Y-Wing Red Jammer

MonsieurTox · 11-23-2011, 09:04 AM

That's been a long time I havent posted (and a long time I have not been able to work on my model).

This one was started several months ago, unfortunatly too much work and not enough time to continue... Then this week I have a few days off so I can work a bit on it !

I will go for an idealized Red Jammer, it will have some symetrical details the Gold Y have but that the Red dont have since it was half finished.

Guy Cowen · 11-23-2011, 09:14 AM

Beautiful work as always Julien

jedimaster · 11-23-2011, 09:45 AM

Nice one mate..... But I hope ya don't think ya gonna get all this info for free.

ralphee · 11-23-2011, 10:42 AM

Blimey, where did this one come from? Super work Julien, theres a lot of it about, nice to see her in styrene.

lee

-... . .- --.. · 11-23-2011, 12:27 PM

Nice! Go Julien, go!

Love the look of that substructure. You must've spent a lot of time figuring out the dimensions for all of that.

IEDBOUNTYHUNTER · 11-23-2011, 12:56 PM

Looking Good Julien.

ckwanwoo · 11-23-2011, 05:59 PM

Cheers~! My friend

Thanks Eric

roback · 11-23-2011, 06:48 PM

WOWWW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! .Very nice and fine work!!!!!!!!!!!!!!! Amazing Job Congrats!

MonsieurTox · 11-23-2011, 08:23 PM

Quote:

Originally Posted by jedimaster

But I hope ya don't think ya gonna get all this info for free.

Haha !

Thank you very much guys, I have been working on some more subassemblies (they're in rubber right now) like the pattern used several times on the engines.

MonsieurTox · 11-23-2011, 08:29 PM

Quote:

Originally Posted by -... . .- --..

Nice! Go Julien, go!

Love the look of that substructure. You must've spent a lot of time figuring out the dimensions for all of that.

Thanks Kevin,

Yeah it took quite some times to figure out the dimensions, I know I'm not 100% accurate but I tried to be as close as I could get with the kitparts I had in hands when I drew the plans. Building it was not easy either... Well now I'm working on the neck, it's hard too, I hope I'll get something close enough...

IEDBOUNTYHUNTER · 11-24-2011, 08:52 AM

Love it Julien. Your build inspires me to build a Y. Scratch built of course.

Al

MonsieurTox · 12-05-2011, 10:58 AM

Thank Al, you should finish your Betty first

I did some more progress and I finally built the neck... Wasnt easy !

I started to scratch the parts I'm missing (Sealab) on the neck, gonna scratch more parts (maybe not the Lancaster one, I could buy the kit someday). I used the Tamiya King Tiger II instead of the Nichimo as I didnt find one for a fair price.

Thanks for watching

ralphee · 12-05-2011, 11:27 AM

Julien wow, just WOW, loving this. Looks great with the neck on, nice casting on the plant on's too!

lee

darth_daniel · 12-05-2011, 11:34 AM

Julien that looks awesome! I´m very envious!

Guy Cowen · 12-05-2011, 02:02 PM

Are you really sure your happy with that Julien, I think I've noticed a few area's that may be stunning, there are some areas that look a bit spot on, and some that may be accurate to say the least.

I also bet you did this before breakfast

Scratchy · 12-05-2011, 05:27 PM

Once a person passes the borders into France, they must adjust to those 48 hour days..... I just don't know where you get all this time from MonsieurTox.

I hope you have a room set aside for all these wonderful builds that you're creating.

ralphee · 12-05-2011, 05:33 PM

Quote:

Originally Posted by Guy Cowen

Are you really sure your happy with that Julien, I think I've noticed a few area's that may be stunning, there are some areas that look a bit spot on, and some that may be accurate to say the least.

I also bet you did this before breakfast

Nawww he did it during breakfast Guy lol.

Lee

jedimaster · 12-05-2011, 05:34 PM

Julien...let me know the exact parts you need and I'll cast em up this weekend for ya. Looks sweet.

Simon.

Scott Graham · 12-05-2011, 07:08 PM

You're so proficient at making this stuff. Amazing as always Julien. Thanks for showing us how you're doing it. I have much respect for your talents and your willingness to share.

ckwanwoo · 12-05-2011, 08:19 PM

Awesome~

Julien! Please don't make any ANH ship.
ANH is my working area ha ha

thanks Eric

Gort · 12-06-2011, 07:13 AM

Looking good Julien, as ever. Seeing this build up is bringing back memories of long evening spent scrutinising Y-wing parts!

I always had a hunch that the whole underside of the neck was a 1/12 F1 drivers tub. It just seems such an odd shape to scratch and seems very close to other tubs I've seen. Just could never confirm or deny this though.

Nick

MonsieurTox · 12-14-2011, 05:01 PM

Thanks you very much for your comment guys !

Thanks Scott, I'm glad you enjoy the thread, I enjoy building this bugger !

Eric, haha dont worry I'll stop making ANH stuff... after the Sandcrawler and Turbo Laser !

Nick, thank you very much I respect so much the work you did on the first kit ! The Y is really hard to nail :s I'm doing my best !

Yeah each time I look through my F1 kits I think "Yeaaah I found it !" then I realize that I said that 10 times before with the same part and that it's wrong lol

I found some old pics of the very beginning :

The master of the back of the cockpit, I will rebuilt it once I got my Nichimo King Tiger :

3d-builder · 12-14-2011, 05:47 PM

That's just freaking awesome!

roback · 12-14-2011, 09:17 PM

Uffff.....amazing Job!!!!!!!!.. congrats!!!!!!

Ray22 · 12-16-2011, 01:03 PM

As Vader said Most impressive!

		Replica Props	Screen Used Props	Replica Costumes	Sculpture and Makeup	General Modeling	Studio Scale Models	Movie Discussion
	Collaborate, create, and collect at the internet's largest community dedicated to props, costumes and models.

11-23-2011, 09:04 AM	#1
MonsieurTox Join Date: Jun 2006 Location: Paris, France Posts: 2,807	Y-Wing Red Jammer That's been a long time I havent posted (and a long time I have not been able to work on my model). This one was started several months ago, unfortunatly too much work and not enough time to continue... Then this week I have a few days off so I can work a bit on it ! I will go for an idealized Red Jammer, it will have some symetrical details the Gold Y have but that the Red dont have since it was half finished.

11-23-2011, 09:14 AM	#2
Guy Cowen Guy Staff Join Date: Nov 2006 Location: Manchester, UK Posts: 2,597	Re: Y-Wing Red Jammer Beautiful work as always Julien

11-23-2011, 09:45 AM	#3
jedimaster Join Date: Nov 2009 Location: Planet Perth Posts: 1,785	Re: Y-Wing Red Jammer Nice one mate..... But I hope ya don't think ya gonna get all this info for free.

11-23-2011, 10:42 AM	#4
ralphee Join Date: Apr 2005 Location: Birmingham,England. Posts: 4,622	Re: Y-Wing Red Jammer Blimey, where did this one come from? Super work Julien, theres a lot of it about, nice to see her in styrene. lee

( Don't want to see advertising between posts? Register for free and become a member of our community! )
RPF Sponsors

11-23-2011, 12:27 PM	#5
-... . .- --.. Join Date: Feb 2000 Posts: 3,519	Re: Y-Wing Red Jammer Nice! Go Julien, go! Love the look of that substructure. You must've spent a lot of time figuring out the dimensions for all of that.

11-23-2011, 12:56 PM	#6
IEDBOUNTYHUNTER Modelmaker for Hire Join Date: Jan 2009 Location: TexASS Posts: 882	Re: Y-Wing Red Jammer Looking Good Julien.

11-23-2011, 05:59 PM	#7
ckwanwoo Join Date: Dec 2005 Location: South Korea Posts: 473	Re: Y-Wing Red Jammer Cheers~! My friend Thanks Eric

11-23-2011, 06:48 PM	#8
roback Join Date: Jul 2010 Posts: 69	Re: Y-Wing Red Jammer WOWWW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!! .Very nice and fine work!!!!!!!!!!!!!!! Amazing Job Congrats!

11-24-2011, 08:52 AM	#11
IEDBOUNTYHUNTER Modelmaker for Hire Join Date: Jan 2009 Location: TexASS Posts: 882	Re: Y-Wing Red Jammer Love it Julien. Your build inspires me to build a Y. Scratch built of course. Al

12-05-2011, 10:58 AM	#12
MonsieurTox Join Date: Jun 2006 Location: Paris, France Posts: 2,807	Re: Y-Wing Red Jammer Thank Al, you should finish your Betty first I did some more progress and I finally built the neck... Wasnt easy ! I started to scratch the parts I'm missing (Sealab) on the neck, gonna scratch more parts (maybe not the Lancaster one, I could buy the kit someday). I used the Tamiya King Tiger II instead of the Nichimo as I didnt find one for a fair price. Thanks for watching

12-05-2011, 11:27 AM	#13
ralphee Join Date: Apr 2005 Location: Birmingham,England. Posts: 4,622	Re: Y-Wing Red Jammer Julien wow, just WOW, loving this. Looks great with the neck on, nice casting on the plant on's too! lee

12-05-2011, 11:34 AM	#14
darth_daniel Join Date: Aug 2007 Posts: 355	Re: Y-Wing Red Jammer Julien that looks awesome! I´m very envious!

12-05-2011, 02:02 PM	#15
Guy Cowen Guy Staff Join Date: Nov 2006 Location: Manchester, UK Posts: 2,597	Re: Y-Wing Red Jammer Are you really sure your happy with that Julien, I think I've noticed a few area's that may be stunning, there are some areas that look a bit spot on, and some that may be accurate to say the least. I also bet you did this before breakfast

12-05-2011, 05:27 PM	#16
Scratchy Join Date: Jun 2009 Location: Langley, British Columbia Canada Posts: 536	Re: Y-Wing Red Jammer Once a person passes the borders into France, they must adjust to those 48 hour days..... I just don't know where you get all this time from MonsieurTox. I hope you have a room set aside for all these wonderful builds that you're creating.

12-05-2011, 05:34 PM	#18
jedimaster Join Date: Nov 2009 Location: Planet Perth Posts: 1,785	Re: Y-Wing Red Jammer Julien...let me know the exact parts you need and I'll cast em up this weekend for ya. Looks sweet. Simon.

12-05-2011, 07:08 PM	#19
Scott Graham Join Date: Dec 2007 Posts: 1,022	Re: Y-Wing Red Jammer You're so proficient at making this stuff. Amazing as always Julien. Thanks for showing us how you're doing it. I have much respect for your talents and your willingness to share.

12-05-2011, 08:19 PM	#20
ckwanwoo Join Date: Dec 2005 Location: South Korea Posts: 473	Re: Y-Wing Red Jammer Awesome~ Julien! Please don't make any ANH ship. ANH is my working area ha ha thanks Eric

12-06-2011, 07:13 AM	#21
Gort Join Date: Jun 2006 Posts: 396	Re: Y-Wing Red Jammer Looking good Julien, as ever. Seeing this build up is bringing back memories of long evening spent scrutinising Y-wing parts! I always had a hunch that the whole underside of the neck was a 1/12 F1 drivers tub. It just seems such an odd shape to scratch and seems very close to other tubs I've seen. Just could never confirm or deny this though. Nick

12-14-2011, 05:01 PM	#22
MonsieurTox Join Date: Jun 2006 Location: Paris, France Posts: 2,807	Re: Y-Wing Red Jammer Thanks you very much for your comment guys ! Thanks Scott, I'm glad you enjoy the thread, I enjoy building this bugger ! Eric, haha dont worry I'll stop making ANH stuff... after the Sandcrawler and Turbo Laser ! Nick, thank you very much I respect so much the work you did on the first kit ! The Y is really hard to nail :s I'm doing my best ! Yeah each time I look through my F1 kits I think "Yeaaah I found it !" then I realize that I said that 10 times before with the same part and that it's wrong lol I found some old pics of the very beginning : The master of the back of the cockpit, I will rebuilt it once I got my Nichimo King Tiger :

12-14-2011, 05:47 PM	#23
3d-builder Join Date: Jan 2009 Posts: 1,410	Re: Y-Wing Red Jammer That's just freaking awesome!

12-14-2011, 09:17 PM	#24
roback Join Date: Jul 2010 Posts: 69	Re: Y-Wing Red Jammer Uffff.....amazing Job!!!!!!!!.. congrats!!!!!!

12-16-2011, 01:03 PM	#25
Ray22 Join Date: Dec 2010 Location: Bronx, New York Posts: 615	Re: Y-Wing Red Jammer As Vader said Most impressive!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Red Jammer Y-Wing FINISHED!!!!	Dymerski	Studio Scale Models	12	10-27-2009 08:18 PM
A red jammer tease UPDATE	Dymerski	Studio Scale Models	10	09-13-2009 04:11 PM
1/48 X-wing Red 3	craig g	General Modeling	12	02-11-2008 06:17 AM
SS Red Jammer Y wing!	ralphee	Studio Scale Models	23	01-13-2008 02:32 AM