Project sealab

Falk · 08-26-2011, 03:07 AM

Quote:

Originally Posted by joewhite

Funny you mention this, Lee. I've thought about doing what Jason and Mike are doing here with the 312B. Maybe not at the level they are doing but at least to help out a few peeps. I'm going to have to do it for my 223 Pod anyway.

Joe

I guess Lee meant the large Entex Porsche kit which sells for insane $$$

Cheers,
Falk

moffeaton · 08-26-2011, 06:32 AM

Well, not to ruin the surprise, but that will be next, after the Sealab! I'm on it!

eagle1 · 08-26-2011, 06:50 AM

Ooohhh, great news Jason & many thanks Mike for doing the casting.
I'd definetly be in for a 5' Falcon set, even if it is further down the track. Any chance we can be notified when it's up Jason?.
I'll try to compile a sealab parts list for this as well, just to compare.

Hey, did you get my last PM J?.
Cheers
Stu

Rats · 08-26-2011, 08:58 AM

cool.... does that mean that the Entex M23 might fall into some rubber at some time in the future as well? At least the floor-pan and the front cowling??

Please, please??

moffeaton · 08-26-2011, 11:36 AM

This one?

Yeah, I've actually done that already to make this:

What do ya need castings for if I may ask? That kit was over a grand!

joewhite · 08-26-2011, 12:15 PM

Quote:

Originally Posted by Falk

I guess Lee meant the large Entex Porsche kit which sells for insane $$$

Cheers,
Falk

Haha! Wow, yeah, big duh on my part!!!

Funny I forgot about that kit! I guess I'm still only worrying about $100 kits.

Joe

Rats · 08-27-2011, 01:24 PM

Quote:

Originally Posted by moffeaton

What do ya need castings for if I may ask? That kit was over a grand!

Well, I don't neeeed castings....but it would be about the only way I could ever build a Firefly.. I know that kit is f*$$%ng expensive.

I only mentioned it as it showed up in your picture

moffeaton · 08-27-2011, 01:58 PM

Hello fellow MaK fan!

I think I have a spare casting in the basement - will dig it out this weekend if the hurricane doesn't mess things up!

joewhite · 08-29-2011, 03:42 PM

Quote:

Originally Posted by moffeaton

Hello fellow MaK fan!

I think I have a spare casting in the basement - will dig it out this weekend if the hurricane doesn't mess things up!

Everything ok at home, Jason? No weather damage, I hope!

Joe

moffeaton · 08-29-2011, 05:26 PM

NOt terrible, we were lucky!

Rats · 08-30-2011, 12:25 AM

Hi Jason,

Hope you survived the hurricane! Did you lose power or get damp? My sister lived in Pasadena for a few years, but I don't remember her ever talking about a hurricane. It must be a fairly unusual event in MD?

Anyway, thanks for checking on a the M23. Probably better to PM with details, rather than take this thread off track too far.

Cheers, John

steve48442 · 10-27-2011, 09:27 AM

anyone doing castings of the sealab i would be interested in some parts to do an x wing

moffeaton · 10-27-2011, 01:43 PM

Yep, still happening - just a little delayed as our resident master caster takes care of Neisen's back orders

swpropmaker · 10-27-2011, 03:18 PM

Hey now..

Apophis · 10-27-2011, 05:37 PM

Well, thats good news, i guess for me? lol!

moffeaton · 10-27-2011, 06:59 PM

LOL, hey, I'm not complaining - I'm excited! 2012 is going to be a mind blowing year for the spaceship gang!

Apophis · 10-27-2011, 07:46 PM

No, im not complaining, not at all, im starting a new job in a month and that will give me more time to save up the funds!

KrokoHunter · 10-28-2011, 05:03 PM

would "mindblowing" by any chance be slang for "wallet emptying" ???

Can't wait, though

wizardofthenorth · 10-28-2011, 07:21 PM

Hmmm, this is the 2nd big drop I have heard on RPF about some big upcoming projects. Any teasers..hints...clues?

Quote:

Originally Posted by moffeaton

LOL, hey, I'm not complaining - I'm excited! 2012 is going to be a mind blowing year for the spaceship gang!

moffeaton · 10-28-2011, 10:31 PM

The Neisen Y-Wing, the Sealab stuff, Randy Cooper's Spinner, the progress people are making on the 5 foot Falcon, the Slave One I'm working towards, the Blade Runner Blimp I'll have finished... and maybe a surprise or two, here or there... sure!

Tsophika · 12-11-2011, 06:44 AM

Here is my updated part list for the Falcon. I nabbed a few new ones but many thanks go to the other eagle eyes out there. Also, sorry if this makes Mike say fuhgeddaboudit and run for the hills.

Craig

5 foot Millennium Falcon
1 (x2)
4 (x14)
1, 2, 3, or 4 (Struts only. A total of 20 struts are needed. 16 of them can be cut off from 1 and 4 above.)
11 (x8)
12 (x2)
23 (x4)
24 (x10)
25 (x1)
26 (x2)
33 (x8)
41 (x4)
45 (x1)
56 (x11)
65 (x3)
70 (x1)
71 (x1)
78 (x8)
79 (x8)
84 (x1)

greeble_gremlin · 01-04-2012, 05:09 PM

This is a great project...many thanks

darth_myeek · 01-04-2012, 07:23 PM

Not an interest/sign up thread. It's to identify sealab parts used in SS models.

moffeaton · 01-04-2012, 08:37 PM

Thanks Craig, I will update now!

Quote:

Originally Posted by Tsophika

Here is my updated part list for the Falcon. I nabbed a few new ones but many thanks go to the other eagle eyes out there. Also, sorry if this makes Mike say fuhgeddaboudit and run for the hills.

Craig

5 foot Millennium Falcon
1 (x2)
4 (x14)
1, 2, 3, or 4 (Struts only. A total of 20 struts are needed. 16 of them can be cut off from 1 and 4 above.)
11 (x8)
12 (x2)
23 (x4)
24 (x10)
25 (x1)
26 (x2)
33 (x8)
41 (x4)
45 (x1)
56 (x11)
65 (x3)
70 (x1)
71 (x1)
78 (x8)
79 (x8)
84 (x1)

		Replica Props	Screen Used Props	Replica Costumes	Sculpture and Makeup	General Modeling	Studio Scale Models	Movie Discussion
	Collaborate, create, and collect at the internet's largest community dedicated to props, costumes and models.

08-26-2011, 06:32 AM	#77
moffeaton Hey there, Blimpy Boy... Join Date: Mar 2001 Location: Baltimore MD Posts: 6,534	Re: Project sealab Well, not to ruin the surprise, but that will be next, after the Sealab! I'm on it!

08-26-2011, 06:50 AM	#78
eagle1 Join Date: Mar 2007 Location: New Zealand Posts: 557	Re: Project sealab Ooohhh, great news Jason & many thanks Mike for doing the casting. I'd definetly be in for a 5' Falcon set, even if it is further down the track. Any chance we can be notified when it's up Jason?. I'll try to compile a sealab parts list for this as well, just to compare. Hey, did you get my last PM J?. Cheers Stu

08-26-2011, 08:58 AM	#79
Rats Join Date: Jun 2008 Posts: 214	Re: Project sealab cool.... does that mean that the Entex M23 might fall into some rubber at some time in the future as well? At least the floor-pan and the front cowling?? Please, please??

08-26-2011, 11:36 AM	#80
moffeaton Hey there, Blimpy Boy... Join Date: Mar 2001 Location: Baltimore MD Posts: 6,534	Re: Project sealab This one? Yeah, I've actually done that already to make this: What do ya need castings for if I may ask? That kit was over a grand!

( Don't want to see advertising between posts? Register for free and become a member of our community! )
RPF Sponsors

08-27-2011, 01:58 PM	#83
moffeaton Hey there, Blimpy Boy... Join Date: Mar 2001 Location: Baltimore MD Posts: 6,534	Re: Project sealab Hello fellow MaK fan! I think I have a spare casting in the basement - will dig it out this weekend if the hurricane doesn't mess things up!

08-29-2011, 05:26 PM	#85
moffeaton Hey there, Blimpy Boy... Join Date: Mar 2001 Location: Baltimore MD Posts: 6,534	Re: Project sealab NOt terrible, we were lucky!

08-30-2011, 12:25 AM	#86
Rats Join Date: Jun 2008 Posts: 214	Re: Project sealab Hi Jason, Hope you survived the hurricane! Did you lose power or get damp? My sister lived in Pasadena for a few years, but I don't remember her ever talking about a hurricane. It must be a fairly unusual event in MD? Anyway, thanks for checking on a the M23. Probably better to PM with details, rather than take this thread off track too far. Cheers, John

10-27-2011, 09:27 AM	#87
steve48442 Join Date: Feb 2011 Location: holly michigan Posts: 21	Re: Project sealab anyone doing castings of the sealab i would be interested in some parts to do an x wing

10-27-2011, 01:43 PM	#88
moffeaton Hey there, Blimpy Boy... Join Date: Mar 2001 Location: Baltimore MD Posts: 6,534	Re: Project sealab Yep, still happening - just a little delayed as our resident master caster takes care of Neisen's back orders

10-27-2011, 03:18 PM	#89
swpropmaker Join Date: Nov 2001 Posts: 1,313	Re: Project sealab Hey now..

10-27-2011, 05:37 PM	#90
Apophis Join Date: Jun 2006 Location: Fishersville, Va/Chulak Posts: 742	Re: Project sealab Well, thats good news, i guess for me? lol!

10-27-2011, 06:59 PM	#91
moffeaton Hey there, Blimpy Boy... Join Date: Mar 2001 Location: Baltimore MD Posts: 6,534	Re: Project sealab LOL, hey, I'm not complaining - I'm excited! 2012 is going to be a mind blowing year for the spaceship gang!

10-27-2011, 07:46 PM	#92
Apophis Join Date: Jun 2006 Location: Fishersville, Va/Chulak Posts: 742	Re: Project sealab No, im not complaining, not at all, im starting a new job in a month and that will give me more time to save up the funds!

01-04-2012, 05:09 PM	#97
greeble_gremlin Join Date: Aug 2007 Location: Earth Posts: 162	Re: Project sealab This is a great project...many thanks Last edited by greeble_gremlin; 01-04-2012 at 09:14 PM.

10-28-2011, 05:03 PM	#93
KrokoHunter Join Date: Mar 2004 Location: Denmark Posts: 191	Re: Project sealab would "mindblowing" by any chance be slang for "wallet emptying" ??? Can't wait, though

10-28-2011, 10:31 PM	#95
moffeaton Hey there, Blimpy Boy... Join Date: Mar 2001 Location: Baltimore MD Posts: 6,534	Re: Project sealab The Neisen Y-Wing, the Sealab stuff, Randy Cooper's Spinner, the progress people are making on the 5 foot Falcon, the Slave One I'm working towards, the Blade Runner Blimp I'll have finished... and maybe a surprise or two, here or there... sure!

12-11-2011, 06:44 AM	#96
Tsophika T-16 Bush Pilot Join Date: Dec 2010 Posts: 123	Re: Project sealab Here is my updated part list for the Falcon. I nabbed a few new ones but many thanks go to the other eagle eyes out there. Also, sorry if this makes Mike say fuhgeddaboudit and run for the hills. Craig 5 foot Millennium Falcon 1 (x2) 4 (x14) 1, 2, 3, or 4 (Struts only. A total of 20 struts are needed. 16 of them can be cut off from 1 and 4 above.) 11 (x8) 12 (x2) 23 (x4) 24 (x10) 25 (x1) 26 (x2) 33 (x8) 41 (x4) 45 (x1) 56 (x11) 65 (x3) 70 (x1) 71 (x1) 78 (x8) 79 (x8) 84 (x1)

01-04-2012, 07:23 PM	#98
darth_myeek Join Date: Dec 2007 Posts: 1,343	Re: Project sealab Not an interest/sign up thread. It's to identify sealab parts used in SS models.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1:6 Vader Project & Digital Scan project	Too Much Garlic	General Modeling	125	04-10-2012 05:37 PM
Project Arbiter: a film project my brother is helping with	Trooper_trent	Entertainment and Movie Forum	0	04-05-2010 08:01 PM
Recasting the sealab??	Whiskey	General Modeling	8	11-16-2007 01:14 PM
Aurora sealab III or other kits for sandcrawler	thawn_es	Studio Scale Models	3	09-15-2007 10:19 AM