I hadn't discovered this forum, I would have missed out on what promises to be the most awesome build.

Korbanth · 02-19-2010, 12:00 AM

Glad it arrived...I have one more left and wont have any more of these 38" Super Star Destroyer models in case anyone else wants one, send me an email - rlj41@cox.net

Quote:

Originally Posted by bigbluejavelin

Yep, got it Wed, and every time I look at it I feel all warm an fuzzy! If I hadn't discovered this forum, I would have missed out on what promises to be the most awesome build.

rgjacket · 06-29-2011, 02:23 PM

just got a 38inch super star destroyer today and hope to light it as you have done.
where do you get the drill bits from?

as for lighting did you use lots of led light inside or a fluorescent tube arangement?

any help would be great as this is the 1st time ive done one on this scale.

apokai · 06-29-2011, 10:04 PM

Hey rgjacket,

I received mine too! I got fiber and drill bits on ebay. Did not start it yet. Searching for a used press drill to help me out. The skinning-off part of the model is scarring me a little though.

Noumcea · 06-30-2011, 04:09 AM

Fellow Aussie,

The build is looking most excellent. Over 2000 feet of FO, I am impressed.

Will you have some update pics soon as the last were a fair while ago.

I live about 6 hrs from the Gold Coast so next time I head up that way, mind if I drop in for a look see at all of your work and maybe have a few brewski's ?

Cheers.

Dave.

rgjacket · 06-30-2011, 08:09 AM

Cheers Apoaki E bay here i come !

rgjacket · 07-17-2011, 09:55 AM

has any one tryed useing Cold Cathode 12" Tubes to light the inside of this or any other model then use fiber optics to direct the light out?

ColdCath12 Blue 12 Cold Cathode - Fiber Optic Products, Inc.

will this work? as im rubbish at electrics and wireing.

apokai · 07-28-2011, 08:02 AM

Seems a little bit complicated for the result.

The Batfan · 07-28-2011, 02:15 PM

WOW this will be just Stellar when finished cant wait to see the end results

Korbanth · 12-05-2011, 07:50 PM

yes, it looks fantastic....I really want to start on a 6ft sized SSD, but the logistics is proving more of a challenge than I expected, so maybe if I did something more like a 60 inch one

El Visitor · 12-08-2011, 07:22 AM

Wowsers!!!

How on earth have I missed this??

Looking really good, now I need to start saving money!

Mr Walker · 04-12-2012, 06:06 AM

I wonder what happened to this....

OP, any progress pics?

Jaxonrodd1980 · 04-12-2012, 06:49 AM

no doubt, here are many of talented people

		Replica Props	Screen Used Props	Replica Costumes	Sculpture and Makeup	General Modeling	Studio Scale Models	Movie Discussion
	Collaborate, create, and collect at the internet's largest community dedicated to props, costumes and models.

01-15-2010, 02:44 PM	#1
omes72 Join Date: Jun 2009 Location: Gold coast Queensland Terra Australis Posts: 623	38" SUPER STAR DESTROYER 'Executor' Hi everyone. this was my first resin kit. A good size to kick off. i saw Lee Fury's lit one & had to have it. i was fortunate to find it on ebay. I was stoked. I had never done lighting before so had no idea what I was doing really. Over the last year being on the boards I have learnt all the skills from all the fantastic people I have been fortunate to meet. Attached are some of the build pictures from along my journey into resin kits with lighting. I am still new to this hobby/art & still have much to learn. I thank everyone for their guidance & support. i hope to have this model finished by July this year. I have only just learnt how to do LED lighting & Fibre Optics. Alot of resin had to be removed to allow for lighting of this model & alot of fibre will be used to light it. Unfortunately this one of the last kits cast & there are quite alot of pits, micro bubbles & bits the resin didn't get into on the buildings. These won't show up too much though can be seen in some of the beginning close ups. A great kit though & has been a challenging learning curb. The full build can be viewed here http://www.studioscalemodelers.com/f...?tid=48&page=1 Attached Thumbnails Last edited by omes72; 01-31-2010 at 08:39 PM.

01-15-2010, 10:26 PM	#2
Hebinator Brak's other Buddy Join Date: Nov 2009 Location: Grand Junction, Colorado Posts: 290	Re: My first resin kit 38" Executor Every time I see this kit I wanna build it. As soon as I get some of my other projects out of the way I am definately going to give this a shot. Your progress is looking great!

01-17-2010, 01:02 AM	#3
omes72 Join Date: Jun 2009 Location: Gold coast Queensland Terra Australis Posts: 623	Re: My first resin kit 38" Executor Get the new kit when its finished, 6ft! Bigger is better, Thanks.

01-17-2010, 01:52 AM	#4
Hebinator Brak's other Buddy Join Date: Nov 2009 Location: Grand Junction, Colorado Posts: 290	Re: My first resin kit 38" Executor Man, 6ft of awesome......sounds like something that I need in my house. Do you think my wife would notice?

( Don't want to see advertising between posts? Register for free and become a member of our community! )
RPF Sponsors

01-17-2010, 04:51 AM	#5
omes72 Join Date: Jun 2009 Location: Gold coast Queensland Terra Australis Posts: 623	Re: My first resin kit 38" Executor Just say its a new dining table... ok so some more drilling & threading. Broke aboy 8 drill pieces today as when I hit thick spots the drill piece just gets bogged & snaps Got the LED's for the engines wired up & couldn't help but do a light test. Am way ahead of myself as I need to strip the primer as its flaking off. Some idiot didn't wash the pieces properly I will also need to install all the fibre optics before putting the lights in the engines. Its going to be quite busy inside this mother. Sorta get the idea of what will be. I thank & curse Lee Fury for doing this to me. Without wanting to do what he did this would not be happenning Attached Thumbnails

01-18-2010, 12:38 AM	#6
yuumi2891103 Join Date: Jan 2010 Location: Small local town near Narita airport Posts: 383	Re: My first resin kit 38" Executor Woow! that's A great build Nice and precise detail ! May I ask, the last few photos in a first post, You taped some bunch of optic fiber together after stick out through the halls. What is that for ? It's going to be a really 'Heavy' model. Cheers katsu from Japan,

01-18-2010, 12:45 AM	#7
GCLAMBERT89 Join Date: Jun 2009 Location: Yavin Posts: 74	Re: My first resin kit 38" Executor thats sick! I saw a model kit very much like this one on ebay a few months ago. I was very eagered to get it but i held back. I wish now that i had bought it.

01-18-2010, 01:09 AM	#8
omes72 Join Date: Jun 2009 Location: Gold coast Queensland Terra Australis Posts: 623	Re: My first resin kit 38" Executor Thanks everyone. This kit is offered here by this guy here be quick only a couple left. http://www.therpf.com/f11/korbanth-38-super-star-destroyer-model-74809/ Theres a couple left so be quick. Its been remoulded & cast & is well worth the money. If you want to light it be ready for the work. The top picture of the fibre optic is where Ive threaded fibre optic through building pieces & secured it with tape as I have not yet glued/attached the fibre yet. Just checking whats best for that task.

01-31-2010, 08:37 PM	#9
omes72 Join Date: Jun 2009 Location: Gold coast Queensland Terra Australis Posts: 623	Re: My first resin kit 38" Executor Well its my first day off in 8years that I haven't one or two kids with me With my son now in Prep(first year). Theyre both at school. Sort of sad really but now I got one day to build, walk, go to the beach with the dogs or whatever So back to this time consuming fibre optic LED eating monster I started. Ive spent the morning (3hours) threading the last of my 500ft of fibre optic & just made it to the finish line on my 3rd piece. Yep 3rd piece! Theres 500ft of fo on 3 pieces. Guess I'll be placing an order. Lucky I gave up drinking So this is it my 3rd piece of threaded fo building with a quick light test to keep myself & everyone else amused & interested Still got plenty to thread & theyre just the add on sections.......... Attached Thumbnails

02-02-2010, 05:41 AM	#10
bigbluejavelin Join Date: Jan 2010 Location: Akron, Ohio Posts: 6	Re: 38" SUPER STAR DESTROYER 'Executor' Thanks for posting this thread, I should be getting my 38" SSD tomorrow, so I will be following this one closely. I'm guessing you are using .25mm optic strands? Are you planning on using all the same size, or are you going to toss in a few different sizes to break it up a bit? How about color of the LEDs? I'm thinking about using a mix of white and "warm white" with maybe a few random blues and reds and yellows sparsely spread about.

02-05-2010, 02:30 PM	#11
omes72 Join Date: Jun 2009 Location: Gold coast Queensland Terra Australis Posts: 623	Re: 38" SUPER STAR DESTROYER 'Executor' Thanks. Yep 0.25mm fibre optic. You'll need atleast 2000ft of it also if you want to light this bad boy up well. Your lighting idea sound good. Im just going to stick with the blue but have a couple of red here & there. Its alot of work but am sure its going to be worth it once its done.

02-05-2010, 07:20 PM	#12
bigbluejavelin Join Date: Jan 2010 Location: Akron, Ohio Posts: 6	Re: 38" SUPER STAR DESTROYER 'Executor' Yep, got it Wed, and every time I look at it I feel all warm an fuzzy! If I hadn't discovered this forum, I would have missed out on what promises to be the most awesome build.

06-29-2011, 02:23 PM	#14
rgjacket Join Date: Apr 2011 Posts: 9	Re: 38" SUPER STAR DESTROYER 'Executor' just got a 38inch super star destroyer today and hope to light it as you have done. where do you get the drill bits from? as for lighting did you use lots of led light inside or a fluorescent tube arangement? any help would be great as this is the 1st time ive done one on this scale.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
38" SUPER STAR DESTROYER 'Executor'	rgjacket	General Modeling	11	07-31-2011 08:26 AM
17.5" Super Star Destroyer	thunderbearr	General Modeling	6	07-15-2008 09:34 AM
38" Super Star Destroyer Executor	Korbanth	General Modeling	97	09-30-2007 11:21 PM

06-29-2011, 10:04 PM	#15
apokai Join Date: Feb 2011 Posts: 67	Re: 38" SUPER STAR DESTROYER 'Executor' Hey rgjacket, I received mine too! I got fiber and drill bits on ebay. Did not start it yet. Searching for a used press drill to help me out. The skinning-off part of the model is scarring me a little though.

06-30-2011, 04:09 AM	#16
Noumcea Join Date: Jun 2010 Location: Australia - out in the bush Posts: 95	Re: 38" SUPER STAR DESTROYER 'Executor' Fellow Aussie, The build is looking most excellent. Over 2000 feet of FO, I am impressed. Will you have some update pics soon as the last were a fair while ago. I live about 6 hrs from the Gold Coast so next time I head up that way, mind if I drop in for a look see at all of your work and maybe have a few brewski's ? Cheers. Dave.

06-30-2011, 08:09 AM	#17
rgjacket Join Date: Apr 2011 Posts: 9	Re: 38" SUPER STAR DESTROYER 'Executor' Cheers Apoaki E bay here i come !

07-17-2011, 09:55 AM	#18
rgjacket Join Date: Apr 2011 Posts: 9	Re: 38" SUPER STAR DESTROYER 'Executor' has any one tryed useing Cold Cathode 12" Tubes to light the inside of this or any other model then use fiber optics to direct the light out? ColdCath12 Blue 12 Cold Cathode - Fiber Optic Products, Inc. will this work? as im rubbish at electrics and wireing.

07-28-2011, 08:02 AM	#19
apokai Join Date: Feb 2011 Posts: 67	Re: 38" SUPER STAR DESTROYER 'Executor' Seems a little bit complicated for the result. Last edited by apokai; 07-28-2011 at 09:09 AM.

07-28-2011, 02:15 PM	#20
The Batfan Join Date: Jul 2011 Location: US, GA Posts: 32	Re: 38" SUPER STAR DESTROYER 'Executor' WOW this will be just Stellar when finished cant wait to see the end results

12-05-2011, 07:50 PM	#21
Korbanth Join Date: Dec 2001 Location: Arizona Posts: 1,054	Re: 38" SUPER STAR DESTROYER 'Executor' yes, it looks fantastic....I really want to start on a 6ft sized SSD, but the logistics is proving more of a challenge than I expected, so maybe if I did something more like a 60 inch one

12-08-2011, 07:22 AM	#22
El Visitor Join Date: Aug 2011 Posts: 56	Re: 38" SUPER STAR DESTROYER 'Executor' Wowsers!!! How on earth have I missed this?? Looking really good, now I need to start saving money!

04-12-2012, 06:06 AM	#23
Mr Walker Join Date: Nov 2009 Posts: 61	Re: 38" SUPER STAR DESTROYER 'Executor' I wonder what happened to this.... OP, any progress pics?

04-12-2012, 06:49 AM	#24
Jaxonrodd1980 Banned Join Date: Apr 2012 Posts: 3	Re: 38" SUPER STAR DESTROYER 'Executor' no doubt, here are many of talented people