SS Star Trek starships

Whiskey · 03-23-2011, 01:58 PM

Quick question for those who built, building, or plan on building star trek ships.

Normally, when trying to build a studio scale, you use references like donor kits to figure out measurements, but most don't have kits. Like shuttlecrafts and such.

Are most published measurements reliable(Christies auction or that japanese book of stArships)? If so, do you extrapolate the shape of published blueprints to "fit"?

Shaw · 03-23-2011, 07:29 PM

Well, I don't use published plans... I draw my own. I reverse engineer everything from photos (I majored in mathematics, so it becomes a fun geometry puzzle) using actual measurements where ever possible. In the case of the 11 foot Enterprise model, I have over 500 reference photos (some include shots of the model disassembled and placed next to rulers) with a ton of additional raw measurements.

When I first started working on my plans for the 33 inch Enterprise model, the biggest hurdle was getting reference measurements because the model has been missing since 1978. But I was able to get a ton of measurements from the original construction plans (the plans were one-to-one for the 33 inch model and one-quarter scale to the 11 foot model), which gave me the gauge I needed to gather data.

I've made most of my research public... including a reverse engineering of the construction plans (here) and a first draft of my 33 inch model plans (here).

To check my work on the 33 inch model, I did a test build based on my plans so I could do comparisons with existing photos of the original model. Here are four examples...

Comparison 1
Comparison 2
Comparison 3
Comparison 4
Comparison 5

... and based on that work, I've collected together notes that I'm using to revise my plans before making another attempt (hopefully using the same materials as the original model). My model building skills aren't as good as others, but I've been doing my best.

That is how I've approached the problem. In the case of the 33 inch model, I don't know of anyone else who has attempted to do plans of it before me, so I was figuring out how to move forward on it on my own.

But I've had a pretty good time in the process, so no complaints.

		Replica Props	Screen Used Props	Replica Costumes	Sculpture and Makeup	General Modeling	Studio Scale Models	Movie Discussion
	Collaborate, create, and collect at the internet's largest community dedicated to props, costumes and models.

03-23-2011, 01:58 PM	#1
Whiskey Join Date: May 2005 Location: Ca Posts: 304	SS Star Trek starships Quick question for those who built, building, or plan on building star trek ships. Normally, when trying to build a studio scale, you use references like donor kits to figure out measurements, but most don't have kits. Like shuttlecrafts and such. Are most published measurements reliable(Christies auction or that japanese book of stArships)? If so, do you extrapolate the shape of published blueprints to "fit"? Last edited by Whiskey; 03-23-2011 at 03:25 PM.

03-23-2011, 07:29 PM	#2
Shaw Join Date: Jan 2010 Location: Twin Cities, MN Posts: 95	Re: SS Star Trek starships Well, I don't use published plans... I draw my own. I reverse engineer everything from photos (I majored in mathematics, so it becomes a fun geometry puzzle) using actual measurements where ever possible. In the case of the 11 foot Enterprise model, I have over 500 reference photos (some include shots of the model disassembled and placed next to rulers) with a ton of additional raw measurements. When I first started working on my plans for the 33 inch Enterprise model, the biggest hurdle was getting reference measurements because the model has been missing since 1978. But I was able to get a ton of measurements from the original construction plans (the plans were one-to-one for the 33 inch model and one-quarter scale to the 11 foot model), which gave me the gauge I needed to gather data. I've made most of my research public... including a reverse engineering of the construction plans (here) and a first draft of my 33 inch model plans (here). To check my work on the 33 inch model, I did a test build based on my plans so I could do comparisons with existing photos of the original model. Here are four examples... Comparison 1 Comparison 2 Comparison 3 Comparison 4 Comparison 5 ... and based on that work, I've collected together notes that I'm using to revise my plans before making another attempt (hopefully using the same materials as the original model). My model building skills aren't as good as others, but I've been doing my best. That is how I've approached the problem. In the case of the 33 inch model, I don't know of anyone else who has attempted to do plans of it before me, so I was figuring out how to move forward on it on my own. But I've had a pretty good time in the process, so no complaints. Last edited by Shaw; 03-23-2011 at 07:56 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
carving starships!	pyxl	Studio Scale Models	7	07-10-2009 09:48 AM
Battle Damaged Starships?	peter1701	General Modeling	12	06-12-2003 01:03 AM

( Don't want to see advertising between posts? Register for free and become a member of our community! )
RPF Sponsors